TMB PROPLEX GBS 10-PORT Bedienungsanleitung
GBS 10-Port Gigabit Switch
USER MANUAL
TMB 24/7 Technical Support
US/Canada: +1 818.794.1286
Toll Free: 1 877.862.3833 (877.TMB.DUDE)
UK: +44 (0)20.8574.9739
Toll Free: 0800.652.5418
e-mail: tec[email protected]
TABLE OF CONTENTS
1. INTRODUCTION ..................................................................................................................3
PRODUCT OVERVIEW.......................................................................................................................................3
MORE ABOUT PROPLEX GBS 10-PORT ...........................................................................................................3
UNPACKING INSTRUCTIONS..............................................................................................................................4
POWER REQUIREMENTS ..................................................................................................................................4
SAFETY INSTRUCTIONS....................................................................................................................................4
FUSE REPLACEMENT.......................................................................................................................................5
WIRING........................................................................................................................................................... 5
PANEL FRONT/BACK........................................................................................................................................5
LED STATUS................................................................................................................................................... 6
2. CONFIGURATION................................................................................................................7
DATA PORT MODULE DISASSEMBLY .................................................................................................................7
CONNECTORS ............................................................................................................................................... 10
MIXED MEDIA PORTS.....................................................................................................................................11
DATA PORT MODULE ASSEMBLY....................................................................................................................12
FIBER OPTIC PORT INSTALLATION ..................................................................................................................15
3. APPENDIX .......................................................................................................................17
LIMITED WARRANTY ......................................................................................................................................17
RETURN PROCEDURE....................................................................................................................................17
TECHNICAL SPECIFICATIONS..........................................................................................................................18
GBS 10-port user manual version 1.2090618
- 3 -
INTRODUCTION
PRODUCT OVERVIEW
ProPlex GBS Gigabit Ethernet switches are designed for portable entertainment production amd are part of
the ProPlex Data Distribution range of products for complete touring show data management. Just a few
features include:
•Reconfigurable! Any combination of data port modules can be moved between front and rear panels
for practical gig-specific wiring.
•Built for extreme conditions. Shock-mounted circuitry. Advanced thermal management.
•Fibre option via one or two heavy-duty OpticalCON QUAD connectors. OpticalCON DUO also
available by special order.
•Gigabit Ethernet: 10 ports with tour-grade EtherCON connectors. Up to 10 tour-grade EtherCON
connectors or up to 8 EtherCON ports with optional fibre connectivity via 1 or 2 heavy-duty
OpticalCON QUAD connectors.
•PoE and non-PoE versions available
•Compatible with a wide range of entertainment-specific protocols, including sACN, ArtNet,
CobraNet, Dante, ETCNet, Ethersound, MA-Net, and more!
•Variable power input, 90-260 VAC, 50-60 Hz with PowerCON connector
•ProPlex “Blue Box” RackMount, rugged tour-ready enclosure
The rugged ProPlex GBS 10-port is suitable for high-volume, multicast, video, audio, or lighting data
streaming with forwarding rate of 14.88 million Packets per Second (64-byte packets) and Switching
Capacity of 20.0 Gigabits per Second. ProPlex GBS supports:
•4,096 simultaneous VLANs, port-based and 802.1Q tag-based VLANs and MAC-based VLAN
•Internet Group Management Protocol with the ability to limit bandwidth-intensive multicast traffic
•IGMP Querier support to forward multicast traffic
•802.1d Spanning Tree support
•Fast convergence 802.1w support
•Native IPv6 Internet Protocol support with option to deliver IPv6 multicast packets only to the
required receivers
•Previous version support for IPv4 routing with up to 512 static routes and up to 128 IP interfaces
•Built-in browser-based switch configuration utility
GBS RackMount and DIN Rail models are available with PoE functionality, enabled by default on
ports 1- 8 (PoE+ ports with 124W power budget and 10/100/1000 max.) Ports 9 and 10 does not
support PoE functionality. PoE technology enables Ethernet network cables to function as power
cords. In a PoE enabled network, electrical current flows over CAT5 or higher network data cable
together with normal Ethernet data traffic. No extra AC power cord is needed at the product location,
minimizing the amount of cables needed and/or the inconvenience of installing extra outlets
Note: For Managed Mode access, contact TMB Tech Support
GBS 10-port user manual version 1.2090618
- 4 -
UNPACKING INSTRUCTIONS
Upon receipt of the unit, carefully unpack the carton and check the contents to ensure that all parts are
present and in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear to be damaged from shipping or if the carton itself shows signs of mishandling. Save the
carton and all packing materials. In the event that a unit must be returned to the factory, it is important that it
be returned in the original factory box and packing.
POWER REQUIREMENTS
Before powering the unit, make sure the line voltage is within the range of accepted voltages. This unit
accommodates 90-260 VAC, 50/60Hz. All units must be powered directly from a switched circuit and cannot
be operated with a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is
used solely for a 0-100% switch.
SAFETY INSTRUCTIONS
•Keep this User Guide for future reference. If unit is sold to another user, make sure they also receive
this instruction booklet.
•Ensure the unit is connected to proper voltage, and that line voltage is not higher than that stated on the
device.
•Make sure there are no flammable materials close to the unit while operating.
•Always disconnect from the power source before servicing or fuse replacement. Always use the fuse
specified in this manual..
•Always use a safety cable when hanging unit overhead.
•Maximum ambient temperature (Ta) is 40°C (104°F). Do not operate unit at temperatures above this
rating.
•In the event of a serious operating problem, stop using the unit immediately. Repairs must be carried
out by trained, authroized personnel. Conact the nearest authorized technical assistance center. Only
OEM spare parts should be used.
•Do not connect the device to a dimmer pack.
•Make sure power cord is never crimped or damaged.
•Never disconnect power cord by pulling or tugging on the cord.
Please read these instructions carefully. This user guide
contains important information about the installation, usage
and maintenance of this product.
GBS 10-port user manual version 1.2090618
- 5 -
FUSE REPLACEMENT
The GBS 10-port RackMount uses a 1.5A, 250V barrel fuse, 5x20mm (0.2x0.8 in.).
To replace fuse:
1. With a screwdriver, turn the fuse cap counter-clockwise to remove fuse cap with fuse.
2. Replace fuse attached to fuse cap.
3. Reinsert fuse cap with new fuse and tighten clockwise.
WIRING
Connect the 90-260 VAC (50- 60 Hz) power to the power input (PowerCON) at the back of the unit.
PANELS –FRONT /BACK
GBS 10-port user manual version 1.2090618
- 6 -
LED STATUS
The Power LED has two states: ON and OFF
•ON: Unit is receiving power
•OFF: Unit is not receiving power
The Link Connection LED has two states:
•Glowing green: There is a link connection
•OFF: There is no link connection
The Link Activity LED has two states:
•Blinking yellow: There is activity on the link
•OFF: There is no activity on the link
GBS 10-port user manual version 1.2090618
- 7 -
CONFIGURATION
DATA PORT MODULE DISASSEMBLY
To meet specific wiring needs of any entertainment application, it is possible to move data port modules
between the front and rear of the unit in any combination, giving more freedom when creating a multicast
network.
1. Using a Phillips #2 screwdriver, remove all 12 screws from the unit’s case lid.
2. Once the lid is removed, the grounding cable can be undone with 9/32-inch (7mm) wrench. (This step is
not obligatory as it is possible to work on the GBS switch without disconnecting the grounding cable.)
Step 2
Step 1
GBS 10-port user manual version 1.2090618
- 8 -
3. To unscrew a port housing, two Philips screws must be undone. One on the top, the other on the bottom
side of the ProPlex GBS switch. Remove the screws from ports which you want to swap places. Take
out the blank port housing and set it aside
4. The desired connector housing can be released from its mounting.
5. Unfasten twist-locks and cable management clips that can be undone and refastened by hand.
Step 3
Step 4
Step 5
GBS 10-port user manual version 1.2090618
- 9 -
6 When the clips are unfastened, the connector can be disconnected from the port. To do so, push down
on the RJ-45 connector clip and slide it out. To disconnect the 3-pin LED connector, pull firmly with
your fingertips on both sides until the connector slides out.
7. Once the tail is disconnected from the main switch, slide it out of the unit.
Step 6
Step 7
GBS 10-port user manual version 1.2090618
- 10 -
CONNECTORS
Each port panel is fed by a 3-pin LED connector, indicating network activity, as well as a CAT5e RJ45 or
fibre jumper that connects to the EtherCon or OpticalCon QUAD connector on that panel. These cables are
bundled together inside a TechFlex®sleeve.
Inhaltsverzeichnis
Andere TMB Schalten Handbücher
