Tomar Spider Microbar Bedienungsanleitung
IS0576-01
02.08.2012
TOMAR Electronics, Inc.
2100 W. Obispo Ave.
Gilbert, AZ 85233 USA
800.338.3133 ph
800.688.6627 fax
www.tomar.com
Instruction Manual
MICROBAR
2
Spider Microbar Wiring
Red +12Vdc
Black Ground
Orange Warning Mode 1
Blue Warning Mode 2
Orange & Blue Warning Mode 3
Red/White Alt Mode Circle Fill
Brown/White Alt Mode Circle Trail
Red/White & Brown/White All Lamps On
Brown N/A
Green Intensity Control
Programming Instructions
Entering Programming Mode:
To activate the Lstick programming mode, connect the BLACK Wire to ground then simultaneously
attach the GREEN wire and the RED wire to +12 Vdc.
Changing Warning Patterns and Flash Rates:
Six unique warning patterns can be selected by using different combinations of the ORANGE, BLUE,
BROWN/WHITE and RED/WHITE wires. See example below:
ORANGE WIRE Warning Mode 1
BLUE WIRE Warning Mode 2
ORANGE and BLUE WIRES Warning Mode 3
BROWN/WHITE WIRE Alt Mode 1*
RED/WHITE WIRE Alt Mode 2*
BROWN/WHITE and RED/WHITE WIRES Alt Mode 3*
*Alt modes will override warning modes if both are activated simultaneously.
To change the warning mode, attach the wire(s) corresponding to the mode to be changed to +12Vdc.
Tap the Red/WHITE wire to +12Vdc to advance the flash pattern. See the list of available flash patterns
below.
A unique flash rate can be assigned to each warning mode. To change the flash rates enter the
programming mode as described above. Move the green wire from +12Vdc to Ground. Tap the
BROWN/WHITE wire to +12Vdc to advance the flash rate. See the list of available flash rates below.
MICROBAR
3
Changing Alt Mode Flash Rates:
The Alt mode flash patterns are not selectable. To change the flash rates enter the programming mode
as described above. Move the green wire from +12Vdc to Ground. Tap the BROWN wire to +12Vdc to
advance the flash rate. See the list of available flash rates below.
WARNING MODE PATTERNS:
1) OFF All OFF
2) COMBINATION Pattern 5, Pattern 4, Pattern 6, Pattern 4, Repeat
3) ALL ON Lamps 1,2,3,4,5,6 simultaneously on
4) FRONT/REAR Lamps 6,1,2 Alt with Lamps 3,4,5
5) LEFT/RIGHT Lamps 5,6,2,3 Alt With 1,4
6) CORNERS ALT Lamps 4,5,6 Alternate with 1,2,3
7) BOTH CORNERS ALT Lamps 4,5,6 Alternate 1,2,3, then 2,3,4 Alternate with 5,6,1,
Repeat
8) CIRCLE (FILL) Lamps 1 to 2 to 3 to 4 to 5 to 6, repeat (FILL)
9) CIRCLE (TRAIL) Lamps 1 to 2 to 3 to 4 to 5 to 6, repeat (TRAIL)
10) SKIP Lamps 6,4,2 Alternate with 1,5,2
11) SWEEP Lamps 1, 1&2,2&3,3&4,4&5,5&6,6,6&5,5&4,4&3,3&2,2&1 repeat
(TRAIL)
ALT MODE PATTERNS:
1) Red/White Wire Alt Mode Circle Fill
2) Brown/White Wire Alt Mode Circle Trail
3) Red/Wht & Brown/Wht Wires All Lamps On
FLASH RATES:
1) SINGLE FLASH
2) DOUBLE FLASH
3) NEOBE FLASH
4) SCROLL FLASH WARNING PATTERNS
Inhaltsverzeichnis
Andere Tomar Beleuchtungsausrüstung Handbücher
Tomar
Tomar TRX-EL TORO Bedienungsanleitung
Tomar
Tomar Scorpion 970L Installationshandbuch
Tomar
Tomar 4374 Bedienungsanleitung
Tomar
Tomar 975L-5310 Bedienungsanleitung
Tomar
Tomar 4375 Bedienungsanleitung
Tomar
Tomar Inteligent LED Series Bedienungsanleitung
Tomar
Tomar Scorpion 970L Series Bedienungsanleitung
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
