TABLE SAW
6
GB This electric tool generates an electromagnetic
field during operation. This field can impair
active or passive medical implants under
certain conditions. In order to prevent the risk
of serious or deadly injuries, we recommend
that persons with medical implants consult
with their physician and the manufacturer of
the medical implant prior to operating the
electric tool.
Take care of your tools. Keep cutting tools
sharp and clean in order to be able to work
better and more safely. Follow the instructions
for lubrication and for tool replacement.
Check the connection cable of the electric tool
regularly and have it replaced by a recognized
specialist when damaged. Check extension
cables regularly and replace them when
damaged. Keep the handle dry, clean and free
of oil and grease.
Safety Instructions for the Handling of Saw Blades
Only use insertion tools if you have mastered
their use.
Observe the maximum speed. The maximum
speed specified on the insertion tool may not
be exceeded. If specified, observe the speed
range.
Observe the motor / saw blade direction of
rotation.
Do not use any insertion tools with cracks.
Sort out cracked insertion tools. Repairs are
not permitted.
Clean grease, oil and water off of the clamping
surfaces.
Do not use any loose reducing rings or bushes
for the reducing of holes on saw blades.
Make sure that fixed reducer rings for securing
the insertion tool have the same diameter and
have at least 1/3 of the cutting diameter.
Make sure that fixed reducer rings are parallel
to each other.
Handle insertion tool with caution. They are
ideally stored in the originally package or
special containers. Wear protective gloves in
order to improve grip and to further reduce
the risk of injury.
Prior to the use of insertion tools, make
sure that all protective devices are properly
fastened.
Prior to use, make sure that the insertion
tool meets the technical requirements of this
electric tool and is properly fastened.
Only use the supplied saw blade for sawing
operations in wood, materials similar to wood,
plastics and non-ferrous metals (except for
magnesium and alloys containing magnesium).
Connect the dust extraction device if you
will be processing wood, materials similar
to wood, or plastics. If connections for dust
extraction and a collecting device are present,
make sure that they are connected and used
properly. When processing wood, materials
similar to wood, and plastics. Operation in
enclosed spaces is only permitted with the use
of a suitable extraction system.
Maintenance and Repair
Pull out the mains plug for any adjustment or
repair tasks.
The generation of noise is influenced by
various factors, including the characteristics
of saw blades, condition of saw blade and
electric tool. Use saw blades which were
designed for reduced noise development,
insofar as possible. Maintain the electric
tool and tool attachments regularly and if
necessary, initiate repairs in order to reduce
noise.
Report faults on the electric tool, protective
devices or the tool attachment to the person
responsible for safety as soon as they are
discovered.
Check the electric tool for potential damage.
Protective devices and other parts must be
care-fully inspected to ensure that they are
fault-free and function as intended prior to
continued use of the electric tool. Check
whether the moving parts function faultlessly
and do not jam or whether parts are dam-
aged. All parts must be correctly mounted and
all conditions must be fulfilled to ensure fault-
free operation of the electric tool. The moving
protective hood may not be fixed in the open
position. Damaged protective devices and
parts must be properly repaired or replaced
by a recognized workshop, insofar as nothing
different is specified in the operating manual.
Damaged switches must be replaced at a
customer service workshop. Do not use any
faulty or damaged connection cables. Do
not use any electric tool on which the switch
cannot be switched on and off.
65050UK00M100.indd 6 2020/5/27 9:36:11
