Topcon GX-45 Bedienungsanleitung
GX-45 Console
SGR-1 Quick Setup Guide
Part Number AGA4117 Rev. 1.1
SGR-1 Antenna Software Setup
This quick setup guide is to be used in
conjunction with the System 110/150
Operator’s Manual P/N AGA3663
GX-45 Console SGR-1 Quick Setup Guide AGA4117 Rev 1.1
Select the GPS Correction
Select to access the GPS Settings screen.1.
Select to access GPS Correction selection.2.
Use the up and down arrows to select the correction system.3.
Select to confirm your selection.4.
Refer to the AGA3663 System 110/150 Operator’s manual
for more information on setting up the different correction
systems.
www.topconpa.com www.topconpa.com
SGR-1 to GX-45 Installation Procedure Select the GPS Receiver
SGR-1 Antenna Software SetupSGR-1 Installation Procedure
Mount the SGR-1 antenna along the center line on the roof1.
of your tractor.
The SGR-1 antenna has 3 magnets on its base to secure its
position. A metal mounting plate is supplied to secure the
antenna to cabin tops that are non-magnetic.
Connect the AGH1368 harness to the SGR-1 antenna.2.
Route the AGH1368 harness into the cabin through the rear3.
window of your tractor.
Connect the AGH1368 harness to your GX-45 console.4.
Select to access GPS Settings.1.
Select to access GPS Receiver selection.2.
Select SGR-1 using the up and down arrows.3.
Select to confirm your selection and the system will4.
restart.
www.topconpa.com www.topconpa.com
SGR-1 to GX-45 Installation Procedure Select the GPS Receiver
SGR-1 Antenna Software SetupSGR-1 Installation Procedure
Mount the SGR-1 antenna along the center line on the roof1.
of your tractor.
The SGR-1 antenna has 3 magnets on its base to secure its
position. A metal mounting plate is supplied to secure the
antenna to cabin tops that are non-magnetic.
Connect the AGH1368 harness to the SGR-1 antenna.2.
Route the AGH1368 harness into the cabin through the rear3.
window of your tractor.
Connect the AGH1368 harness to your GX-45 console.4.
Select to access GPS Settings.1.
Select to access GPS Receiver selection.2.
Select SGR-1 using the up and down arrows.3.
Select to confirm your selection and the system will4.
restart.
GX-45 Console
SGR-1 Quick Setup Guide
Part Number AGA4117 Rev. 1.1
SGR-1 Antenna Software Setup
This quick setup guide is to be used in
conjunction with the System 110/150
Operator’s Manual P/N AGA3663
GX-45 Console SGR-1 Quick Setup Guide AGA4117 Rev 1.1
Select the GPS Correction
Select to access the GPS Settings screen.1.
Select to access GPS Correction selection.2.
Use the up and down arrows to select the correction system.3.
Select to confirm your selection.4.
Refer to the AGA3663 System 110/150 Operator’s manual
for more information on setting up the different correction
systems.
Inhaltsverzeichnis
Andere Topcon Antenne Handbücher
Beliebte Antenne Handbücher anderer Marken
Alfa Network
Alfa Network APA-L01 Bedienungsanleitung
Naval
Naval PR-422CA Bedienungsanleitung
Feig Electronic
Feig Electronic ID ISC.ANTH200/200 Series Bedienungsanleitung
TERK Technologies
TERK Technologies TV44 Bedienungsanleitung
Directive Systems & Engineering
Directive Systems & Engineering DSE2324LYRMK Bedienungsanleitung
HP
HP J8999A Bedienungsanleitung
CommScope
CommScope CMAX-OMFX-43M-I53 Bedienungsanleitung
Ramsey Electronics
Ramsey Electronics DAP25 Bedienungsanleitung
COBHAM
COBHAM SAILOR 800 VSAT Gebrauchs- und Pflegehandbuch
Trango Systems
Trango Systems AD900-9 Bedienungsanleitung
Steren
Steren ANT-100 Bedienungsanleitung
Proxim
Proxim 5054-PA-23 Bedienungsanleitung