How to adjust your Torque Screwdriver
To check setting:
Use a Torque Analyser.
To adjust the torque setting:
Use a 5 mm hexagon key to remove the end cap
Fitted to Pro and ESD models, in an anti-clockwise
Direction. Also remove the T-bar where fitted.
To increase the torque:
Use a 2.5mm hexagon key to loosen the adjuster
locking screw by ½ a turn. Insert the
5mm hexagon key into the adjuster and turn PRIME
Clockwise. Tighten the locking screw to 1.5N.m
Using the 2.5mm hexagonal key once required
torque value is reached. PRO
To reduce the torque:
Use a 2.5mm hexagon key to loosen the adjuster
locking screw by ½ a turn.
Insert the 5mm hexagon key into the adjuster
and turn anti-clockwise below the required setting,
then turn clockwise to approach the new value.
Tighten the locking screw to 1.5N.m using the 2.5mm
hexagonal key once required torque value is reached.
Take 10 consistent readings on the Analyser to
confirm the torque setting.
To use Torque Screwdriver:
The Pro, ESD and Prime Screwdrivers are designed
for use with sockets, screwdriver bits and blades
.
Servicing Information
Regular servicing of your Torque Tool by competent personnel is important to
ensure it continues to perform correctly.
