3
SAFETY CAUTIONS
WARNING
Icons Prevention item Page
Do not break down, modify or repair the equipment.
Doing so can cause electric shock. Request a repair from
your dealer. 20
To prevent an electric shock hazard, do not allow water or
other foreign matter to enter into the instrument. --
To avoid fire and electric shock in the case of tumbling, do
not place a cup or vessel containing water/fluid on the
instrument. --
To avoid electric shock, do not insert objects or metals
through the vent holes or gaps or place them inside the
machine body. --
Connect the power plug to a three-prong properly grounded
AC socket with an earth. If it is connected to a socket that is
not grounded, it can cause a fire and electric shock due to
leakage. 11
Unplug the power cable before removing the fuse cover to
replace the fuse. Removing the fuse cover with the power
cable plugged in can cause electric shock. Do not install the
power cord on the body with the fuse cover removed. 25
Use only attached fuses (For 100, 120V range: T-1.6A, 250V
For 220, 230, 240V range: T-1A, 250V). Using other fuses may
cause a fire in the event that the instrument fails. 25
Should any anomaly, such as smoke, occur, immediately
switch OFF the power source and unplug the power cable.
Continued use while ignoring the condition may cause a
fire. Contact your dealer for repair. --
