Tohnichi WQL Series Bedienungsanleitung

ANGLE TORQUE WRENCH

MODEL WQL

OPERATING MANUAL

TOHNICHI MFG. CO.,LTD.

TOKYO, JAPAN

INDEX

1. PRECAUTIONS

2. PRECAUTIONS FOR USE

3. OUTLINE

4. SPECIFICATIONS

5. EXTERNAL VIEW

6. OPERATING PROCEDURE

1. PRECAUTIONS

Before using this ANGLE TORQUE WRENCH, be sure to carefully read all the manuals. If you have

any questions, please contact your Tohnichi distributor or Tohnichi for assistance.

Please keep this manual for future reference.

 Don’t use the angle torque wrench beyond the maximum torque setting. This will cause damage or

injury.

 Don’t drop the angle torque wrench or apply a strong shock or jolt. This will cause damage or

deformation as well as decrease the accuracy and durability, which may cause an accident or injury.

 Don’t use this angle torque wrench except for tightening purpose. This is a angle torque wrench for

bolt tightening only.

 Don’t expose the angle torque wrench to water or oil. It will result in a possible breakdown or

cause damage.

 Remove any dirt such as dust, mud, oil and water, etc. after each use and before storing the angle

torque wrench.

2. PRECAUTIONS FOR USE

 Do not touch connecting portion of the pointer of the unit and the flexible tube with a hand when

using the ANGELE TORQUE WRENCH.

 Handle with care when using the ANGLE TORQUE WRENCH. The wrench is a measuring tool.

 Set the torque within the torque range.

3. OUT LINE

 Most suitable for small-lot production, disassembly and re-assembly, maintenance, and after service.

 Can be used for engine head bolts and bolts for connecting rods. In fact anywhere tightening must

be done by angle control method.

 Excellent for backing up production line facilities.

 Available as an ordinary torque wrench.

4. SPECIFICATIONS

Angle Scale Capacity Dimension

Model Graduations Max.

Reading

Min. 〜Max. Graduations Overall

Length

Square

Drive

450WQL 2゜360゜(50) 100〜５００ kgf.cm 5 kgf.cm 260 mm 1/2”

900WQL 2゜360゜(100) 200〜900 kgf.cm 10 kgf.cm 345 mm 1/2”

1800WQL 2゜360゜(300) 400〜1800 kgf.cm 20 kgf.cm 495 mm 1/2”

2800WQL 2゜360゜(3) 4〜28 kgf.m 0.2 kg.m 695 mm 3/4”

4200WQL 2゜360゜(4) 6〜42 kgf.m 0.3 kg.m 975 mm 3/4”

WQL50N 2゜360゜(5) 10〜50 N..m 0.5 N.m 260 mm 1/2”

WQL100N 2゜360゜(10) 20〜100 N..m 1 N.m 345 mm 1/2”

WQL200N 2゜360゜(30) 40〜200 N..m 2 N.m 495 mm 1/2”

WQL280N 2゜360゜(30) 40〜280 N..m 2 N.m 695 mm 3/4”

WQL420N 2゜360゜(40) 60〜420 N..m 3 N.m 975 mm 3/4”

4. EXTERNAL VIEW

Knob

Scale

Flexible Tube

Major Scale

Clip

Minor Scale

Handle

Pointer

6. OPERATING PROCEDURE

1) Set the desired snug torque.

2) Connect the flexible tube to the pointer adapter and fix the clip to the work piece or the bolt nearby.

3) Engage the socket with a bolt.

4) To preset angle:

Set the pointer to the desired angle and start tightening. After the snug torque is reached, the angle scale

starts moving. Tighten the bolt until the angle scale reads zero degree.

5) To read angle:

Set the pointer to zero degree on the angle scale. After the snug torque is reached, the angle scale starts

moving. Tighten the bolt until the desired torque is reached.

6) To use the wrench as an ordinary torque wrench:

Remove the flexible tube from the pointer adapter and set the desired torque. Tighten the bolt until a

“click”is heard.

7) To attach a magnet base:

Remove the nut that fixes the clip and flexible tube. Insert the top screw (M8X1.25) of the flexible tube

into the screw hole in the magnetic base and tighten.

Note: Recommended magnetic base is Kanetsu MB-PB or Fuji Jiko BR-50.

TOHNICHI MFG. CO.,LTD.

16-5, Omori-Nishi 1-Chome, Ota-Ku, Tokyo, Japan

Tel: 81-3-37622455 Fax: 81-3-37613852

N.V.TOHNICHI EUROPE S.A.

Industrieweg 27, Boortmeerbeek B-3190, Belgium

Tel: 32-16-606661 Fax: 32-16-606675

TOHNICHI AMERICA CORP.

677 Academy Drive, Northbrook, Illinois 60062, U.S.A.

Tel: 1-847-2728480 Fax: 1-847-2728714

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tohnichi Elektrowerkzeuge Handbücher

Tohnichi

Tohnichi CTA2-G Bedienungsanleitung

Tohnichi

Tohnichi CTB10N2X8D-G Bedienungsanleitung

Tohnichi

Tohnichi SP Bedienungsanleitung

Tohnichi

Tohnichi QSP Series Bedienungsanleitung

Tohnichi

Tohnichi SP Series Bedienungsanleitung

Tohnichi

Tohnichi YCL2 Bedienungsanleitung

Tohnichi

Tohnichi QL25N Series Bedienungsanleitung

Tohnichi

Tohnichi MTQL Bedienungsanleitung

Tohnichi

Tohnichi TW750N2 Bedienungsanleitung

Tohnichi

Tohnichi SF Bedienungsanleitung

Tohnichi

Tohnichi PHL Bedienungsanleitung

Tohnichi

Tohnichi QRSP-SP2-N Series Bedienungsanleitung

Tohnichi

Tohnichi QLLS Bedienungsanleitung

Tohnichi

Tohnichi T-FHM Bedienungsanleitung

Tohnichi

Tohnichi QL2N Bedienungsanleitung

Tohnichi

Tohnichi FH256MC Bedienungsanleitung

Tohnichi

Tohnichi DB SERIES Bedienungsanleitung

Tohnichi

Tohnichi DATA TORK CEM3-G-WF Bedienungsanleitung

Tohnichi

Tohnichi CL2NX8D Bedienungsanleitung

Tohnichi

Tohnichi CTB Bedienungsanleitung

Tohnichi

Tohnichi DATA TORK CEM3-G Bedienungsanleitung

Tohnichi

Tohnichi TiQL Bedienungsanleitung

Tohnichi

Tohnichi PQLZ Bedienungsanleitung

Tohnichi

Tohnichi CLE2 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch