Timex Expedition 567-095006 NA Bedienungsanleitung

W-195 567-095006 NA

SELECTING PRESSURE AND TEMPERATURE UNITS 24

CALIBRATING THE BAROMETER 25

ALTI - ALTIMETER MODE 28

USING THE ALTIMETER 29

SELECTING ALTITUDE UNITS 30

ALTIMETER PERFORMANCE 31

CALIBRATING THE ALTIMETER AND CLEARING HIGH AND ACC 32

CHRO - CHRONOGRAPH MODE 34

TERMINOLOGY 34

USING THE CHRONOGRAPH 35

LAP/SPLIT TIMING 36

CHANGING THE DISPLAY FORMAT 37

If no laps have yet been taken: 37

If you have taken at least one lap: 38

REVIEWING STORED LAP/SPLIT TIMES 38

TIMER - COUNTDOWN TIMER MODE 40

SETTING THE COUNTDOWN TIMER 40

USING THE COUNTDOWN TIMER 41

ALARM - ALARM MODE 43

SETTING AN ALARM 43

SELECTING AND ARMING/DISARMING ALARMS 44

BACKUP ALERT 45

TRADEMARK AND WARRANTY INFORMATION 46

INTRODUCTION 4

WATCH FEATURES 5

WATCH MODES 8

BUTTON FUNCTIONS 9

NORMAL OPERATION 9

SETTING OPERATION 11

WATCH DISPLAY SYMBOLS 13

WEATHER FORECASTING 14

NOTES ON CALIBRATING THE ALTIMETER AND BAROMETER 15

WHAT IS CALIBRATION? 15

HOW OFTEN SHOULD I CALIBRATE? 15

DO I NEED TO CALIBRATE BOTH THE BAROMETER AND THE ALTIMETER? 16

TEMPERATURE ACCURACY 17

TIME - TIME OF DAY MODE 18

SETTING TIME OF DAY 19

USING THE DUAL TIME ZONE FEATURE 21

Viewing the secondary time zone 21

Switching time zones 22

VIEWING TEMPERATURE AND AIR PRESSURE DATA 22

BARO - BAROMETER MODE 23

VIEWING TEMPERATURE AND PRESSURE DATA 24

Watch Features

Time of Day

•Displays hours,minutes and seconds in 12- or 24-hour

format for two time zones.

•Displays month and date,as well as day of the week.

•Optional hourly chime.

Altimeter

•Reports altitude from -2296 to 29,520 feet (-700 to

9000 meters) with 10 ft or 5 m resolution.

•Displays current altitude as well as a graph of altitude

change over time.

•Displays accumulated total of all altitude gains,known

as “total ascent” or “climb”.

•Records highest altitude achieved.

•Selectable display units (meters or feet)

Introduction

Welcome!

Thank you for purchasing a TIMEX® EXPEDITION®

adventure tech altimeter watch. The watch is equipped

with a variety of features to enhance your outdoor

experience.So,if you are trekking the trails,skiing the

slopes or just hanging out, enjoy the journey.

Chronograph

•Time events up to 24 hours with 1/100-second

resolution.

•Store up to 30 lap/split times.

•View stored lap times as well as best (shortest) lap

time,average lap time and total event time.

Count Down Timer

•Time events up to 24 hours.An alert is generated

when the timer reaches zero.

•Timer can be set to count down to zero once or to

repeat the countdown indefinitely.

Alarm

•Five independent daily alarms,each with a five-minute

backup alert.

Barometer

•Reports air pressure from 8.85 to 32.45 inches of

Mercury (“inHg”) (300 to 1100 mbar) with 0.05 inHg

(1 mbar) resolution.

•Displays current air pressure as well as a graph of

change in air pressure over time.

•Both sea level and local (absolute) air pressure can be

displayed.

• Forecasts the weather for the next 4–6 hour period.

•Selectable display units (inHG or mbar)

Thermometer

•Selectable display units (°F or °C)

•Reports current air temperature from 14 to 140 °F

(-10 to 60 °C).

TIMER - The Countdown Timer is useful for timing

fixed-time events

ALARM -Five daily alarms to keep you on time

TIP: Press and hold the MODE button for three seconds to

go directly to TIME mode from any other mode in the

watch.

Button Functions

The buttons on your watch are multi-functional, serving

two main purposes - enabling you to perform everyday

functions like checking the time and timing a workout,

and setting things like Time of Day or an Alarm.

Normal Operation

The buttons on your watch largely operate in the same

way from mode to mode and the primary functions for

them are printed on the case itself.This section describes

the typical functions of the buttons.

INDIGLO® Night-Light

Watch Modes

The features of this watch are grouped into modes that

are accessible by pressing and releasing the MODE button

– each depression of the MODE button takes you to the

next mode in the loop.The modes are arranged in the

following order:

TIME > BARO > ALTI > CHRO > TIMER > ALARM

TIME - Displays the time of day and date as well as

weather info

BARO - View air pressure,temperature & weather

information

ALTI - Presents altitude and temperature data

CHRO - Use the Chronograph for timing purposes

Setting Operation

When setting Time of Day,Alarms or the Countdown Timer

and so on, the button functions change from what is print-

ed on the case.

NOTE: These setting functions are the same in any mode

where you can set a value.

1. Press and hold the SET button. While you are holding

the button, “HOLD ADJUST” will appear on the display.

2. After a couple of seconds,the “HOLD” message will

disappear followed by a flashing value.

3. Change the flashing value by pressing either

START/SPLIT (to increase) or STOP/RESET

(to decrease). Press and hold the button to

increase/decrease the value quickly.

4. When the flashing value is set as intended, press

MODE to advance to the next value.1110

SET START / SPLIT

INDIGLO®

STOP / RESET

MODE

Watch Display Symbols

Alarm is armed (flashing if backup alarm is active)

Chronograph is running

Hourly Chime is enabled

Countdown Timer is running

Indicates weather forecast

5. Repeat steps 3 and 4 for each of the values you wish

to set.

TIP: If you accidentally skip past a setting, continue to

press and release the MODE button to move all the way

through the settings and back to the one that requires

adjustment.

6. When you are satisfied that everything is set as

intended, press the SET button to save your settings

and exit.

1312

PRESS TO EXIT SETTING

PRESS FOR NEXT VALUE

INCREASE FLASHING VALUE

LAMP

DECREASE FLASHING VALUE

Notes on calibrating the Altimeter and Barometer

The watch relies on a sensitive electronic sensor to

measure the air pressure and temperature.This sensor

must be calibrated periodically to maintain the high degree

of accuracy you expect from the watch.

What is calibration?

“Calibration” is simply a technique to improve the accura-

cy of the pressure/temperature sensor,primarily by com-

pensating for local temperature and weather effects.The

watch employs two related methods of calibration, using

either sea level pressure or the local altitude as a refer-

ence,depending on the watch mode used for calibration.

How often should I calibrate?

Timex recommends that you calibrate the sensor prior to

any activity where you will be using the altimeter feature

Weather Forecasting

The watch can predict the weather for the upcoming 4 - 6

hour period based on the air pressure trend information for

the previous twelve hours.The weather forecast is indicated

at the top of the watch display by a series of symbols.

Generally,if the air pressure is rising, the weather situation is

considered to be improving and is indicated by the presence

of the sun symbol. If the air pressure trend is falling, then the

weather situation is worsening and is indicated by showing

the clouds and/or precipitation symbols.

The weather forecast is always visible in TIME and BARO

modes and visible in ALTI mode when no altitude changes

are detected.

1514

CONDITIONS

reference source available.

For example,if you are standing at a trail head and know

the correct altitude,then the most accurate calibration will

be obtained by calibrating within ALTI mode (since it relies

on altitude as the reference). However,if you don’t know

your altitude,you can find out the current sea level pres-

sure (published online or in a newspaper) and calibrate the

sensor within BARO mode. For example,the U.S.weather

service publishes the sea-level pressure for all of its

stations at http://www.weather.gov

Temperature Accuracy

When worn on your wrist, the thermometer reading is

affected by body heat and may report a temperature

different from the actual air temperature by 10 degrees or

more.Long periods of exposure to direct sunlight may also

affect the accuracy. Try wearing the watch outside your

and then again whenever you experience significant

changes in altitude or temperature during your activity.

If you are not using the altimeter feature,then daily

calibration will maintain the accuracy of the barometer

and weather forecasting feature.

Whenever possible,the sensor should be calibrated soon

after you experience significant temperature changes.

Do I need to calibrate both the Barometer and the

Altimeter?

No.BARO mode calibrates the sensor based upon the sea

level air pressure,while ALTI allows you to calibrate the

sensor by telling the watch about your current altitude.

Calibration performed in either mode will calibrate the

sensor for all modes. For the best accuracy,we recom-

mend that you choose only one calibration method each

time you calibrate the sensor,based on the most accurate

1716

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Timex Betrachten Handbücher

Timex

Timex W-213 Bedienungsanleitung

Timex

Timex IRONMAN ONE GPS+ Bedienungsanleitung

Timex

Timex W-141 Bedienungsanleitung

Timex

Timex W-2-US Bedienungsanleitung

Timex

Timex UFC KNOCKOUT Bedienungsanleitung

Timex

Timex W-292 Bedienungsanleitung

Timex

Timex RUN Trainer 2.0 W294 Bedienungsanleitung

Timex

Timex IRONMAN Classic 50 Move+ Bedienungsanleitung

Timex

Timex W-14 Bedienungsanleitung

Timex

Timex 104 Bedienungsanleitung

Timex

Timex W-105 Bedienungsanleitung

Timex

Timex IronMan Run x50+ Bedienungsanleitung

Timex

Timex Marathon Bedienungsanleitung

Timex

Timex W-154-US Bedienungsanleitung

Timex

Timex M097 Bedienungsanleitung

Timex

Timex SLEEK 150 Bedienungsanleitung

Timex

Timex IRONMAN Classic 50 Move+ Bedienungsanleitung

Timex

Timex Ironman SLEEK 250-LAP Bedienungsanleitung

Timex

Timex Expedition Scout Bedienungsanleitung

Timex

Timex Ironman T5K018 Bedienungsanleitung

Timex

Timex W-195 Bedienungsanleitung

Timex

Timex CR1216 Bedienungsanleitung

Timex

Timex W-152-US Bedienungsanleitung

Timex

Timex 359-095002 EU Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung

iTOUCH

iTOUCH 3360 Bedienungsanleitung