Tomstar TS17 Bedienungsanleitung
English language
TS17 Smart Watch Instruction Manual
Watch Charging: When you get a new watch, please use the charging stand attached to the watch to connect to the USB interface of the computer or the 5V-2A
charger of the mobile phone charger for charging. After charging for 2 hours, the watch shows full power, and you can start to use the watch:
■How to Wear
Refer to the pictures to wear the watch correctly.
According to the comfort level, adjust the tightness of the watch strap, and the heart rate lamp should be close to the skin surface without loosening. (This is
conducive to more accurate detection of heart rate.)
Smart watch data cannot be used for medical purposes. The monitoring data is for reference only. If you need medical help, please contact a professional doctor.
Function Operation
Switch On and Off:
On: In the power off state, long press the key on the side for about 3S, and then power on and light up the screen after one vibration.
Off: In the initial interface of the watch, long press the key on the side for about 3S, and the interface shows power off.
Connection between watch and mobile phone: First of all, the mobile phone should download app “Da fit”to the mobile phone and install it. (to search and connect
the watch through Da Fit, you can’t directly search and connect the watch through Bluetooth of the mobile phone)
Mode 1: IOS, Android mobile phone users can download the QR code directly by scanning the QR code below or scan the QR code of the watch by using the mobile
browser (watch QR code path: Set - QRcode)
Da Fit
Method 2: Open the app store of mobile phone, search “Da Fit” to download and install.
Attention:
Turn on Da Fit, select to connect the watch, turn on the message reminder switch, and turn on the corresponding function switch as needed.
When uploading the custom dial or the dial in the dial market, the watch power must be more than 30%, otherwise the dial cannot be uploaded to the watch, and the
watch power is low.
Choose to upload the dial market, you need to open the data network by mobile phone.
When a new watch is used for the first time, it needs to be connected to Da Fit to synchronize time, date and data.
When the watch is connected with Da Fit, pull down the button in the initial interface of the watch. You can see the Bluetooth connection icon in the
upper left corner of the shortcut page and the lower left corner of the watch information page. If it is not connected, the icon will not be displayed.
APP 功能 APP Function
When the download is completed, there will be all kinds of permission reminders during the installation process, and all of them choose to agree. The watch and the
mobile phone should allow all the permissions obtained by the notification on the mobile phone to realize all the functions.
How to set up letter notification: mobile phone enters settings - application management, finds "Da Fit" - permission management, and opens all.
Then enter notification management - find “Da Fit”and open all permissions.
■ Interface switch
● Dial Plate Switch: Long press the dial plate interface for 3s to switch dial plates. Slide the screen left and right to switch the dial plate and click OK to switch.
Slide Up: View information, to display SMS, Wechat, QQ, WhatsApp, twitter, ins, Facebook, etc.
Right Slide:All functions can be selected from Display Function Menu..
Left Slide: Enter the shortcut function of step counting - sleep - heart rate - exercise - blood oxygen - weather.
Slide Down: The dial interface slides from top to bottom, then the interface shows Bluetooth connection, time display, battery power, no disturb mode, brightness
display, mobile phone search, timer, photo control, weather and other shortcut functions.
Watch Function
Step Count:The watch can record and display the number of steps, calories and distance consumed every day. More detailed information analysis and data records
can be viewed in Da Fit.
Sleep: The watch can record and display the total sleep duration of last night, as well as the length of deep sleep and light sleep. More detailed information analysis
and data records can be viewed in Da Fit.
Heart Rate ------ The ●watch can record and display 24-hour heart rate value all day. Click the heart rate interface to measure the current heart rate value. More
details analysis and data recording can be viewed in Da Fit.
●Exercise: There are 8 sports modes to choose from, including walking, running, cycling, basketball, football, badminton, rope skipping and swimming. More
detailed analysis and data records can be found in Da Fit..
●Main menu: Click into the main menu, you can choose to display the nine-square grid menu and the list menu.
●Blood Oxygen: Click the blood oxygen interface to measure the current blood oxygen content. Slide up to view the blood oxygen data records for nearly seven
times. More detailed information analysis and data records can be viewed in Da Fit.
●Weather Information: When the watch is connected to the mobile app, the weather condition and air quality information of the day will be displayed in the weather
interface. The weather condition of the next week can be viewed by sliding up. More detailed information analysis and data records can be viewed in Da Fit.
●Message Push: Watch can receive the notification information push on display mobile phone. The push application switch on Da Fit can be set, and watch message
page can store the latest 3 message records.
●Camera Control: After connecting Da Fit, the watch can be used as the shutter of the mobile camera, and the camera can be controlled. After opening the camera on
the mobile phone, click the screen icon in the watch camera interface to control the camera taking of your mobile phone.
●Music Control: After the watch is connected to Da Fit, the watch can control the mobile music player, to select pause and play, and to switch between the previous
and next music.
●Breathing Training: Click the watch interface function. The watch will conduct 8 cycles to train your respiratory capacity.
●Alarm Clock: The intelligent alarm clock of watch can be set on Da Fit, and up to 3 alarm clocks can be set. At the setting time, the watch will display the alarm
clock icon and vibrate.
●Countdown: 1 minute, 3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 1 hour, and 2 hours countdown can be set.
●Stopwatch: Click the function to use the stopwatch function, which can record the time when you are in motion or need.
●Flashlight: Click the function icon, the display screen will be all bright and white.
●Search the Mobile Phone: Connect the watch to Da Fit, and when you click the watch interface. The mobile phone will vibrate and make a sound.
●Other Functions: Set the display brightness of the watch, Vibration Switch, NO Disturb Mode, Theater Mode, and the Dial Plate Switch. Switch the watch function
menu before the nine palace and list, restore the factory settings of the watch, shut down the watch, Download Da Fit app with QR code, and “about”view the
Bluetooth address, software version number and watch model.
●Theatre Model
When theater mode is turned on, the watch vibration is turned off and the screen brightness is reduced.
●Long Sitting Reminder:
Turn on the long sitting reminder switch on the Da Fit setting. The watch will remind you to get up for a walk after you sit for an hour.
Inhaltsverzeichnis
Andere Tomstar Betrachten Handbücher
