Toa IP-1000 Series Bedienungsanleitung

Operation Manual

IP PoE Wall Mount Speaker

BS-PE678IP1

Thank you for purchasing TOA IP-1000 series products.

Please carefully read the instructions in this manual to ensure long-term and fault-free operation of the equipment.

TOA Corporation

Chapter 1

Safety Precautions

1-1

Chapter 1 Safety Precautions

Please observe the warnings and safety instructions.

After reading this manual, please properly place it for easy access and reference in the future.

Warning

This sign indicates that potential safety hazards would occur if the equipment is opened for operation

and serious injury or death would be caused to non-professionals who do not operate the equipment

properly.

This sign is used to alert users that the information attached to the equipment includes important

instructions of operation and maintenance (repair).

At setup and installation

(1) Preventing from water

Do not expose the equipment to rain or environment possibly contaminated by water or other liquids, or a

fire or electric shock may be caused.

(2) Applying the specified supply voltage

Be sure to apply the voltage indicated on the equipment.

If a voltage higher than the indicated voltage is applied, a fire or electric shock may be caused.

(3) Protecting the power cord

Do not scratch, cut or twist the power cord.

In addition, the power cord should be away from heating bodies. Do not place heavy objects (including the

equipment itself) on the power cord, or it may cause a fire or electric shock.

At operation

(1) In case of exceptions

Immediately cut off the power supply in case of the following exceptions during operation and contact the

dealer. If it continues to be used, a fire or electric shock may occur.

• Smoke or smell.

• Water or foreign bodies intrusion.

• Fall or case damage.

• Power cord damage (core is exposed or cord is broken).

• Unable to access to network or free of sounds, etc.

(2) Do not open the equipment or transform it.

Do not drop foreign bodies into the equipment.

Do not drop foreign bodies like metal or flammable objects into the equipment, or a fire or electric shock

may be caused.

(3) No touch at lightning

Do not touch the equipment and plugs at lightning to avoid electric shock.

(4) Do not place containers containing liquid or small metal objects above the equipment.

If a container is accidentally knocked over and the liquid flows into the equipment, a fire or electric shock

may be caused.

1-2

(5) Do not open the equipment or transform it.

High-voltage parts are installed in the equipment. If the equipment is uncovered or transformed, a fire or

electric shock may be caused. All maintenance and internal transformation of the equipment should be

performed by professionals.

(6) Precautions when maintenance or not used for a long time

When maintenance is performed or the equipment is not used for 10 days or more, shut off the power

and pull out the plug to ensure safety. If failing to observe this provision, a fire or electric shock would

occur.

Chapter 2

Product Description

2-1

Chapter 2 Product Description

2.1 Overview

BS-PE678IP1 is an IP PoE wall mount speaker and can receive the broadcast from other terminals or servers

supporting the setting of functions through browser. It can detect circuit faults and operating state of the speaker

and display them on the server software.

(1) Receiving broadcast sounds

BS-PE678IP1 can receive broadcast sounds from servers or other terminals.

(2) Time program broadcasting

It can upload the sounds required to be broadcast at various periods each day to the server and prepare

plans for broadcast. BS-PE678IP1 can achieve automatic broadcast according to the tasks scheduled by the

server.

(3) System setup through browser

Users can set up network，audio parameters and modify login password of the speaker through browser to

achieve personalized settings.

(4) External Power Supply input

BS-PE678IP1 can be powered via PoE or external DC24V power.

(5) Audio check

BS-PE678IP1 has a self-detection function and can detect the operating state of the speaker through circuit.

(6) Indicator light of operating status

BS-PE678IP1 is equipped with indicator lights of operating status and can quickly detect the operating state

of the speaker by recognizing the color and flashing of indicator lights.

2-2

Chapter 2Product Description

2.2 Terminal description

①Power Input connector: DC24V/1A is required, power supply input for network wall speaker. (Note: This

equipment supports POE power supply. If the network interface is connected to POE switch, no power supply is

needed)

"+" indicates the positive pole of DC24V, and "-" indicates the negative pole of DC24V power supply.

②Speaker Output connector: Extended speaker can be attached. When the network wall speaker receives the

broadcast, the same broadcast sound can be heard from the extended speaker.

③Network connector: The connector is RJ-45 standard, insert the network cable to connect the switch, so that

the equipment can login to the server normally. The network interface is equipped with two-color (green,

orange) indicator light, which can indicate the working status of the network wall-mounted loudspeaker. (Note:

This equipment supports POE power supply. If the network interface is connected to POE switch, no power

supply is needed)

Operating state

Indicator light

Power

The Orange light is ON

Network connection successful

The

Green light is ON.

Receiving broadcast

The green l

ight

is flashing.

Note: The Power Supply Input and Extended Speaker output interface are connected through 3.5-4P

terminal-block. The wiring steps are as follows:

Orange

Green

Power Input

①

Loo

sen

③Tighten

②Insert cables

Terminal

block

(3.5

4P)

Chapter 3

Wiring

3-2

Chapter 3 Wiring

3.1. Installation instructions

Required accessories

The required parts are attached as accessories.

Fixing screw M4×35 (2 pcs)

Step 1 Pull out the mask of BS-PE678IP1. Loosen

the two springs to separate the mask from the

bottom case.

Step 2 Install BS-PE678IP1 with the attached

fixing screws(M4*35).

Note:

BS-PE678IP1 can be installed horizontally or

vertically. Both concealed wiring (wiring inside

wall) and open wiring (wiring outside wall) are

applicable to BS-PE678IP1.

○

A Cable entry hole

(applicable to horizontal installation through

open wiring)

○

B Cable entry hole

(applicable to horizontal installation through

concealed wiring)

○

C Cable entry hole

(applicable to vertical installation through

concealed and open wiring)

Step 3 Re-install the mask on the bottom case.

Note: When BS-PE678IP1 is not aligned with its

trademark, gently pull up the trademark and

rotate it to a proper position.

3-3

Chapter 3 Wiring

3.2 Reference dimensions

Reference dimensions (unit: mm)

Andere Handbücher für IP-1000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toa Sprecher Handbücher

Toa

Toa ME-120 Bedienungsanleitung

Toa

Toa PC-1869EN Bedienungsanleitung

Toa

Toa IP-1000 Series Bedienungsanleitung

Toa

Toa BS-20W/WHT Bedienungsanleitung

Toa

Toa PJ-304 Bedienungsanleitung

Toa

Toa HS-P1500W AS Bedienungsanleitung

Toa

Toa ER-1000A-BT Bedienungsanleitung

Toa

Toa H-3/WP Bedienungsanleitung

Toa

Toa TZ-S240W-AS Bedienungsanleitung

Toa

Toa PC-275AB-EB Bedienungsanleitung

Toa

Toa PE-154BS Bedienungsanleitung

Toa

Toa PC-6WM-EB Bedienungsanleitung

Toa

Toa HLS46UL-8 Bedienungsanleitung

Toa

Toa CS-304U Bedienungsanleitung

Toa

Toa HLS46S-8 Bedienungsanleitung

Toa

Toa VX-3308WM Bedienungsanleitung

Toa

Toa HS-1200BT Bedienungsanleitung

Toa

Toa SC-P620-AS Bedienungsanleitung

Toa

Toa SM-25A Bedienungsanleitung

Toa

Toa PE-154BS Bedienungsanleitung

Toa

Toa F-605 Bedienungsanleitung

Toa

Toa BS-1030 Bedienungsanleitung

Toa

Toa BS-P678IP1 Bedienungsanleitung

Toa

Toa HY-PF1B Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung