Titan TTB804CHR Bedienungsanleitung
2
TTB804CHR
GB
EN
Let’s
get started...
These instructions are for your safety. Please read through them
thoroughly before use and retain them for future reference.
03
05
06
07
08
10
11
12
12
13
14
Getting Started... 03
In more detail... 09
Safety information
Symbols
Your product
Before you start
Intended use
Maintenance
Troubleshooting
Recycling and disposal
Guarantee
Declarations of conformity
3
TTB804CHR
Getting Started . . .
GB
EN
Safety warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
or serious injury.
Save all warnings and instructions for future
reference.
Safety information
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
charger in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
Charge only the battery pack specifically stated on this instruction
manual.
Do not charge non-rechargeable batteries.
Disconnect the charger from the power supply and allow it to cool
down before cleaning, maintenance, storage and transportation.
Before using the charger, read all the instructions and cautionary
markings on the charger and battery pack.
Charge the battery pack indoors only as the charger is designed
for indoor use only.
Protect the charger against moisture and wet conditions. There is
a danger of electric shock.
Do not place any object on top of the charger as it could cause
overheating. Do not place the charger near any heat source.
4
TTB804CHR
Getting Started . . .
GB
EN
IMPORTANT NOTE
Safety information
When the charger is in use it MUST be supervised, if there is any
evidence of overheating then IMMEDIATELY disconnect the
charger from the power supply.
If gas or smoke is emitted from the battery during charging switch
off the power supply and move to a well ventilated area.
Always disconnect battery charger and remove battery from
charger when the charging is complete.
Do not charge a damaged battery pack.
Do not use an extension cord unless it is absolutely necessary.
The use of an improper extension cord could cause the risk of
fire, electric shock or electrocution.
Do not use the charger if it has been subjected to a heavy knock,
dropped or otherwise damaged in any way. Have the charger
checked and repaired by an authorised service centre.
Charge the battery pack in an ambient temperature of 18 -
24°C (65 - 75°F) to ensure the longest battery life and best
performance. Do not charge the battery pack in temperatures
below 0°C (32°F) and above 45°C (113°F).
If the supply cord is damaged, it must be replaced by the manu-
facturer, its service agent or similarly qualified persons in order to
avoid a hazard.
During charging, the battery must be placed in a well-ventilated
area.
Be sure the supply is the same as the voltage given on the rating
plate for the charger. Remove the mains plug from socket before
carrying out any adjustment or servicing.
5
TTB804CHR
Getting Started . . .
GB
EN
Symbols
Before charging, read the instructions
Warning
For indoor use only
This is a product of class II. This means it is equipped with an insulation
reinforced or double insulation.
T 3.15A Time lag fuse with rated current of 3.15A
WEEE symbol. Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with your local
authority or local store for recycling advice.
Symbols
yyWxx Manufacturing date code; year of manufacturing (20yy) and week of
manufacturing (Wxx)
The product complies with the applicable European directives and
an evaluation method of conformity for these directives was done.
UK Conformity Assessed.
6
TTB804CHR
Getting Started . . .
GB
EN
Your product
Your product
1.
1
2
Charger
2. Power / charging status indicator lights
7
TTB804CHR
Getting Started . . .
GB
EN
: 220 - 240 V~, 50Hz, 60 W
: 21.4V 2.4 A
:/II
:Approx. 0.5 kg
TTI800BAT TTI801BAT
1.5Ah 2.0Ah
Li-Ion,5pcs Li-Ion,5pcs
50min 60min
>Rated input
>Rated output
>Protection class
>Weight
For charging 18V Li-Ion battery pack as below:
Battery pack models
Rated capacity
Battery cells
Charging time(approx.)
8
TTB804CHR
Getting Started . . .
GB
EN
Before you start
Unpacking
Setup
WALL-MOUNT HOLES
1.
2. Remove all packing materials and shipping devices if applicable.
The charger has hanging holes for convenient storage.
Install screws in the wall 2 inches (51 mm) apart (Fig. A). Use screws sufficiently
strong to hold the combined weight of the charger and battery pack.
3.
parts are missing or show damage do not use the product but contact your dealer.
Using an incomplete or damaged product represents a hazard to people and property.
WARNING! The product and the packaging are not children’s toys! Children
must not play with plastic bags, sheets and small parts! There is a danger of
choking and suffocation!
Before you start
Fig. A
51 mm
9
TTB804CHR
In more detail . . .
GB
EN
In more
detail...
Intended use
Maintenance
Troubleshooting
Recycling and disposal
Guarantee
Declarations of conformity
10
11
12
12
13
14
10
TTB804CHR
In more detail . . .
GB
EN Intended use
Intended use
This charger is solely for the charging of batteries listed in the TECHNICAL SPECIFICATION
section.
Charging the battery pack
NOTES: If the battery pack is very hot you must remove your battery pack
from the charger and allow time for the battery to cool down before recharging.
1) Insert the battery pack fully in the charger (1) (Fig. 1). Connect the charger to
the power supply. The indicator lights(2) on the charger show the battery status
as described in below table.
Fig. 1 Fig. 2
Green light Status
OFF ON
FLASHINGOFF
Charging
Battery temperature is too high
(Charging will start automatically
after cooling down).
Battery not in position/Defective battery
RED light
OFFFLASHING
OFFON Fully charged
WARNING! The charger and battery pack are specifically designed
to work together so do not attempt to use any other devices. Never insert
or allow metallic objects into your charger or battery pack connections
because an electrical failure and hazard will occur.
Inhaltsverzeichnis
Andere Titan Kamerazubehör Handbücher
