Toastmaster AACU-MISER AM24SS Technisches Datenblatt

Toastmaster®

A Middleby Company

Middleby Cooking Systems Group • 1400 Toastmaster Drive • Elgin, IL 60120 • (847)741-3300 • FAX (847)741-4406

Part No. 37813

Price $15.00

P Apr. 98 Rev B

OWNER'S OPERATING

& INSTALLATION

MANUAL

AM24SS and AM36SS

Griddles

™

oastmaster®

AM24SS

Toastmaster • 1400 Toastmaster Dr. • Elgin, IL 60120-9272 • (847) 741-3300 • FAX (847) 741-4406

Middleby Corp 24-Hour Service Hotline 1-800-238-8444

is a registered trademark of Toastmaster, A Middleby Company.

is a trademark of Toastmaster, A Middleby Company.

NO QUIBBLE LIMITED WARRANTY

TOASTMASTER, HEREINAFTER REFERRED TOAS THE SELLER, WARRANTS

EQUIPMENT MANUFACTURED BY IT TO BE FREE FROM DEFECTS IN MATERIAL

AND WORKMANSHIP FOR WHICH IT IS RESPONSIBLE. THE SELLER’S

OBLIGATION UNDER THIS WARRANTY SHALL BE LIMITED TO REPLACING OR

REPAIRING, AT SELLER’S OPTION, WITHOUT CHARGE, ANY PART FOUND TO

BE DEFECTIVE AND ANY LABOR AND MATERIAL EXPENSE INCURRED BY

SELLER IN REPLACING OR REPAIRING SUCH PART. SUCH WARRANTY SHALL

BE LIMITED TO THE ORIGINAL PURCHASER ONLY AND SHALL BE EFFECTIVE

FORAPERIOD OF ONE YEAR FROM DATE OF ORIGINAL INSTALLATION, OR 18

MONTHS FROM DATE OF PURCHASE, WHICHEVER IS EARLIER; PROVIDED

THAT TERMS OF PAYMENT HAVE BEEN FULLY MET.

As part of Toastmasters

“no quibble” warranty,

allin-warrantyToastmaster productsthatrequire

service, are to be serviced on site.

The warranty period for Accu-Miser griddles shall be 24 months from the date of installation or 30

months from the date of purchase, whichever is earlier.

Normal maintenance functions, including lubrication, cleaning, or customer abuse, are not covered by

this

“no quibble” warranty.

Seller shall be responsible only for repairs or replacements of defective parts performed by Seller’s

authorized service personnel. Authorized service agencies are located in principal cities throughout the

contiguous United States,Alaska, and Hawaii. This warranty is valid in the 50 United States and is void

elsewhere unless the product is purchased through Middleby International with warranty included.

The foregoing warranty is exclusive and in lieu of all other warranties, expressed or implied.

There are no implied warranties of merchantability or of fitness for a particular purpose.

The foregoing shall be Seller’s sole and exclusive obligation and Buyer’s sole and exclusive remedy for

any action including breach of contract or negligence. In no event shall Seller be liable for a sum in

excess of the purchase price of the item. Seller shall not be liable for any prospective or lost profits of

Buyer.

™

WARNING: IN CASE OF FIRE

Disconnect the griddle from its power source IMMEDIATELY. Shutting down the electrical

heating elements allows the unit to cool, making it easier to put out the fire.

WARNING: FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE

OR OTHER FLAMMABLE VAPORS OR LIQUIDS

IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE

CAUTION

Use only a fire extinguisher filled with CO2, which is suitable for electrically powered

equipment. Do NOT attempt to fight a grease fire by aiming the nozzle of the fire extinguisher

directly at the burning grease. The force will cause the burning grease to be sprayed to

adjoining equipment, making it difficult to contain the fire.

CAUTION

Using any parts other than genuine Toastmaster factory parts relieves

the manufacturer of all liability.

IMPORTANT

Toastmaster (manufacturer) reserves the right to change specifications and product design

without notice. Such revisions do not entitle the buyer to corresponding changes,

improvements, additions or replacements for previously purchased equipment.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

This manual provides detailed information for installation and operation of your Accu-Miser griddle. It

also contains information to assist the operator in diagnosing problems in the event of a malfunction.

This manual is an important tool for the operator and should be kept readily available.

TABLE OF CONTENTS

SECTION 1

DESCRIPTION............................................................................................................................................... 1

A. Features.............................................................................................................................................1

B. ComponentLocation..........................................................................................................................1

C. Specifications.....................................................................................................................................2

D. ElectricalSpecifications.....................................................................................................................2

E. DimensionalDrawings.......................................................................................................................3

SECTION 2

INSTALLATION..............................................................................................................................................5

A. ShippingDamage Inspection.............................................................................................................5

B. Unpackingthe Griddle....................................................................................................................... 5

C. Installation..........................................................................................................................................5

D. ElectricalConnection.........................................................................................................................6

E. InitialCleaning................................................................................................................................... 6

F. Testing theInstallation....................................................................................................................... 6

SECTION 3

OPERATION...................................................................................................................................................7

A. Controls..............................................................................................................................................7

B. Seasoning theGriddle....................................................................................................................... 7

C. OperatingHints and Safety................................................................................................................7

D. DailyOperation and Maintenance......................................................................................................8

E. Troubleshooting................................................................................................................................. 9

SECTION 4

WIRING DIAGRAMS......................................................................................................................................10

A. WiringDiagram -AM24SS.................................................................................................................10

B. WiringDiagram -AM36SS.................................................................................................................11

iii

SECTION 1

DESCRIPTION

A. Features

Models:

• AM24SS, 24” (610mm) wide, two 12” (305mm) infrared heat panels

• AM36SS, 36” (914mm) wide, three 12” (305mm) infrared heat panels

Accu-Miser Series SS griddles are:

• Electrically heated by infrared emitter panels

• Temperature-controlled by solid-state thermostat

• Counter-top mounted

The Accu-Miser griddle employs infrared cooking technology. Infrared heat panels are located below the

griddle plate. Each panel is 12” (305mm) in width, and provides uniform heat distribution across its surface.

Athermostatic solid-state controller for eachpanel accurately maintainsthe set griddlecooking temperatures

for consistent and repeatable results. Each thermostat has a range of 150°F (83°C) to 450°F (232°C).

The individual controls and thermostat allow independent temperature settings for each panel. This feature

divides the griddle plate into 12” (305mm)-wide zones that can cook different food products simultaneously.

B. Component Location

Splash Guard

Griddle

Plate

Grease Trough

(front)

Grease Chute

(rear)

Grease Chute

(front)

Thermostat Control

Knob

Heating Indicator

Light

On/Off Switch

Grease Drawer

4” (102mm) legs (4)

(countertop griddles only)

Grease Trough

(rear)

(AM24SS shown)

Spacer bracket (2)

SECTION 1 - DESCRIPTION

C. Specifications

Griddle plate dimensions AM24SS 24” (610mm) D x 23-7/8” (606mm) W

AM36SS 24” (610mm) D x 35-7/8” (911mm) W

Overall dimensions AM24SS 32-1/8” (816mm) D x 24” (610mm) W x 17-7/8” (454mm) H

AM36SS 32-1/8” (816mm) D x 36” (914mm) W x 17-7/8” (454mm) H

Overall weight AM24SS 170 lbs. (77.2kg)

AM36SS 244 lbs. (110.8kg)

Shipping dimensions AM24SS 33” (838mm) D x 29” (737mm) W x 18” (457mm) H

AM36SS 33” (838mm) D x 40” (1016mm) W x 17” (432mm) H

Shipping weight AM24SS 177 lbs. (80.4kg)

AM36SS 254 lbs. (115.3kg)

Outer body steel All Front: 16-gauge stainless steel

Sides: 20-gauge stainless steel

Griddle All 3/8” (9.5mm) thick, uniform heat distribution design

Grease trough AM24SS

3-1/2” (89mm) D (front-to-back) x 23-7/8” (606mm) W, front and rear

AM36SS

3-1/2” (89mm) D (front-to-back) x 35-7/8” (911mm) W, front and rear

Heat source All One infrared heat emitter panel per 12” (305mm) of griddle width

Allowable temperature range All 150°F (83°C) to 450°F (232°C)

D. Electrical Specifications

IMPORTANT

CONSULT ALL APPLICABLE NATIONAL AND LOCAL CODES BEFORE CONNECTING THE GRIDDLE TO

ITS ELECTRICAL POWER SOURCE.

Loading kW/phase Nominal current/line wire

Model Voltage kW rating

X-Y Y-Z X-Z X Y Z

Pwr. cord length Plug type

AM24SS 208V 6.2kW 3.1kW 3.1kW - 15.0A 26.0A 15.0A 6’ (1829mm) NEMA 15-50P

240V 6.2kW 3.1kW 3.1kW - 13.0A 22.5A 13.0A 6’ (1829mm) NEMA 15-50P

AM36SS 208V 9.4kW 3.1kW 3.1kW 3.1kW 26.0A 26.0A 26.0A 6’ (1829mm) NEMA 15-50P

240V 9.4kW 3.1kW 3.1kW 3.1kW 22.5A 22.5A 22.5A 6’ (1829mm) NEMA 15-50P

SECTION 1 - DESCRIPTION

E. Dimensional Drawings

NOTES

SECTION 1 - DESCRIPTION

SECTION 2

INSTALLATION

A. Shipping Damage Inspection

IMPORTANT

IT IS THE CUSTOMER’S RESPONSIBILITY TO

REPORT ANY CONCEALED OR NON-

CONCEALED DAMAGE TO THE FREIGHT

COMPANY.

1. All shipping containers should be examined

fordamage beforeand during unloading. This

equipment was carefully inspected and

packaged at the factory. The freight carrier

has assumed responsibility for its safe transit

and delivery. If the equipment is received in a

damaged condition, either apparent or

concealed, a claim must be made with the

delivering carrier.

Apparent Damage or Loss

- If the damage or

lossis apparent,it must benoted onthe freight

bill or on the express receipt at the time of

delivery, and must be signed by the carrier’s

agent(thedriver). If thisisnot done,thecarrier

may refuse the claim. The carrier will supply

any necessary claim forms.

Concealed Damage or Loss

- If damage or

lossis NOT apparentuntil after theequipment

is unpacked, a request for inspection of the

concealed damage must be made with the

carrier within 15 days. The carrier will make

an inspection and will supply necessary claim

forms. Be certain to retain all contents plus

external and internal packing materials for

inspection.

B. Unpacking

Thegriddle is deliveredin a cartonthat is fastened

to a wooden shipping pallet.

WARNING

USE CAUTION WHEN CUTTING THE

BANDING STRAPS. WHEN CUT, THE

STRAPS MAY SNAP AWAY FROM THE

CARTON.

1. Cut the banding straps that hold the carton in

place. Lift the carton up, and remove it from

over the griddle.

2. Carefully turn the pallet - with the griddle still

mounted atop it - upside-down. Remove the

bolts that fasten the pallet to the griddle.

3. Remove the pallet from the griddle.

4. Retain all shipping materials until it is certain

that the griddle has not suffered concealed

shipping damage.

C. Installation

NOTE

IF INSTALLING THE GRIDDLE ON A STAND,

CONSULT THE STAND INSTRUCTIONS FOR

THE INSTALLATION PROCEDURE. ENSURE

THATTHE LOCATION OF THE STANDALLOWS

SUFFICIENTCLEARANCEFORTHE GRIDDLE,

AS SHOWN IN THE DIAGRAM BELOW. THEN,

PROCEED TO STEP D,

ELECTRICAL

CONNECTION

IF INSTALLING THE GRIDDLE ON A

COUNTERTOP, PROCEED WITH THE

INSTRUCTIONS BELOW.

Installing the Spacer Brackets and Legs

a. Check that the griddle is still upside-down

from unpacking.

b. Place the two spacer brackets along the

sideedgesof thebottom plateoftheAccu-

Miser. The holes in the brackets should

align with the weldnuts on the bottom

plate. The flanged edge of the brackets

shouldface the

outside

ofthe griddle,with

the flange itself facing

c. Locate the four 4” adjustable legs and

thread them into the weldnuts on the leg

mounting plates. This holds the two

spacerbrackets inplace. Tightenthelegs

until they are secure against the spacer

brackets.

Leveling the Griddle

a. Carefully lift the griddle onto its legs, and

place it on the counter in its permanent

position.

b. Check that the proposed location for the

griddle provides sufficient clearance, as

showninthe diagrambelow. If notenough

clearanceis provided, relocate the griddle

as necessary.

Minimum External Clearances

c. Levelthe griddleusing a carpenter’slevel.

Then,rotate the“foot” (hexagonal)portion

of the legs to adjust the griddle to a level

position.

d. Ensure that the griddle is level from front-

to-back and from side-to-side.

D. Electrical Connection

All Accu-Miser Series SS griddles come factory-

equipped with a power cord and plug. The chart

belowshows the plug typefor each griddle model.

Model Plug type

AM24SS NEMA 15-50P

AM36SS NEMA 15-50P

IMPORTANT

THE ELECTRICAL CONNECTION TO THE

ACCU-MISERREQUIRESACIRCUITBREAKER/

FUSED DISCONNECT. THE REQUIRED

RATING OF THE BREAKER VARIES

ACCORDING TO THE MODEL OF GRIDDLE

BEINGINSTALLED. REFERTOTHE GRIDDLE’S

DATA PLATE, AND TO THE ELECTRICAL

SPECIFICATIONS TABLE (PAGE 2).

CONSULT ALL APPLICABLE NATIONAL AND

LOCAL CODES FOR FURTHER ELECTRICAL

CONNECTION REQUIREMENTS.

1. Before proceeding with the electrical

connections, check the following:

a. Check that the supply wire size is

adequate.

b. Check that the circuit breaker/fused

disconnect is present, and of the correct

rating.

Ifnecessary, referto thegriddle’sdata plate and

to the

Electrical Specifications

table (Page 2).

WARNING

ENSURE THAT THE CIRCUIT

BREAKER/FUSED DISCONNECT IS IN

THE “OFF” POSITION BEFORE

PROCEEDING.

2. Insert the power cord plug into its receptacle.

E. Initial Cleaning

WARNING

ENSURE THAT ELECTRICAL POWER

TO THE GRIDDLE HAS BEEN

DISCONNECTED BEFORE CLEANING

THE UNIT.

SECTION 2 - INSTALLATION

1. The surface of the griddle plate is coated with

a rust-preventive material to protect it during

shipment. Cleanthis material fromthe griddle

plate with a non-flammable grease solvent.

2. Wash the griddle with warm water and a mild

detergent.

3. Rinse witha damp cloth,then wipe the griddle

dry.

4. Ensure thatthegriddleis completelydrybefore

restoring electrical power to the unit.

F. Testing the Installation

IMPORTANT

BEFORE TESTING THE INSTALLATION,

FAMILIARIZE YOURSELF WITH THE ACCU-

MISEROPERATINGCONTROLS(SECTION 3A).

1. Ensure that the initial cleaning of the griddle

has been performed, as outlined in Step E

above.

2. Turn all rocker ON/OFF switches to the OFF

position.

3. Rotate all thermostat control knobs

counterclockwise to their lowest temperature

setting.

4. Switch onthecircuit breaker/fuseddisconnect.

5. Perform the following steps for each set of

controls (2 sets for AM24SS, 3 sets for

AM36SS). If any of these tests fail, contact

your Authorized Service Agent.

a. Switch the rocker ON/OFF switch to the

ON position.

b. Rotate the thermostat control knob

clockwise to a setting of 200°F (93°C).

c. Check that the heating indicator light

located beneath the thermostat control

knob illuminates.

d. Wait for a few minutes; then, check that

the zone of the griddle plate that

corresponds to the controls has begun to

heat.

e. Wait for a few minutes to check that the

heating indicator light turns off, showing

that the zone has reached the proper

temperature.

f. Rotate the thermostat control knob back

toitslowest setting. Switchtherocker ON/

OFF switch to OFF.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toastmaster Bratpfanne Handbücher

Toastmaster

Toastmaster TMGE24 - Bedienungsanleitung

Toastmaster

Toastmaster ACCU-MISER AM24 Technisches Datenblatt

Toastmaster

Toastmaster TMEG21W Bedienungsanleitung

Toastmaster

Toastmaster TG15W Bedienungsanleitung

Toastmaster

Toastmaster TMDG2400 Bedienungsanleitung

Toastmaster

Toastmaster Free-Standing Models 7224 Bedienungsanleitung

Toastmaster

Toastmaster TMGM24 - Bedienungsanleitung

Toastmaster

Toastmaster TMGE24 - Bedienungsanleitung

Toastmaster

Toastmaster TMEG15W/B Bedienungsanleitung

Toastmaster

Toastmaster TM-201GR Bedienungsanleitung

Toastmaster

Toastmaster TMDG24 Bedienungsanleitung

Toastmaster

Toastmaster TG21W Bedienungsanleitung

Toastmaster

Toastmaster TECG7324 Bedienungsanleitung

Toastmaster

Toastmaster 7072WH13 Bedienungsanleitung

Toastmaster

Toastmaster A710 Bedienungsanleitung

Toastmaster

Toastmaster TECG732467 Bedienungsanleitung

Toastmaster

Toastmaster TG21WL TG21WCAN Bedienungsanleitung

Toastmaster

Toastmaster TMGM36 - Bedienungsanleitung

Toastmaster

Toastmaster TMDG2400T Bedienungsanleitung

Toastmaster

Toastmaster TECG732467 Bedienungsanleitung

Beliebte Bratpfanne Handbücher anderer Marken

Proctor-Silex

Proctor-Silex 25340 Bedienungsanleitung

New House Kitchen

New House Kitchen NH33-C Bedienungsanleitung

Magikitch'n

Magikitch'n 24 Bedienungsanleitung

Black Stone

Black Stone 1650 Bedienungsanleitung

Anvil

Anvil FTA7116 Bedienungsanleitung

Presto

Presto 07030 Bedienungsanleitung

Pit Boss

Pit Boss PB2BGT1 Handbuch

Dyna-Glo

Dyna-Glo DGL260SNP Bedienungsanleitung

Char-Broil

Char-Broil 19952085 Bedienungsanleitung

APW Wyott

APW Wyott HMG-2424 Bedienungsanleitung

Pit Boss

Pit Boss Ultimate Griddle PB2BGD2 Bedienungsanleitung

Airxcel

Airxcel Suburban Elite SOP-1005A Bedienungsanleitung

Keating Of Chicago

Keating Of Chicago MIRACLEAN PRE-2000 Bedienungsanleitung

Nexgrill

Nexgrill 720-0786A Bedienungsanleitung

Outwell

Outwell FH-3047C Bedienungsanleitung

Rankam

Rankam Member's Mark GR2298901-MM-02 Kurzanleitung

Black Stone

Black Stone 1972 Bedienungsanleitung

Star

Star Ultra Max 760TA Bedienungsanleitung