Tomahawk JXPT36K Bedienungsanleitung

YEAR

Kohler Engine

HOW TO VIDEOS, MANUALS,

FINISHING GUIDES, & MORE

JXPT36K and JXPT46K

POWER TROWEL Operation Manual

TABLE OF CONTENTS

1. Safety Information

2. General Information

3. Technical Data

4. Quick Start Guide

5. Controls and Components

6. Engine

7. Pre-Inspection

8. Initial Start Up

9. Starting the Engine

10. Stopping the Engine

11. Operation

12. Accessory Options

13. Maintenance

14. Training Checklist

15. Parts List

16. Catalog and Coupon

Thank you for purchasing TOMAHAWK equipment! Your product is covered by the

TOMAHAWK Warranty policy, but in order to activate your warranty, we need you to register

your product. In addition to activating your equipment warranty, product registration will

grant you access to important product updates, streamlined customer service and more.

INCLUDED WITH YOUR REGISTRATION

☑ Equipment Warranty Activation

☑ Product Updates

☑ Streamlined Customer Service

☑ Excusive Discounts and Sales

STEPS TO REGISTER YOUR EQUIPMENT

1. Visit www.tomahawk-power.com

2. Choose “Product Registration” at the bottom of the page

3. Enter your equipment’s serial number to get started

4. Provide all required information

5. Submit Registration

Equipment Resources

Tomahawk Customer Service doesn’t stop at checkout. We understand to keep a job-site

running smoothly - the proper equipment, spare parts, instruction manuals, and more are

needed at the drop of a hat. Visit www.tomahawk-power.com to gain access to the incredible

resources below.

How To Video Library

More of a visual person? Visit our Video Library for equipment

assembly instructions, troubleshooting tips, and more!

Found on each product listing or the Service Videos Page

Manual and Assembly Guide Library

Visit our Manual Library if you are looking for a lost

operations manual or a particular spare part?

Found on each product listing or the Tomahawk Manuals Page

Service Requests

In need of a quick fix or a service center referral? Submit a

Service Request and a Tomahawk Technician will respond

shortly to get you the help you need.

Choose “Service Request” at the bottom of www.tomahawk-power.com

This manual provides information and procedures to safely operate and maintain this

equipment. For your own safety and protection from injury, carefully read, understand and

observe the safety instructions described in this manual.

Keep this manual or a copy of it with the equipment. If you lose this manual or need an

additional copy, please contact Tomahawk Power LLC or visit www.tomahawk-power.com

This equipment is built with user safety in mind; however, it can present hazards if

improperly operated and serviced. Follow operating instructions carefully. If you have

questions about operating or servicing this equipment, contact Tomahawk Power.

The information contained in this manual is based on equipment’s production at the time of

publication. Tomahawk Power reserves the right to change any portion of this information

without notice.

No part of this publication may be reproduced in any form or by any means, electronic or

mechanical, including photocopying, without express written permission from

Tomahawk Power.

Any type of reproduction or distribution not authorized by Tomahawk Power represents an

infringement of valid copyrights and will be prosecuted. We expressly reserve the right to

make technical modifications, even without due notice, which aim at improving our

machines or their safety standards.

1. SAFETY INFORMATION

This manual contains DANGER, WARNING, CAUTION, and NOTE callouts which must be

followed to reduce the possibility of personal injury, damage to the equipment, or improp-

er service.

This is the safety alert symbol. It is used to alert you to potential personal injury

hazards. Obey all safety messages that follow this symbol to avoid possible injury

or death.

DANGER indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

DANGER

WARNING

CAUTION

CAUTION: Used without the safety alert symbol, CAUTION indicates a potentially

hazardous situation which, if not avoided, may result in property damage.

1.1 Laws Pertaining to Spark Arresters

Notice: State Health Safety Codes and Public Resources Codes specify that in certain

locations spark arresters be used on internal combustion engines that use hydrocarbon

fuels. A spark arrester is a device designed to prevent accidental discharge of sparks or

flames from the engine exhaust. Spark arresters are qualified and rated by the United

States Forest Service for this purpose.

In order to comply with local laws regarding spark arresters, consult the engine distributor

or the local Health and Safety Administrator.

1.2 Operating Safety

Familiarity and proper training are required for the safe operation of equipment!

Equipment operated improperly or by untrained personnel can be dangerous! Read

the operating instructions contained in both this manual and the engine manual and

familiarize yourself with the location and proper use of all controls. Inexperienced

operators should receive instruction from someone familiar with the equipment before

being allowed to operate the machine.

1.2.1 NEVER allow anyone to operate this equipment without proper training. People

operating this equipment must be familiar with the risks and hazards associated with it.

1.2.2 NEVER touch the engine or muﬀler while the engine is on or immediately aer it has

been turned oﬀ. These areas get hot and may cause burns.

1.2.3 NEVER use accessories or attachments that are not recommended by Tomahawk

Power. Damage to equipment and injury to the user may result.

1.2.4 NEVER leave machine running unattended.

1.2.5 ALWAYS be sure operator is familiar with proper safety precautions and operation

techniques before using machine.

1.2.6 ALWAYS wear ANSI Z87.1-approved safety goggles or safety glasses with side shields,

or when needed, a face shield. Use a dust mask in dusty work conditions. Also use non-skid

safety shoes, hardhat, gloves, dust collection systems, and hearing protection when

appropriate. This applies to all persons in the work area.

1.2.7 ALWAYS close fuel valve on engines equipped with one when machine is not being

operated.

1.2.8 ALWAYS store equipment properly when it is not being used. Equipment should be

stored in a clean, dry location out of the reach of children.

WARNING

1.2.9 ALWAYS operate machine with all safety devices and guards in place and in working

order. DO NOT modify or remove safety devices. DO NOT operate machine if any safety

devices or guards are missing or inoperative.

1.2.10 ALWAYS read, understand, and follow procedures in Operator's Manual before

attempting to operate equipment.

1.3 Safety while using Combustion Engines

Internal combustion engines present special hazards during operation and fueling!

Read and follow warning instructions in engine owner's manual and safety guidelines

below. Failure to follow warnings and DANGER safety guidelines could result in severe

injury or death.

1.3.1 DO NOT run machine indoors or in an enclosed area such as a deep trenches unless

there is adequate ventilation, through such items as exhaust fans or hoses are provided.

Gasoline exhaust from the engine contains poisonous carbon monoxide gas; exposure to

carbon monoxide can cause loss of consciousness and may lead to death.

1.3.2 DO NOT smoke while operating machine.

1.3.3 DO NOT smoke when refueling engine.

1.3.4 DO NOT refuel hot or running engine.

1.3.5 DO NOT refuel engine near open flame.

1.3.6 DO NOT spill fuel when refueling engine.

1.3.7 DO NOT run engine near open flames.

1.3.8 ALWAYS refill fuel tank in well-ventilated area.

1.3.9 ALWAYS replace fuel tank cap aer refueling.

1.3.10 ALWAYS check fuel lines and fuel tank for leaks and cracks before starting engine.

1.3.11 DO NOT run machine if fuel leaks are present or fuel lines are loose.

1.4 Service Safety

Poorly maintained equipment can become a safety hazard! In order for the

equipment to operate safely and properly over a long period of time, periodic

maintenance and occasional repairs are necessary.

1.4.1 DO NOT attempt to clean or service machine while it is running. Rotating parts can

cause severe injury.

1.4.2 DO NOT crank a flooded engine with the spark plug removed on gasoline-powered

engines. Fuel trapped in the cylinder will squirt out the spark plug opening.

DANGER

WARNING

1.4.3 DO NOT test for spark on gasoline-powered engines, if engine is flooded or the smell

of gasoline is present. A stray spark could ignite fumes.

1.4.4 DO NOT use gasoline or other types of fuels or flammable solvents to clean parts,

especially in enclosed areas. Fumes from fuels and solvents can become explosive.

1.4.5 ALWAYS keep area around muﬀler free of debris such as leaves, paper, cartons, etc. A

hot muﬀler could ignite them, starting a fire.

1.4.6 ALWAYS replace worn or damaged components with spare parts designed and

recommended by Tomahawk Power.

1.4.7 ALWAYS disconnect spark plug on machines equipped with gasoline engines, before

servicing, to avoid accidental start-up.

1.4.8 ALWAYS keep machine clean and labels legible. Replace all missing and hard-to-read

labels. Labels provide important operating instructions and warn of dangers and hazards.

1.4.9 ALWAYS check for damaged parts before each use. Carefully check that the trowel

will operate properly and perform its intended function. Replace damaged or worn parts

immediately. Never operate the trowel with a damaged part.

1.4.10 ALWAYS inspect the screed prior to placing in storage and before re-use. Store the

trowel in a dry, secure place out of the reach of children when not in use.

1.4.11 ALWAYS use only accessories that are recommended by the manufacturer for use

with the trowel . Accessories that may be suitable for one trowel may create a risk of injury

when used with the screed equipment.

1.4.12 ALWAYS keep blades clean when not in use and guards in place and in working

order.

2. GENERAL INFORMATION

2.1 Intended Use

Leave laborious hand-finishing tasks in the past with the Tomahawk Power Trowels!

Densify concrete floors with ease for your ideal finishing results on projects including

driveways, basements, and commercial/industrial jobs.

2.2 Trowel Familiarization

Tomahawk Power Trowels are designed for the floating and finishing of concrete slabs.

Analyze your trowel and take notice of each component: the engine, blades, quick pitch

control, air cleaner, centrifugal stop switch, clutch and pulley system. Be sure that there is

always oil in the engine.

2.3 Safety

Before using your power trowel, read all of the safety instructions carefully. Safety

instructions are available throughout this manual and on the equipment. Safety

information should remain in good, readable condition. Operators must be well trained on

the operations and maintenance of the trowel.

Before starting, test the trowel on a flat, watered down section of finished concrete. Test on

a section that is free of any debris and other objects.

The trial test run will increase operator confidence, while helping familiarize yourself with

the trowel’s controls. In addition, this will help operators understand how the power trowel

functions under real conditions.

2.4 Engine

Tomahawk Power Trowels are powered by Honda and Kohler Engines. Refer to the engine

owner’s manual for instructions regarding the operation and maintenance of your engine.

The engine manual is included with your trowel. For further assistance or to receive a new

manual, contact Tomahawk Power customer service at (866) 577-4476 or refer to the

Manuals Page on the Tomahawk Power website.

2.5 Drive System

The power is transferred from the engine to the gearbox input sha via a V-belt pulley drive

system. The pulley engages using either a centrifugal or manual clutch. Refer to the Parts

section of this manual for more information.

2.6 Gearbox

The gearbox is located beneath the engine and transfers power to the rotor or spiderbox

assembly. The gearbox controls the rotational speed of the trowel and is equipped with two

shas (input and output).

2.7 Spiderbox

The vertical output sha of the gearbox connects to a cast hub called the spiderbox. The

spiderbox has 4 arms that extend outward that are used for attachment of blades or other

accessories. Remember: when the gearbox output sha rotates, so does the spiderbox

assembly.

2.8 Guard Ring

Some units are equipped with a special rotating guard ring. It is designed to allow the

operator to run the machine alongside walls, pipes, and obstructions without marring the

surface.

2.9 Blades

The blades of the trowel are used to finish the concrete as they rotate around your given

surface. This trowel includes 4 combination blades (8 in./203mm wide) per rotor. They are

equally spaced in a radial pattern and attached to the vertical rotating sha by means of the

spider assembly.

2.10 Centrifugal Clutch

In the event of a trowel runaway condition (the operator releases the handle), the centrifugal

clutch will stop the engine and bring the trowel to a complete stop.

2.11 Training

For proper training education, refer to the “TRAINING CHECKLIST” section located in the

back of this manual. This checklist contains an outline for an experienced operators to

provide training to a new operator.

3. TECHNICAL DATA

2Insert the bolts and washers through the

holes in the handle bar - fasten with a nut.

4Fit the screw through the pin and fasten the

nuts on the top and bottom to keep it in place.

6Place the bolt through the base of the

handles and then fasten with a nut on the end.

1Insert the end of the handle bar column into

the base of the trowel.

3Unscrew the nut from the pin and insert the

pin through the base of the trowel.

5Fit the handle bars around the eye towards

the top of the handle bar column.

4. QUICK ASSEMBLY GUIDE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tomahawk Kelle Handbücher

Tomahawk

Tomahawk TPT36H Bedienungsanleitung

Beliebte Kelle Handbücher anderer Marken

allen

allen HP105 Anwendungshandbuch

Bartell

Bartell BM90 Bedienungsanleitung

Stone

Stone CF24E Bedienungsanleitung

allen

allen HDX750 Anwendungshandbuch

Norton

Norton MTA 36 Leitfaden

MBW

MBW F24 Bedienungsanleitung

MBW

MBW MK8-75 Bedienungsanleitung

MULTIQUIP

MULTIQUIP B Series Bedienungsanleitung

Wacker Neuson

Wacker Neuson CT 36-400E Bedienungsanleitung

MULTIQUIP

MULTIQUIP BH11C Betriebsanleitung

Atlas Copco

Atlas Copco BG 240 E Wartungs- und Serviceanleitung

MULTIQUIP

MULTIQUIP Whiteman STXD6i Bedienungsanleitung

MQ Multiquip

MQ Multiquip JS36/30H55DE Series Leitfaden

swepac

swepac TR 600P Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman HHNG5 Bedienungsanleitung

allen

allen PRO436DF Leitfaden

Wacker Neuson

Wacker Neuson CT 36 Bedienungsanleitung

Marshalltown

Marshalltown Speed Striker STRIKE45-L Bedienungsanleitung