02
Precautions on Electric Power
·Do not use any power supply other than AC 220-240V for
TOKIT Razor Cooktop Pro to avoid fire or electric shock.
·
Disconnect the power supply for TOKIT Razor Cooktop
Pro by holding the power plug firmly with a hand, to
avoid a fire caused by electric shock or short circuit.
·
Do not allow children to operate the appliance alone.
Keep it out of reach of infants and young children to avoid
electric shock, scald, and other dangerous accidents.
·
Do not insert or pull out the power plug with a wet
hand to avoid electric shock or injury.
·
Use an independent power socket with its ground wire
and at a rated current above 10 A.
·
Do not operate TOKIT Razor Cooktop Pro through an
external controller or an independent remote control
system.
·
If the power cord is damaged, it must be replaced by a
professional from the manufacturer, its maintenance
department, or similar department to avoid any danger.
Environment
·Heat will cause damage, discoloration, and deformation
to walls and furniture, so please keep the device more
than 10cm from walls and furniture during use.
·
Do not use TOKIT Razor Cooktop Pro directly on a
metal table, to avoid it against heating the metal table
and causing a danger.
·
Keep good ventilation to ensure smooth heat dissipa-
tion when using device.
·
Do not cover the vent outlet on the base of device with
plastic bags, newspapers or other sundries.
Cleaning and Daily Maintenance
·Before cleaning, make sure to disconnect the power
plug from the power socket and wait until the device
·Do not place this appliance in an unbalanced or humid
place or one close to a fire or heat source, but
preferably at a distance of 30cm or more from them.
·
Do not place this appliance near a device susceptible
to electromagnetic interference.
·
Do not use any non-professional pots/pans to prevent
TOKIT Razor Cooktop Pro from affecting its heating
performance or creating dangers.
·ONLY use pots/pans that are made of iron, flat at the
bottom, not less than 12cm or larger than the heating
zone in diameter.
·
Make sure there is "food" in the pot/pan to avoid dry
heating before starting.
·
Pay attention to preventing scald when a pot/pan with
metal handles is used.
becomes cool.
·
Do not immerse any part of the device in water or spray
water on any part of it.
·
Do not rinse the air inlet or vent outlet of the device
with water.
·
Prevent water and foreign matter from entering the device
and ensure its cleanliness.
·
Do not use a steam cleaner, steel wool or other hard
items to clean or scrub the device.
·
Use soft cloth dipped with neutral detergent to wipe off
the oil on the heating surface of the device, but NOT
use bleach solution or corrosive liquid.
·
Use soft dry cloth to wipe the air inlet and vent outlet of
the device. Use a soft brush or a micro vacuum cleaner
to clean dust on the device.
·
Use soft dry cloth to clean the device after cleaning to
ensure it is dry.
·
When not using the device for a long time, disconnect
the power plug from the power socket and also protect
it from moisture, dust and insects.
