TMG TMG-GH813 Bedienungsanleitung
►www.tmgindustrial.com 0/16 Toll Free:1-877-761-2819
►www.tmgindustrial.com 1/16 Toll Free:1-877-761-2819
MAIN SPECIFICATIONS :
Overall assembled size : W2.4 x L4 x H2.3 (m) / 7.87 x 13.12 x 7.54 (ft)
Shoulder height : 1.5 m / 5.18 ft
Ridge peak height : 2.3m / 7.54 ft
The front and back doors : 1.1 x 1.8 (m) / 3.6 x 5.9 (ft)
PRIOR TO ASSEMBLY
Please read the instructions carefully before installation. It is important to follow your local safety regulations and
industry standards during installation. Regulations may include but are not limited to :
Safety helmets, protective eyewear, and clothing.
Safety harnesses for all elevated workers.
Proper ladder, cage, and safety operation.
Check all components and parts before installation. All parts are marked with a part number, please refer to the
parts list to make sure you have all parts.
Choose a day with low or no wind to install, assembly is hard in heavy wind. Do not make any alterations to the
structure. Do not hang any weights on the frame during installation, including parts. We are not responsible for any
damages or injuries caused by inappropriate installation, unauthorized modifications or extreme weather.
This building is not intended for human occupancy.
It is recommended to tape or add foam/rubber on the frame where joints connect and where it touches the cover.
This will help extend the life span of the cover.
►www.tmgindustrial.com 2/16 Toll Free:1-877-761-2819
TMG-GH813 PART LIST
PARTS
CODE
GRAPHICAL
DESCRIPTION
LENGTH
QTY
1
Truss upper eave beam
pipe
L1398mm
6
1A
Front and rear door truss
upper eave beam pipe
L1398mm
4
2
Lower straight pipe of
middle truss
L1555mm
6
2A
Lower straight pipe of
front and rear doors
L1555mm
4
3
Anchor connection pipe
L1012mm
4
3A
Anchor connection pipe
L996mm
4
4
Cross pull tube assembly
L970mm
12
4A
Front and rear door pillar
support pipe
L1864mm
4
5
Horizontal pull pipe on
front and rear doors
L1130mm
2
6
Front and rear door side
cross pull pipe
L610mm
4
7
Anchor connecting pipe of
front and rear doors
L604mm
4
8
Anchor connecting pipe of
front and rear doors
L1158mm
2
9
Door frame column pipe
L1750mm
8
10
Door frame cross pull pipe
L490mm
12
11
T-shaped connecting plate
L122mm
20
12
Arc connecting plate
L120mm
6
13
L-shaped connecting plate
L90mm
4
►www.tmgindustrial.com 3/16 Toll Free:1-877-761-2819
13A
Triangular fixing plate
L150mm
16
14
Riding clip
L134mm
18
15
Expansion bolt
φ8x100mm
36
16
Mushroom head hexagon
socket bolt
M6x45mm
180
16A
Inner hexagon spanner
4mm
3
17
Hex Bolt
M10x30mm
4
18
Compression strip
L2000mm
46
19
Scratch resistant tape
10m
1
20
Cross round head drill tail
tapping screw
M5x15mm
994
21
Hinge
8
22
Door latch
L145mm
8
22A
Door handle
L150mm
4
23
Limit lever
L1216mm
2
23A
Connecting plate
L122mm
2
24
Front and rear baffle cloth
W2550xL2960mm
2
25
Roof cloth
W4420xL6400mm
1
►www.tmgindustrial.com 4/16 Toll Free:1-877-761-2819
INSTALLATION STEPS
STEP 1 : FOUNDATION PIPE INSTALLATION.
Installation diagram of expansion bolt.
NO.
PART
QTY
NO.
PART
QTY
3
4
13
4
3A
4
14
18
7
4
15
36
8
2
16
48
11
20
►www.tmgindustrial.com 5/16 Toll Free:1-877-761-2819
STEP 2 : INSTALL THE LOWER STRAIGHT PIPE.
In this step, do not tighten the screws, and then tighten them when positioning later!
NO.
PART
QTY
2
6
2A
4
16
20
►www.tmgindustrial.com 6/16 Toll Free:1-877-761-2819
STEP 3 : INSTALL THE UPPER EAVE BEAM PIPE (#1、#1A) AND CROSS PULL PIPE OF TRUSS(#4).
In this step, do not tighten the screws, and then tighten them when positioning later!
NO.
PART
QTY
NO.
PART
QTY
1
6
12
6
1A
4
16
60
4
12
►www.tmgindustrial.com 7/16 Toll Free:1-877-761-2819
STEP 4 : ASSEMBLE THE LIMIT BAR(#23), AND USE THE LIMIT BAR TO FIX THE TRUSS POSITION AND
TIGHTEN THE BOLTS.
Assemble the limit rod (#23) with connecting plate (#23A) and self-tapping screw (#20).
Fix the truss position with the limit bar (#23) in sequence from one to five and tighten the bolts.
NO.
PART
QTY
20
8
23
2
23A
2
►www.tmgindustrial.com 8/16 Toll Free:1-877-761-2819
STEP 5 : WRAP (#19) AROUND THE SHARP POINTS OF THE JOINT TO AVOID FRICTION BETWEEN THE FABRIC
AND THE INTERFACE.
NO.
PART
QTY
19
1
►www.tmgindustrial.com 9/16 Toll Free:1-877-761-2819
STEP 6 : INSTALL THE FRONT AND REAR TRUSSES.
NO.
PART
QTY
NO.
PART
QTY
4A
2x2
16
14x2
5
1x2
17
2x2
6
2x2
Inhaltsverzeichnis
Andere TMG Gewächshaus-Bausatz Handbücher
TMG
TMG TMG-GH2060 Bedienungsanleitung
TMG
TMG INDUSTRIAL 25100 Bedienungsanleitung
TMG
TMG TMG-GH1020P Bedienungsanleitung
TMG
TMG TMG-GH1010R Bedienungsanleitung
TMG
TMG TMG-GH1030R Bedienungsanleitung
TMG
TMG TMG-GH1020R Bedienungsanleitung
TMG
TMG TMG-GHD3060 Bedienungsanleitung
TMG
TMG TMG-GH826 Bedienungsanleitung
TMG
TMG TMG-GH2030BL Bedienungsanleitung
TMG
TMG 1260 Bedienungsanleitung
Beliebte Gewächshaus-Bausatz Handbücher anderer Marken
ACD PRESTIGE
ACD PRESTIGE MR3 H Bedienungsanleitung
Vitavia
Vitavia VA0040-TRP Bedienungsanleitung
VegTrug
VegTrug Nursery Bedienungsanleitung
Riverstone Networks
Riverstone Networks Monticello 041315V Bedienungsanleitung
STC
STC Easy Grow 6x12 Greenhouse Bedienungsanleitung
CLIMA POD
CLIMA POD Spirit V7 Series Bedienungsanleitung
