Toa AM-1 Bedienungsanleitung

QUICK SETUP GUIDE

AM-1 Setup Guide for the

Polycom® Video Co fere ci g Systems

*POLYCOM

and the names and marks associated with Polycom's products are trademarks and/or service marks

of Polycom, nc., and are registered and/or common law marks in the United States and various other countries.

TABLE OF CONTENTS

1. ABOUT THIS SETUP GUIDE ............................................................ 3

3. SETUP WITH “Group 500” ............................................................... 4

4. SETUP WITH “Group 700” ............................................................... 5

5. SETUP WITH “HDX 7000” ................................................................ 6

6. SETUP WITH “HDX 8000” ................................................................ 7

7. SETUP WITH “HDX 9000 Series” .................................................... 8

8. SPECIFICATIONS OF AM-1 ........................................................... 10

1. ABOUT THIS SETUP GUIDE

This setup guide shows how to use TOA’s AM-1 Real-time Steering Array Microphone System with the

Polycom® Video Conferencing Systems for better performance. The applicable models from Polycom®

are;

Polycom® RealPresence® Group Series (Group 500/700)

Polycom® HDX® Systems (HDX 9006/9004/9002/9001/7000)

*Group 300/550 and HDX 4000/6000 are not recommended to use with the AM-1, because the echo

canceling feature is not available for external microphone input.

For more detailed settings for AM-1, please refer AM-1’s Operating nstructions.

2. GENERAL INFORMATION OF AM-1

The AM-1 Real-time Steering Array Microphone System is a sophisticated microphone system, capable

of detecting a sound source location, and steering the microphone’s beam angle automatically in real-

time to capture the targeted sound more efficiently. n addition, the unique user-friendly app allows the

user to monitor the status of the sound source, and make changes to its detailed setting parameters by

using an iPad™.

Key Features

 The microphone unit is equipped with 8 microphone elements able to achieve the line array effect

with a narrow horizontal dispersion angle of 50 degrees.

 The unit is able to detect a sound source location and steer the microphone’s beam angle

automatically in real-time to focus on the targeted sound source.

 The dedicated user-friendly GU is available for use with an iPad™, which allows monitoring of

the sound source tracking status and setting of detail parameters. t is also possible to change

parameter settings via a browser, when using a PC.

 The unit has a simple mute function with a physical mute switch on the microphone unit or

through the GU . The mute switch function of the microphone unit can be disabled through a GU

setting.

 t is equipped with two outputs: adjustable analog audio output level, and AES/EBU digital audio

output.

3. SETUP WITH “Group 500”

CONNECTIONS

SETTINGS

Step1. Confirm all devices are connected properly as shown above.

Step2. Make sure that the audio output level of the AM-1 Control Unit is set to “-10dBv” and the volume

control is set to “0”.

Step3. n the web interface of Group 500, go to Admi Setti gs > Audio/Video > Audio >Audio I put.

Step4. Enable Use 3.5 mm I put for Micropho e.

Step5. Enable Echo Ca celler.

Step6. Adjust the 3.5 mm Level if necessary.

Step7. While speaking to the microphone from an appropriate distance, adjust the output level with the

volume control. The Audio Meter on Group 500 should peak at about 5 dB for normal speech.

Group 500

AM-1 Micropho e U it

Co trol U it

XLR(3P-Female) to 3.5mm Cable

Audio I put1 (3.5mm)

1: Ground

2: Hot

3: Cold

*When the Audio nput 1 is used for external equipment (Use 3.5

mm I put for Micropho e enabled), the audio is mixed with the

input on the Polycom microphone array input and sent to the far

end. This input will be muted when the local mute is activated.

4. SETUP WITH “Group 700”

CONNECTIONS

SETTINGS

Step1. Confirm all devices are connected properly as shown above.

Step2. Make sure that the audio output level of the AM-1 Control Unit is set to “-10dBv” and the volume

control is set to “0”.

Step3. n the web interface of Group 700, go to Admi Setti gs > Audio/Video > Audio >Audio I put.

Step4. Select nput Type Li e.

Step5. Enable Echo Ca celler.

Step6. Adjust the Audio I put Level if necessary.

Step7. While speaking to the microphone from an appropriate distance, adjust the output level with the

volume control. The Audio Meter on Group 700 should peak at about 5 dB for normal speech.

roup

700

1 Micropho e U it

Co trol U it

XLR(3P-Female) to RCA Cable

Audio I put1 (RCA

Stereo

)

1: Ground

2: Hot

3: Cold

5. SETUP WITH “HDX 7000”

CONNECTIONS

SETTINGS

Step1. Confirm all devices are connected properly as shown above.

Step2. Make sure that the audio output level of the AM-1 Control Unit is set to “-10dBv” and the volume

control is set to “0”.

Step3. n the local interface of HDX 7000, go to Admi Setti gs > Audio.

Step4. Enable Echo Ca celler.

Step5. Adjust the volume level for audio i put 1 if necessary.

Step6. While speaking to the microphone from an appropriate distance, adjust the output level with the

volume control.

(Hardware Versions A, B, C)

1 Micropho e U it

Co trol U it

XLR(3P-Female) to RCA Cable

Audio I put1 (3.5mm)

1: Ground

2: Hot

3: Cold

(Hardware Versions

)

HDX 7000

*Audio nput 1 is not associated with any particular video

input, and it is not included in audio mix of output 1.

6. SETUP WITH “HDX 8000”

CONNECTIONS

SETTINGS

Step1. Confirm all devices are connected properly as shown above.

Step2. Make sure that the audio output level of the AM-1 Control Unit is set to “-10dBv” and the volume

control is set to “0”.

Step3. n the local interface of HDX 8000, go to Admi Setti gs > Audio.

Step4. Enable Echo Ca celler.

Step5. Adjust the volume level for audio i put 1 if necessary.

Step6. While speaking to the microphone from an appropriate distance, adjust the output level with the

volume control.

HDX 8000

AM-1 Micropho e U it

Co trol U it

XLR(3P-Female) to RCA Cable

Audio I put1 (RCA Stereo

)

1: Ground

2: Hot

3: Cold

*Audio nput 1 is not associated with any particular video

input, and it is not included in audio mix of output 1.

7. SETUP WITH “HDX 9000 Series”

CONNECTIONS

HDX 9006

1 Micropho e U it

Co trol U it

XLR(3P-Female) to Phoenix

Audio I put1 (

Phoe ix

)

1: Ground

2: Hot

3: Cold

HDX 9004

HDX 9002

*Audio nput 1 is not associated with any particular video

input, and it is not included in audio mix of output 1.

SETTINGS

Step1. Confirm all devices are connected properly as shown above.

Step2. Make sure that the audio output level of the AM-1 Control Unit is set to “-10dBv” and the volume

control is set to “0”.

Step3. n the local interface of HDX 9000, go to System > Admi Setti gs > Audio > I puts/Outputs

(select if necessary).

n the web interface, go to Admi Setti gs > Audio.

Step4. Select nput Type to Li e I put. (Only for 9004/9902/9001)

Step5. Enable Echo Ca celler.

Step6. Make sure that the Pha tom Power is NOT enabled. (Only for 9004/9002/9001)

Step7. Adjust the I put Type Level if necessary.

Step8. While speaking to the microphone from an appropriate distance, adjust the output level with the

volume control. The Audio Meter on HDX 9000 should peak at about 5 dB for normal speech.

8. SPECIFICATIONS OF AM-1

MICROPHONE

Power Source 24V DC/200mA (supplied from Control Unit)

Maximum nput Sound Level 100dB SPL (at 20" distance)

S/N Ratio 90dB or more (from Control Unit)

Frequency Response 150 - 18,000Hz

Directional Angle Horizontal: 50°(450 - 18,000Hz, Array mode), 180°(Cardioid mode)

Vertical: 90°

Mute Switch Touch sensor

LED ndicator n operation (blue)

Cable STP ASE/EBU digital audio cable

Maximum Cable Length from

Control Unit 230ft (70m)

Dimensions 19.0”(W) x 0.8”(H) x 2.6”(D) (482 x 20 x 65mm)

Weight 2.4 lb (1.1kg)

CONTROL UNIT

Power Source 24V DC/400mA, from an optional AD-246 AC adapter

S/N Ratio 90dB over

Microphone nput Dedicated input for Microphone Unit, XLR-3-31 equivalent

Audio Output Analog: +4dBu ,-10dBV, -50dBu (selectable), XLR-3-32 equivalent

Digital: AES/EBU 24bit 110Ω, XLR-3-32 equivalent

Control Output volume control, Output level adjustment

LED ndicator Power (blue), Mute (red)

Ethernet 100/10Mbps (Category 5, RJ45 jack), TCP/ P HTTP

Dimensions 4.1”(W) x 1.9”(H) x 8.7”(D) (105 x 48 x 221mm)

Weight 1.3 lb (0.6kg)

Andere Handbücher für AM-1

Inhaltsverzeichnis

Andere Toa Konferenzsystem Handbücher

Toa

Toa TS-801 Bedienungsanleitung

Toa

Toa TS-D1000 Series Bedienungsanleitung

Toa

Toa TS-800 Series Bedienungsanleitung

Toa

Toa TS-D1000 Series Bedienungsanleitung

Toa

Toa TS-821 Bedienungsanleitung

Toa

Toa TS-920 Series Bedienungsanleitung

Toa

Toa TS-700 Bedienungsanleitung

Toa

Toa TS-820 Series Bedienungsanleitung

Toa

Toa TS-910 s Bedienungsanleitung

Toa

Toa TS-911 Bedienungsanleitung

Toa

Toa Venas VM-2120 Bedienungsanleitung

Toa

Toa AM-CF1B Benutzerhandbuch

Toa

Toa TS-801 Bedienungsanleitung

Toa

Toa TS-D1100 Series Bedienungsanleitung

Toa

Toa TS-900 Series Bedienungsanleitung

Toa

Toa TS-920RC Bedienungsanleitung

Toa

Toa TS-910 Series Bedienungsanleitung

Toa

Toa TS-800 Series Bedienungsanleitung

Toa

Toa TS-770 Bedienungsanleitung

Toa

Toa TS-D1000-CU Bedienungsanleitung

Toa

Toa IP-1000 Series Bedienungsanleitung

Toa

Toa YW-1022 Bedienungsanleitung

Toa

Toa TS-910 Series Bedienungsanleitung

Toa

Toa TS-D1100 Series Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung