Toa SR-F05 Bedienungsanleitung

INSTRUCTION MANUAL

SPEAKER SYSTEMS

Thank you for purchasing TOA’s Speaker system.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

SR-F05

SR-M05L

SR-M05R

1. FEATURES

• Developed for the sound reinforcement (SR) market, the speaker features high power handling capacity, high

quality sound, and heavy-duty construction.

• The SR-F05 is a compact, trapezoidal, full-range speaker system and can be used as a main speaker or sub-

speaker. The SR-M05L and SR-M05R are oor monitor speakers, and they are symmetrical.

• An internal passive network enables the speaker to be driven by a single power amplier. (The Digital

Processor must be used together.)

• The speaker has a high-efciency 25 cm (10") woofer with a large magnet (180 mm or 7" in diameter), and a

tweeter with a high power driver employing a titanium diaphragm.

• The SR-F05's HF horn is a constant directivity (CD) horn to provide a 90° horizontal by 40° vertical dispersion.

The SR-M05's HF horn is a CD horn to provide a 40° horizontal by 40° vertical dispersion.

• The SR-F05 can be installed on an optional speaker stand without using any extra mounting device.

In addition, it can be mounted to the ceiling, wall, and ceiling pipe if optional mounting kits are used.

• The rugged MDF (medium density ber) board enclosure (18 mm or 0.7" in thickness) is nished with shock-

resistant urethane coating.

• Input connectors are Neutrik NL4MPXXs. The SR-F05 also comes with a screw terminal besides the Neutrik

connectors if it is used for permanent installation applications (engineering sound market).

315 (12.4")

120 (4.7")

241 (9.49")

241 (9.49") 444 (17.48")

444 (17.48") 404 (15.91")

274 (10.79")

[SR-F05] [SR-M05L]

Note

SR-M05L and SR-M05R

are symmetrical.

Unit : mm (in)

(17.5°)

2. INPUT CONNECTORS

Each speaker's input connectors are as follows. Because each connector is internally connected in parallel,

connections may be made from any connector.

• Each pin of the Neutrik NL4MPXX connector is

connected as shown below.

3. INPUT CONNECTOR CONNECTION

Pin number SR-F05/M05L/M05R

1+ Speaker +

1– Speaker –

2+ –

2– –

Screw terminal

SR-M05L/R

SR-F05

Speaker +

Speaker –

Speaker +

Speaker –

Neutrik NL4MPXX

connector x 2

Neutrik NL4MPXX

connector x 2

Screw terminal

SR-M05L/R

SR-F05

Neutrik NL4MPXX

connector

Neutrik NL4MPXX

connector

ChannelSpeaker System Gain

(dB) Polarity Delay

(msec)

TYPE

Filter

HPF (12dB) 63 0.707

0.979

0NORMAL

NORMAL

SR-F05

SR-F05+SR-L05

SR-M05L/R

PEQ

−5.0

−3.0

3.134

4.318

1.707

INVERSE

4.0k

8.0k

0.707

SR-L05

HPF (12dB)

LPF (12dB)

Gain (dB)

Freq. (Hz)

100

355

−3.0

4.0k

0.707

PEQ

8.0k −5.0

−5.0

4.318

PEQ 14.0k

14.0k

+6.0

+5.0

+6.0

+9.5

+5.5

+9.5

3.134

04.0k

2.016

8.0k

14.0k

SR-F05

SR-M05L/R

• Applicable cable connector is Neutrik NL4FC.

4. DIGITAL PROCESSOR SETTINGS

6. FLOOR MONITOR SPEAKER INSTALLATION

The SR-M05L and SR-M05R are designed for installation on

the at oor surface.

The parameters set on the Digital Processor permit the speaker

systems to reproduce the best quality of sound under this

installation condition. If installed above the oor, the speaker

systems cannot provide the intended sound quality.

5. CONNECTIONS

5.1. Basic Connection Diagram

5.2. Usable Power Amplifiers

As a principle, the output power of the power amplier needs to be over 300 W (per channel and 8 Ω load).

If the amplier rating is below 300 W, then the speaker cannot be operated to the fullest of its capability.

5.3. Parallel Operation of Two Speaker Systems

Cascade connection is possible for parallel operation of two speaker systems as shown in the gure below.

In this case, the power amplier output must be over 450 W (per channel and 4 Ω load).

Parallel operation of two SR-F05s Parallel operation of SR-M05L and SR-M05R

INPUT

INPUT MAIN OUT

MAIN OUT

BASS OUT

SR-M05L/R

SR-F05

Power Amp.

Subwoofer

Digital Processor

Traceability Information for Europe

Manufacturer:

TOA Corporation

7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo, Japan

Authorized representative:

TOA Electronics Europe GmbH

Suederstrasse 282, 20537 Hamburg, Germany

8. SPECIFICATIONS

7. CHARACTERISTIC DIAGRAMS

[SR-F05 Frequency response]

(1 kHz, 1/4 W input reference)

[SR-M05L/R Frequency response]

(1 kHz, 1/4 W input reference, speaker installed on oor)

[SR-F05 Directivity characteristics]

• Vertical

• Horizontal

133-01-00152-01

The specications of products on this instruction manual are available in TOA DATA Library (https://www.toa-

products.com/international/).

Scan the QR Code at right with your mobile phone camera to access the WEB site and search for

this product number.

Note: "QR Code" is a registered trademark of DENSO WAVE INCORPORATED.

• Optional product

Stand: ST-34B (SR-F05 only)

URL: https://www.toa.jp/

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toa Sprecher Handbücher

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung