
Chapter 1 Introduction
4 CITSP/PV/PE User’s Manual
• Sound:
AC’97 compliant audio CODEC for controller Interface for
Connector to ICH2
• BIOS: Award BIOS, PnP support
• FLASH EEPROM (4MB) for BIOS update
• Power management
• DMI BIOS Support:
Desktop Management Interface (DMI) allows users to download
system hardware-level information such as CPU type, CPU speed,
internal/external frequencies and memory size.
• Multi I/O: Winbond W83627 HF
• CompactFlash socket: Onboard CompactFlash Socket (Type I/ II)
• Parallel Port: One high-speed parallel port, SPP/EPP/ECP mode
• Serial Port: Two 16550 UART compatible ports configurable COM1
as RS-232; COM2 as RS-232/ RS-422/ RS-485
• Enhanced IDE: Two Bus Mastering EIDE mode, up to 4 devices, Two
EIDE interfaces for up to four devices, support PIO Mode 0~3 or Ultra
DMA 33/66/100 IDE Hard Disk and ATAPI CD-ROM. (LS-120)
• FDD Interface: Two floppy drives (360KB, 720KB, 1.2MB, 1.44MB,
2.88MB)
• CRT/LCD: C&T 69000/69030 chipset
• Embedded 2MB/4MB SDRAM display memory
• Simultaneous CRT & LCD display
• LCD panel supports DSTN/TFT
• 1280x 1024x 8bpp colors CRT resolution
• Up to 1280x 1024x 8bpp colors resolution for color active matrix
TFT panels (18, 24bit analog), (18+18) double pixel/CLK
interface
• USB Interface: Four 1.1 USB pin-header connectors.
• Watchdog Timer: 256sec level, programmable
• Green Function: Power management via BIOS, activated through
mouse/keyboard movement