Tocho Marking Systems Patmark Fehlerbehebungshandbuch
Continued to back page
3Install Patmark app
For Android users
For iOS users
Using the AC/DC adapter
For battery installation, slide the battery all the way in until
it makes a clicking sound.
For battery removal, slide the battery out in the opposite
direction while holding down the battery removal buttons.
Using the Battery
2Prepare for marking
Quick Startup Guide
Please read through the Startup Guide instructions carefully in advance.
Before starting: Please read all sections regarding "Safety Information" in the "Startup Guide". Not following the instructions could lead to accidents
and/or damages.
1Check contents
Indication on the nameplate
The serial number that is indicated on the nameplate will be shown as WiFi SSID,
when the Patmark is turned ON. *e.g. Patmark12345
Contents in package
Patmark or Patmark-mini unit
①
AC/DC Adapter and Power Code
②
Centering Tool (Only for Patmark-mini)
③
USB cable
④
1
3
2
①②
⑥
⑤
6
4
2
5
1
7
3
RATED INPUT : DC24V 5A (AC adapter) / DC25.2V 2.0Ah (Battery)
IP CLASSFICATION : IP20
MFG date [6 digits] Serial Number [5 digits]
1Download and install the latest Patmark app.
2Power on the Patmark unit.
3Open the WiFi settings on your device then search
the SSID of the Patmark and connect.
3 steps to download Patmark app
Follow the proper connection sequence.
Not following the correct sequence could
create a static charge in the DC output plug of the
AC adapter, potentially resulting in an electric
shock or minor injury. Also, make sure the
adapter's plug does not touch metal parts other
than the Patmark power connector .
CHECK !
Be sure to install the included protection
cover on the Patmark terminal before using.
Not following these steps could result in a short circuit.
CHECK !
CHECK !
Charge the battery fully before use.
CHECK !
※
Connect the power cord to
AC adapter.
Plug the AC adapter
into the Patmark jack.
Finally, plug the power
cord into the outlet.
1
2
3
4
Battery Pack and Charger (Only for BA model)
⑤
5
⑦Spacer (Only for Patmark-mini)
* Note : See the attached "Instructions for Deeper Marking
Applications" for the spacer usage.
7
Carry case (Only for Patmark-mini)
⑥
6
* Optional carry case for Patmark is available
USB connection WiFi Connection
5
Start marking
As shown in the figure, make sure
to hold Patmark using both hands.
Then, click the Start/Stop trigger
button once and let go of the button.
During the marking process, tightly
hold onto the Patmark with both hands.
4
Start operation
1 Verify the "WiFi" symbol turns green(Connected).
If the "WiFi" symbol is grey, click on it to reconnect.
2 Choose a machine model.
3 Enter the text and click on the "Next" button.
Alphanumeric characters and various symbols
are accepted.
4 Select the settings of the font size, marking force,
and quality(resolution). Then click the "Send" button.
* Screenshots using Android device
* See the "Startup Guide" for more details or
iOS operation.
edited on April 2020 CopyrightTokyoChokokuMarkingProductsCo.,Ltd.2020
Quick Startup Guide
Download th latest PM Win Software using the website below.
*Choose "Install" if security software detects.
*Registration is required on first log-in.
Extract the zip file after downloading is completed. Then click the
Setup.exe to start installation. *If security warning pops up during
installation, continue with the "Run" option from the details button.
Open PM Win Software, then enter default password "0000".
Under communication method, choose either "USB" or "WiFi".
Your selection will be highlighted in Orange. Click the "Install USB Driver"
button [*1] if your PC doesn't allow
the auto installation, then click "USB"
icon [*3] to connect. If still unable to
connect, see the "View Installation
Manual USB Driver" button [*2].
Power on the Patmark unit. Find the
Patmark SSID in the WiFi Setting on
your computer, then connect. Under
communication in PM Win Software,
click the "WiFi" icon [*3] to connect.
●- Internet access is required for software download.
*ForWindows7orhigher ●- Install software on the Patmark User's computer.
●- PM Win Software is compatible for both Patmark & Patmark-mini units.
How to install PM Win Software
Read first
1
3 4
2
Tocho Marking Systems America, Inc.
Address : 4025 Spencer Street, Suite 401, Torrance CA, 90503 TEL : +1-310-214-3367 FAX : +1-310-214-3372
WEB：https://tocho-america.com
Contact information for support
http://download.tokyo-chokoku.co.jp/en/
PMWinSoftware
CHECK !
Choose the 'Save' or 'Save as'
if you are asked in the 'File Download'.
Extracting ZIP file
is necessary.
PatmarkV4.04.03
Home Share
PC Downloads PatmarkV4.04.03 SearchPatmarkV4.04.03
ThisPC
3DObjects
Datemodified
XXXX/X/XXX:XX
XXXX/X/XXX:XX
XXXX/X/XXX:XX
XXXX/X/XXX:XX
Filefolder
Filefolder
Application
Configurationsett...
548KB
1KB
Type Size
Downloads
Desktop
Documents
Pictures
Videos
Music
OS(C:)
4items
ViewFile
If the data is longer than the
marking area, press the left
and right arrows to view the
entire data.
CHECK !
Pressing the "Clear" button will
delete the data on the preview
screen
CHECK !
http://download.tokyo-chokoku.co.jp/en/
Enterandsearch
00:00
20XX/XX/XX
環境設定
Watch our "Programming Tips" videos in the "Support" section on our website,
https://www.tocho-america.com/support/
Please read through the Startup Guide instructions carefully in advance.
Before starting: Please read all sections regarding "Safety Information" in the "Startup Guide". Not following the instructions could lead to accidents
and/or damages.
1 2
3 4
1
To download software, manual, drawing and maintenance tips, select an icon below.
New relesed software
File Name Uploded at Description
Description
File Name
PMWinSoftware
PatmarkVX.X.X
File Name
PatmarkVerX.XX.XX-[[]Machinemodel:Patmark]
File(F)Preferences(S) Edit(E) FileMarking(M) BarcodeScanMarking(B) CSVMarking(V) DXFConverter(X) BMPConverter(P) FontEditor(O) LogoEditor(L)
Preferences
Preferences
DefaultSSID
Newsettings
*Inputmax8charectersusingalphabet[upperandlower]and
numericandsymbols[+-#].
CommunicationSettings
Communicationmethod
※2
※1
CHECK !
CHECK !
※3
WARNING
Hotsurface
PatmarkVerX.XX.XX-[[]Machinemodel:Patmark]
File(F)Preferences(S) Edit(E) FileMarking(M) BarcodeScanMarking(B) CSVMarking(V) DXFConverter(X)
BMPConverter(P) FontEditor(O) LogoEditor(L)
InputText
StopWatch
Force Quality
環境設定環境設定
入力して検索
00:00
20XX/XX/XX
PatmarkVerX.XX.XX-[[]Machinemodel:Patmark]
File(F)Preferences(S) Edit(E) FileMarking(M) BarcodeScanMarking(B) CSVMarking(V) DXFConverter(X) BMPConverter(P) FontEditor(O) LogoEditor(L)
InputText
StopWatch
Force Quality
Changethesetting
Patmark12345
XXXXXX123456789
secured
XXXXXX101010101010
Connected,secured
Properties
XXXXXX7777777
secured
XXXXXX000098765
secured
XXXXXX246810
secured
NetworktoInternetconnection
Disconnect
入力して検索
00:00
20XX/XX/XX
WARNING
Hotsurface
ON
OFF
12345
* The connection is a closed network without Internet access.
CHECK !
