TKH Skilleye SEP-FRTMP01 Bedienungsanleitung
SEP-FRTMP01
Temperature Measurement &
Face Recognition Terminal
User Manual
Please read this instruction carefully before operating the unit and keep it for further reference
Temperature Measurement & Face Recognition Terminal User Manual
Notes on Safety
◼This product is intended to be supplied by a Listed Power Unit, marked with 'Limited
Power Source', 'LPS' on unit, output rated minimum 12V/1 A, no more than 2000m
altitude of operation and Tma=60 Deg.C.
◼Do not attempt to disassemble the camera; in order to prevent electric shock, do not
remove screws or covers.
◼There are no user-serviceable parts inside. Please contact the nearest service center as
soon as possible if there is any failure.
◼Avoid from incorrect operation, shock vibration, heavy pressing which can cause damage
to product.
◼Do not use corrosive detergent to clean main body of the camera. If necessary, please use
soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any cleanser for
high grade furniture is applicable.
◼Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this
may damage the image sensor.
◼Please follow the instructions to install the camera. Do not reverse the camera, or the
reversing image will be received.
◼Do not operate it in case temperature, humidity and power supply are beyond the limited
stipulations.
◼Keep away from heat sources such as radiators, heat registers, stove, etc.
◼Do not expose the product to the direct airflow from an air conditioner.
◼This manual is for using and managing the product. We may reserve the rights of
amending the typographical errors, inconsistencies with the latest version, software
upgrades and product improvements, interpretation and modification. These changes will
be published in the latest version without special notification.
◼All pictures, charts, images in this manual are only for description and explanation of our
products. The ownerships of trademarks, logos and other intellectual properties related to
Microsoft, Apple and Google belong to the above-mentioned companies.
◼This manual is suitable for face recognition network cameras.
Temperature Measurement & Face Recognition Terminal User Manual
Disclaimer
◼With regard to the product with internet access, the use of product shall be wholly at your
own risks. Our company shall be irresponsible for abnormal operation, privacy leakage
or other damages resulting from cyber attack, hacker attack, virus inspection, or other
internet security risks; however, our company will provide timely technical support if
necessary.
◼Surveillance laws vary from country to country. Check all laws in your local region before
using this product for surveillance purposes. We shall not take the responsibility for any
consequences resulting from illegal operations.
Regulatory Information
FCC Information
1.FCC compliance
The products have be tested and found in compliance with the council FCC rules and
regulations part 15 subpart B. These limits are designed to provide reasonable protection
against harmful interference. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communication. However, there is no guarantee
that interference will not occur in a particular installation. The user will be required to
correct the interface at his own expense in case the harmful interference occurs.
2. FCC conditions:
Operation of this product is subject the following two conditions: (1) this device may not
cause harmful interface, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CE Information
The products have been manufactured to comply with the following directives.
EMC Directive 2014/30/EU
RoHS
The products have designed and manufactured in accordance with Directive EU RoHS
Directive 2011/65/EU and its amendment Directive EU 2015/863 on the restriction of the
use of certain hazardous substances in electrical and electronic equipment.
Temperature Measurement & Face Recognition Terminal User Manual
2012/19/EU (WEEE directive): The Directive on waste electrical and electronic
equipment (WEEE Directive). To improve the environmental management of
WEEE, the improvement of collection, treatment and recycling of electronics at
the end of their life is essential. Therefore, the product marked with this symbol
must be disposed of in a responsible manner.
Directive 94/62/EC: The Directive aims at the management of packaging and packaging waste
and environmental protection. The packaging and packaging waste of the product in this manual
refers to must be disposed of at designated collection points for proper recycling and
environmental protection.
REACH(EC1907/2006): REACH concerns the Registration, Evaluation, Authorization and
Restriction of Chemicals, which aims to ensure a high level of protection of human health and
the environment through better and earlier identification of the intrinsic properties of chemical
substances. The product in this manual refers to conforms to the rules and regulations of
REACH. For more information of REACH, please refer to DG GROWTH or ECHA websites.
Temperature Measurement & Face Recognition Terminal User Manual
Table of Contents
1Introduction.......................................................................................................................1
2Network Connection .........................................................................................................2
1.1 LAN ..........................................................................................................................2
1.1.1 Access through IP-Tool .....................................................................................2
1.1.2 Directly Access through IE................................................................................4
1.2 WAN .........................................................................................................................5
3Temp Measurement & FR Config .....................................................................................9
3.1 Temperature Measurement Settings ..............................................................................9
3.2 Face Match Configuration ..........................................................................................10
3.3 Face Database Management .......................................................................................11
3.4 Mask Detection...........................................................................................................12
4Live View........................................................................................................................14
4.1 Temperature Measurement & Face Recognition View................................................14
4.1.1 Temperature Measurement Requirements ..............................................................14
4.1.2 Temperature Measurement & Face Recognition View ...........................................15
4.2 Live View via Web......................................................................................................16
5Access Control Settings ..................................................................................................19
5.1 Door Lock Settings .....................................................................................................19
5.2 Wiegand Settings ........................................................................................................19
5.3 Tampering Alarm Settings ..........................................................................................20
6Other Configurations.......................................................................................................21
6.1 System Settings...........................................................................................................21
6.1.1 Basic Information...................................................................................................21
6.1.2 Date and Time........................................................................................................21
6.1.3 Local Config ..........................................................................................................22
6.1.4 Storage ...................................................................................................................22
6.2 Image Configuration ...................................................................................................25
6.2.1 Display Configuration............................................................................................25
6.2.2 Video / Audio Configuration..................................................................................27
6.2.3 OSD Configuration ................................................................................................28
6.2.4 Screen Brightness...................................................................................................29
6.2.5 White Light Control ...............................................................................................30
6.2.6 Face Exposure ........................................................................................................30
6.3 Alarm Configuration ...................................................................................................30
6.3.1 Exception ...............................................................................................................30
6.3.2 SD Card Full ..........................................................................................................32
6.3.3 SD Card Error ........................................................................................................32
6.3.4 IP Address Conflict ................................................................................................33
Temperature Measurement & Face Recognition Terminal User Manual
6.3.5 Cable Disconnection ..............................................................................................33
6.3.6 Alarm In .................................................................................................................33
6.3.7 Alarm Out...............................................................................................................34
6.4 Network Configuration ...............................................................................................35
6.4.1 TCP/IP....................................................................................................................35
6.4.2 Port.........................................................................................................................37
6.4.3 Server Configuration..............................................................................................37
6.4.4 DDNS.....................................................................................................................37
6.4.5 RTSP ......................................................................................................................39
6.4.6 UPnP ......................................................................................................................40
6.4.7 Email......................................................................................................................40
6.4.8 FTP.........................................................................................................................41
6.4.9 HTTPS ...................................................................................................................41
6.4.10 P2P (Optional)......................................................................................................43
6.5 Security Configuration................................................................................................43
6.5.1 User Configuration.................................................................................................43
6.5.2 Online User ............................................................................................................45
6.5.3 Block and Allow Lists............................................................................................45
6.5.4 Security Management.............................................................................................45
6.6 Maintenance Configuration ........................................................................................46
6.6.1 Backup and Restore................................................................................................46
6.6.2 Reboot....................................................................................................................47
6.6.3 Upgrade..................................................................................................................47
6.6.4 Operation Log ........................................................................................................48
7Search .............................................................................................................................49
7.1 Image Search ..............................................................................................................49
7.2 Video Search...............................................................................................................51
7.2.1 Local Video Search ................................................................................................51
7.2.2 SD Card Video Search............................................................................................52
8Face Match Result Search...............................................................................................55
Appendix.................................................................................................................................56
Appendix 1 Troubleshooting................................................................................................56
Appendix 2 Specifications ...................................................................................................58
1
Temperature Measurement & Face Recognition Terminal User Manual
1Introduction
This series of product is specially designed and developed for face recognition and temperature
measurement applications, featuring non-contract temperature measurement, high performance
and reliability, faster recognition and higher accuracy rate. Based on deep-learning algorithm,
it combines temperature measurement, identity authorization and access control.
It can be widely used in the entrances and exits of community, schools, hospitals, scenic areas,
hotels, shopping malls, office buildings, public services and construction sites for body
temperature measurement, identity authorization and access control.
Main Features
⚫8 inch LCD screen
⚫High-accuracy IR body temperature measurement
⚫Non-contact body temperature measurement
⚫Human-sounding voice prompt
⚫Real-time face mask detection
⚫Face liveness detection technology distinguishing real faces from non-real face spoof
attacks
⚫Highly accurate face recognition using deep learning algorithm
⚫Stand-alone device, ready for networking
2
Temperature Measurement & Face Recognition Terminal User Manual
2Network Connection
Connect IP-Cam via LAN or WAN. Here only take IE browser for example. The details are as
follows:
1.1 LAN
In LAN, there are two ways to access IP-Cam: 1. access through IP-Tool; 2. directly access
through IE browser.
1.1.1 Access through IP-Tool
Network connection:
① Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the
PC from the CD.
② Double click the IP-Tool icon on the desktop to run this software as shown below:
③ Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the
information of the camera listed in the above table to show the network information on the right
hand. Modify the IP address and gateway of the camera and make sure its network address is
in the same local network segment as the computer’s. Please modify the IP address of your
3
Temperature Measurement & Face Recognition Terminal User Manual
device according to the practical situation.
For example, the IP address of your computer is 192.168.1.4. So the IP address of the camera
shall be changed to 192.168.1.X. After modification, please enter the password of the
administrator and click the “Modify” button to modify the setting.
④ Double click the IP address and then the system will pop up the IE browser to connect IP-
CAM. Follow directions to download, install and run the Active X control.
Enter the username and password in the login window to log in.
The default password of the administrator is “123456”.
The default username is “admin”; the default password is “123456”.
4
Temperature Measurement & Face Recognition Terminal User Manual
The system will pop up the above-mentioned textbox to ask you to change the default password.
It is strongly recommended to change the default password for account security. If “Do not
show again” is checked, the textbox will not appear next time.
1.1.2 Directly Access through IE
The default network settings are as shown below:
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
HTTP: 80
Data port: 9008
Use the above default settings when logging in the camera for the first time. Directly connect
the camera to the computer through network cable.
① Manually set the IP address of the PC and the network segment should be as the same as the
default settings of the IP camera. Open the network and share center. Click “Local Area
Connection” to pop up the following window.
Inhaltsverzeichnis
Andere TKH Touch-Terminal Handbücher
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung