Timitoo TEK-608A Bedienungsanleitung

Operating Instructions

TEK –608A

Broadband Modem with Ultrasonic Sensor

V1/072017

Page 2

Contents

1 Introduction............................................................................................. 3

2 Contents of Package................................................................................ 3

3 Modem User Interface ............................................................................ 4

3 Installing the Broadband Modem............................................................ 5

4 Preparing the Tank .................................................................................. 6

4 Define Tank Height.................................................................................. 6

5 Activating the Sensor.......................................................................... 7

6 Fitting the Sensor .................................................................................... 7

7 Interacting with the Modem via a Browser............................................. 8

9 Online Setup.......................................................................................... 12

10 Troubleshooting ..................................................................................12

1: No RF reading received for 6 hours..................................................12

2: MAC Address/IP link failed............................................................... 12

3: No valid IP......................................................................................... 12

4: Unable to connect to Server ............................................................13

5: Server did not respond correctly...................................................... 13

6: File download failed .........................................................................13

7: RF self-test failed.............................................................................. 13

Low Battery (indicated in online application) ......................................13

11 Specifications....................................................................................... 14

11 Warning ............................................................................................... 14

Warranty Registration..............................................................................15

Support.....................................................................................................15

Page 3

1 Introduction

The TEK-608A is a Broadband modem, allowing to connect up to 4 Ultrasonic

Tank Monitoring Sensors and transmit the data to the Timitoo Tank Monitoring

Website.

In this online application the level of the tanks can be read in a diagram, showing

the consumption over time, as well as the current level and remaining days of

supply.

The tanks can also be set up as tanks that are filling up, i.e. Waste liquid tanks.

Individual alarms can be set to notify of tanks that are becoming empty, or in

case of waste tanks, becoming full.

2 Contents of Package

Adapter Kit

Power Supply

Transmitter

Sensor

Broadband Modem

RJ45 Network

Cable

Weather Seal

Page 4

3 Modem User Interface

The TEK-608A has a simple user interface of 3 LEDs (Yellow, Green and

Red) and a momentary push button.

The table below describes the functions and a brief summary of the LED lights of

the TEK-608A broadband modem.

LED Color

Primary Function

Secondary Function

Amber

Power LED. On solid when Power is on

Green

RF Data LED. Flashes when RF data

packet is received.

During firmware download

process it will flash rapidly.

Red

Error LED

Display Erro Flash Codes:

1: No RF reading received for 6 hours

2: MAC Address/IP link failed

3: No valid IP

4: Unable to connect to Server

5: Server did not respond correctly

During boot loading process

indicates flash memory

programming.

Amber

Green

Red

Button

Power

Ethernet

Magnet

location

dot

Black

dot

Page 5

6: File download failed

7: RF self-test failed

Amber +

Green

LED’s On solid indicate unit is

attempting to connect to the server.

Amber + Green double flash

to indicate a successful

connection to the server.

Amber +

Green +

Red

All three LED’s on solid indicate the

unit is powering up. If this does not

clear, please contact support.

Indicates a sensor is being

activated (and matched if

sensor matching is enabled).

3 Installing the Broadband Modem

Please unpack the broadband modem from the packaging and screw the

antenna onto the unit, if it is not already pre-installed.

The Ethernet port (right hand of the picture) must be connected to your internet

high speed connection router. No additional bridges or routers are required. The

modem should have “line of sight”to the tank sensor transmitter and should not

exceed 250ft of distance.

Please note that the distance will decrease with obstacles such as walls or glass

between the modem and the transmitter.

The Ethernet-cable delivered is approximately 1m/3ft long, but a longer cable of

up to 100m/328ft can be used.

The left plug in the picture above is for the power supply, which is also delivered

in the packaging.

Upon correct installation and activation the green LED light in the corner of the

Ethernet plug will blink. If this light remains off, the connection to the Router is

faulty.

Page 6

4 Preparing the Tank

a. To avoid errors, the Tank Gauge Transmitter must sit in a vertical position

on top of the tank and have a direct perpendicular line of sight to the

liquid level in the tank, through the bottom ultrasonic cone, without any

interference from i.e. window configurations or tank braces.

b. Install the supplied metal adapter into the pre-drilled 2” NPT opening on

the top of the tank. Apply pipe sealant on the adapter thread and tighten

appropriately. For basement tanks, temporarily place a rag/cover over

the adapter to minimize fuel odors until transmitter is synchronized.

Tanks with 1½ and 1¼ ” NPT openings or European style double-wall

tanks require adapters (see parts sold separately). Do not use an

extension pipe when mounting the adapter; this can cause inaccurate

measurement and malfunction.

c. Installation Help:

Avoid tanks with braces, as it can reflect the ultrasound and cause

wrong readings.

4 Define Tank Height

Accurately measure the height of your tank from the liquid outlet at the bottom

of your tank to the bottom of the ultrasonic Sensor Transmitter. The sensor

measures the distance from the sensor to the level of the surface of the liquid

within the tank. Any setting for the shape of the tank, its content and the volume

of the tank are entered into the online setup of the Tank Monitoring website:

https://online.tankmonitoring.net

Page 7

5Activating the Sensor

Remove the sensor from packaging

Recycle the power on the modem and it will enter the “Learn mode”for

two minutes. Hold the black dots of the modem and the black dot on

the sensor together.

All 3 LED’s will flash while the transmitter is matching to the receiver.

Once the matching process is complete the green LED will light up for 5

seconds and will no longer be flashing.

The unit will not immediately try to connect to the server and then

revert to the listen mode.

Also consult the online video:

6 Fitting the Sensor

For tanks with pre-drilled 32mm holes:

Remove cap from pre-drilled hole and insert transmitter, ensuring the

weather seal is securely in place and that the sensor sits vertically.

Tighten onto the tank with the supplied 2 stainless steel self-tapping

screws provided. Do not use longer screws or over tighten.

For tanks with a 2”, 1½” or 1¼” BSP/NPT gauge aperture

(60mm/48mm/42mm):

Page 8

Unscrew any caps from hole; fit adapter provided by screwing into

gauge socket.

Fit Sensor to adapter on the tank; ensure weather seal is in place.

Tighten on the tank using the screws supplied. Do not over tighten.

NOTE: Mounting Adapter supplied must only be used.

7 Interacting with the Modem via a Browser

Once the TEK-608A Broadband modem has been connected to the power supply

and to the networks router, the System Dashboard page can be viewed in a

web-browser.

In order to connect to the modem use the following URL:

HTTP://TEK608-XXXX

The XXXX must be replaced with the last 4 digits of the

modems serial number.

The sample to the right would need HTTP://TEK608-1897 as hostname to be

typed into the browser.

Please note that the hostname address can only be used with a Windows-based

PC or a MAC PC. Android or Apple Tablets/Smartphones do not have a native

way of dynamically discovering the hostname. In these cases the IP-address

must be discovered from the router.

System Dashboard

Page 9

The dashboard shows the status of the connection to the internet server, as well

as which sensors that are connected. Each sensor that was matched in the

previous process shows up named “Sensor 1”to “Sensor 4”automatically.

Setup Wizard

On the Setup Wizard Page, the name of the sensor transmitter can be renamed

and a new more descriptive name can be provided. The name is stored once the

“Next”button is at the bottom of the page is selected.

Setup Wizard Stage 2

Page 10

If the transmitter sensor serial number is already known and is already active,

the number may be typed in using the “Type in sensor serial”option.

It is however more typical to use the “Activate Sensor”option.

When the “Activate Sensor”option is selected and the “Next”button is clicked,

the Broadband modem is set to the “Learn Mode”and the screen below is

shown.

A magnet needs to be held to the Transmitter Sensor (at the black dot), or the

sensor is held to the black dot of the Broadband Modem.

Follow the instructions on the screen and hold the sensor next to the broadband

modem.

If the process is not started within 2 minutes, the activation persiod will

expire and the process must be restarted.

Inhaltsverzeichnis

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung