Timex IConnect Square M03Z Bedienungsanleitung

iConnect Round

M03Z

1.product details

Power button: Power on/off;awaken/turn off screen;back to main menu.

USB port: Charging.

Touch screen: Operate the function in touch screen.

2.Products quick into

Get into the main menu from dial interface by sliding the screen in any angle;

Turn the page by sliding left and right;

Get back to dial interface by sliding screen from bottom to up.

3.Products quick use

1.Bluetooth connection（HitFit）

Scan the QR code in your watch or search “HitFit”APP like below in Google play

store or Apple store, download and install it in your phone. Register the App and

complete profile.

System requirement :

Android 4.4 and above

IOS 8.0 and above(iphone5 and above).

For Android

Open APP HitFit,click “Add device” on “Me”screen to search Bluetooth devices

nearby;

Find your watch code and click to bind the device;

Allow your phone access to your location,messages,phone book and allowing

push function with HitFit.

When BT icon color like means a successful paring. click find watch/mobile

in your mobile/watch,your watch/mobile will vibrating and ringing.

For IOS

Open the Bluetooth and APP HitFit,click “Add device ” on “Me”screen to search

Bluetooth devices nearby,find watch and pair it,after connected, open the Bluetooth

in phone settings, find watches and pair it,then the phone BT menu interface will

show two Bluetooth device are connected successfully as below.

After connected successfully, the blue green double color icon will show

on smart watch.

2. Clock display

Long press the dial interface,then slide around to choose the clock interfaces

you like by clicking the screen.

3.icon introduction of status bar

: Battery capacity

:Bluetooth opening

: Watch connect successfully with mobile phone

4．Menu instruction

4.1 Dialer(BT)

Click dialer icon when want to make a phone call. BT Bluetooth call.

4.2 Setting

4.2.1 Bluetooth setting

Please note the watch can’t turn off BT in watch BT setting once connect with

mobile phone. Only to turn off on watch main menu or smart phone BT setting.

4.2.2 Clock

Setting the clock type;

Time will be synchronized after Bluetooth connection,also you can manually

set the date and time in watch setting.

4.2.3 Sound &Volume

Setting ring tone sound and volume.

4.2.4 Display

Setting screen brightness and black screen time

4.2.5 Language

For Android: Language will be synchronized with mobile phone once turn on

the automatic synchronization function.

For iPhone: Language should be manually set in watch setting tab.

4.2.7 Unit

When setting metric or imperial, the profile weight , height will also change.

4.2.8 Gesture

Mute the incoming call and clock by turn over your wrist;

Display the screen by turning over the wrist;

Answer calls by waggle your wrist twice or thrice.

4.2.10 Restore factory settings

Restoring to factory default state with all date removing.

4.2.11 About

Viewing watch Bluetooth name, device address, the Bluetooth address, and

software version .

4.3 Phone book

Sync Mobile phone book with watch,send messages and edit contact by watch.

4.4 Phone call menu

Click to mute;

Click to hang up;

Click to open the telephone dialing tab ;

Adjust the volume by sliding up and down.

4.5 Heart rate

Wear the watch, go to heart rate tab to monitor your heart rate. It is detecting

when sensor light up. It would take around 30s to get the Heart rate data.

4.6 Message

Smart phone message will sync automatically with watch once connect

successfully.（notice: iPhone not support the message synchronization);

Check the message of watch or mobile(inbox, drafts, sent messages);

Edit text, you can save it to drafts or send it by watch or Bluetooth .

4.7 Notification

Once smart phone connect with watch successfully, allow phone notification

push to watch.

4.8 Call logs

Check the call logs of watch or mobile phone and select the contact you want

to making calling.

4.9 Pedometer

The pedometer function is automatically on. The pedometer data will

automatically sync with App once watch successfully connect with phone.

4.10 Sleep

The watch will automatically monitor your sleep quality during 22:00-8:00;

You can turn on/off the monitor function,check history record by sliding from

bottom to top in sleep screen;

Sync with APP , you can check the history sleep quality date on APP.

4.11 Sedentary remind

Set the sedentary time(remind gap is between 0-300 minutes ),the watch will

vibrate and ring once come to the reminding time.

4.12 Anti- lost

After connecting with the mobile,the phone will vibrate and ring when you click

‘Start’.

4.13 Alarm

You can set the alarm types, bell times, repeat days and the alarm ring.

4.14 QR cord

Scan the QR cord to download APP in your mobile.

4.15 Calender

The screen show daily date when you open it,you can click the red icon to check

the whole month and slide the screen to check other month.

4.16 Calculator

4.17 Camera remote

After watch successfully connect with phone. Watch can open the mobile’s

camera,you can take photos by watch,photos will be saved in your mobile.(open APP

first for iPhone)

4.18 Music

After watch connect with smart phone successfully, watch can control to play

phone music .

4.19 Stop watch

Click the stop watch icon to start timing.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modiﬁcations to this device not explicitly approved by manufacturer

could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirement. The device can be used

in portable exposure condition without restriction.

ISED Statement

‐English: This device complies with Industry Canada license‐exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not cause interference, a

nd (2) This device must accept any interference, including interference that may cause undesired

operation of the device.

The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).

‐French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils

radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil

ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradi

oélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement.

l'appareil numérique du ciem conforme canadien peut ‐3 (b) / nmb ‐3 (b).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and

compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure

and compliance.

cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du

cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des

données canadiennes sur l'exposition aux champs rf et la conformité.

RF Exposure Statement

The device has been evaluated to meet general RF exposure requirement. The device can be

usedin portable exposurecondition without restriction.

L'appareil a été évalué pour répondre aux exigences générales

d'exposition aux radiofréquences. L'appareil peut être utilisé en condition d'exposition portable

sans restriction.

Andere Handbücher für iConnect Square M03Z

Inhaltsverzeichnis

Andere Timex Betrachten Handbücher

Timex

Timex 333-095002 Bedienungsanleitung

Timex

Timex Intelligent Quartz W273 Bedienungsanleitung

Timex

Timex Ironman Sleek 509-095000-02 NA Bedienungsanleitung

Timex

Timex W-99 Bedienungsanleitung

Timex

Timex W-215 Bedienungsanleitung

Timex

Timex FamilyConnect Bedienungsanleitung

Timex

Timex Helix W-62 Bedienungsanleitung

Timex

Timex W-15-US Bedienungsanleitung

Timex

Timex INTELLIGENT QUARTZ Bedienungsanleitung

Timex

Timex W-225 Bedienungsanleitung

Timex

Timex Internet messenger Bedienungsanleitung

Timex

Timex W-232 Bedienungsanleitung

Timex

Timex EXPEDITION WORLD TIME DIGITAL Bedienungsanleitung

Timex

Timex W-207 Bedienungsanleitung

Timex

Timex 814-095006 Bedienungsanleitung

Timex

Timex iConnect Square M03Z Bedienungsanleitung

Timex

Timex W263 Bedienungsanleitung

Timex

Timex iQ+ Move Bedienungsanleitung

Timex

Timex HEALTH TOUCH PLUS Bedienungsanleitung

Timex

Timex W-193 Bedienungsanleitung

Timex

Timex Expedition Bedienungsanleitung

Timex

Timex W-34-US Bedienungsanleitung

Timex

Timex W-141 Bedienungsanleitung

Timex

Timex Expedition 810-095009-NA Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung

iTOUCH

iTOUCH 3360 Bedienungsanleitung