TMB ProPlex IQ Two 88 2x Bedienungsanleitung
ProPlex IQ Two 88 User Manual v1.1—18 February 2021 2
ProPlex IQ Two 88 2x User Manual
v1.1
Effective 18 February 2021
© Copyright 2021, TMB
All rights reserved
TMB authorizes its customers to download and print
this electronically published manual for professional
use only. TMB prohibits reproduction, modification or
distribution of this document for any other purposes,
without express written consent.
Specifications are subject to change without notice.
The information in this document supersedes all
previously supplied information before the effective
date listed above. TMB has confidence in the accuracy
of the document information herein but assumes no
responsibility or liability for any loss occurring as a
direct or indirect result of errors or exclusions whether
by accident or any other cause.
ProPlex IQ Two 88 User Manual v1.1—18 February 2021 3
SPECIFICATIONS
DIMENSIONS
Inches and [mm]
Power
100-240 VAC 50-60 Hz
Power Consumption
10.2 A
Fuse
1.0A 250V
Ethernet Ports
2
DMX Ports
8
DMX Connectors
Neutrik XLR5 Female (NC5FAV)
DMX Port Isolation
Optical, up to 1000V
Ethernet Connectors
Neutrik EtherCon RJ45
Ethernet Type
1 Gbps
Network Protocols
ArtNet, sACN (E1.31)
Cooling
Convection
Operating Temperature
-20º to +40º C
Width
19.0 in / 482.6 mm
Depth
8.38 in / 212.8 mm
Height
1.72 in / 43.7
Weight
6.83 lbs 3.1 kg
ProPlex IQ Two 88 User Manual v1.1—18 February 2021 4
OVERVIEW
NOTE! Ethernet port 1 supports PoE Input
LED STATUS INFORMATION
ProPlex IQ Two 88 User Manual v1.1—18 February 2021 5
CONFIGURATION
IQ Two can be configured locally on the device by using control panel buttons, or remotely through
the Ethernet ports by accessing a built-in web page with web browser, or with ProPlex Software.
Access Main menu functions using the navigation pad next to the LCD display.
While in home screen: Press any of the directional buttons to activate the selection window marked
green and choose CONFIG menu or any of eight ports for configuration.
At the bottom of the home screen are two indicators. ETH1 and ETH2
indicate the status of the two Ethernet ports located at the back of
the unit.
RED: None of the ports are connected or active.
GREY: Port is inactive
GREEN: The port is connected and active (1Gbps)
ORANGE: The port is connected and active (10/100 Mbps)
ProPlex IQ Two 88 User Manual v1.1—18 February 2021 6
MENU TREE
ProPlex IQ Two 88 User Manual v1.1—18 February 2021 7
PORT SETUP
Press any of the directional buttons on the home screen to activate
selection window marked green.
Press <SELECT> to access the desired menu.
Use <UP> and <DOWN> buttons to scroll through the menus.
<LEFT> menu button can be used as secondary <BACK> button and
<RIGHT> button can be used for navigation or as a secondary
<SELECT> button.
IN: Port is configured as DMX Input
Green bar indicates the amount of data being received
R -: RDM function has been enabled
PORT SETUP
Press <SELECT> or <RIGHT> to enter the Port submenu or <LEFT> to
return to the home screen. Select any of eight ports to set the desired
values.
ProPlex IQ Two 88 User Manual v1.1—18 February 2021 8
UNIVERSE SET
Press <SELECT> button to access the Universe submenu.
Press <UP> or <DOWN> to set the universe.
Press <LEFT> or <RIGHT> to decline or confirm, <SELECT> to accept.
DIRECTION
Press <SELECT> to access the DMX Direction submenu.
Press <UP> or <DOWN> to assign the port direction (OUT/ IN) for each DMX port.
Press <SELECT> or <RIGHT> to accept, <LEFT> to decline changes.
RDM
Press <SELECT> to access the RDM submenu.
Press <UP> or <DOWN> to enable or disable RDM function.
Press <SELECT> or <RIGHT> to accept, <LEFT> to decline changes.
ProPlex IQ Two 88 User Manual v1.1—18 February 2021 9
PRIORITY
Press <SELECT> to access the Priority submenu.
Press <UP> or <DOWN> to set desired priority number (0-200).
Press <LEFT> or <RIGHT> to decline or confirm, <SELECT> to accept.
When signal is lost for the highest priority port, the DMX signal will be taken from the port with the
next highest priority.
PROTOCOL SETUP
While in the home screen, press any of directional buttons to activate selection window.
Navigate selection window to CONFIG and press <SELECT> to access CONFIG submenu.
Press <SELECT> or <RIGHT> to enter the Protocol Setup submenu or <LEFT> to return to the home
screen.
PROTOCOL
Press <DOWN> or <UP> to choose between ArtNet or sACN lightning
protocols.
Press <SELECT> or <RIGHT> to set or <LEFT> to decline.
Press <LEFT> to return to the home screen.
ProPlex IQ Two 88 User Manual v1.1—18 February 2021 10
EASY PRIORITY
Press <DOWN> or <UP> buttons to turn the Easy Priority ON or OFF.
Press <SELECT> or <RIGHT> to set or <LEFT> to decline.
Press <LEFT> to return to the home screen.
When two or more of the same universes are entering the node, the
console with the higher channel 512 value will have control over the
universe is Easy Priority is turned ON.
SOURCE LOSS ACTION
Press <DOWN> or <UP> buttons to choose what happens if the source
is lost.
Press <SELECT> or <RIGHT> to set or <LEFT> to decline.
Press <LEFT> to return to the home screen.
When the "Hold values" (DEFAULT) setting is chosen, after the source
DMX is lost, the ProPlex IQ Two 88 2x holds the last DMX values it has
received and continues to output these values until incoming DMX has
been restored.
When the "Blackout" setting is chosen, after the source DMX is lost, all DMX values will
change to 0 and be held at this value until incoming DMX is restored.
SOURCE LOSS TIMEOUT
Press <UP> or <DOWN> to set Source loss timeout (5-120s)
Press <LEFT> or <RIGHT> to decline or confirm, <SELECT> to accept.
This setting determines how long the IQ Two 2x will wait before
using the Source Loss setting. This time is set in seconds (5-
120). Once the source loss timeout time has been reached, the
IQ Two will revert to the Source Loss timeout setting.
Inhaltsverzeichnis
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
