Topcon PC-CDU Bedienungsanleitung

PC-CDU

User’s Manual

Reflects PC-CDU Version 2.1.10 MS (Build: pril 1, 2002)

Last Updated: ugust 6, 2002

ll rights reserved

INTRODUCTION / TERMS AND CONDITIONS

Thank you for purchasing your Topcon receiver. The materials available in this Manual (the "Manual") have

been prepared by Topcon Positioning Systems, Inc. (“TPS”) for owners of Topcon products. It is designed

to assist owners with the use of PC-CDU software (which may be used with the Topcon receiver) and its use

is subject to these terms and conditions (the “Terms and Conditions”).

PLEASE READ THESE TERMS AND CONDITIONS CAREFULLY.

PROFESSIONAL USE. Topcon receivers are designed to be used by a professional. The user is required to

be a professional surveyor or have a good knowledge of surveying, in order to understand the user and

safety instructions before operating, inspecting or adjusting. Always wear the required protectors (safety

shoes, helmet, etc.) when operating the receiver.

rial of TPS. All rights are reserved. One may not use, access, copy, store, display, create derivative works

of, sell, modify, publish, distribute, or allow any third party access to, any graphics, content, information or

data in this Manual without the express written consent of TPS and may only use such information for the

care and operation of your Receiver. The information and data in this Manual are a valuable asset of TPS

and are developed by the expenditure of considerable work, time and money, and are the result of original

selection, coordination and arrangement of TPS.

TRADEMARKS. Topcon® is a registered trademark of Topcon Corporation. Windows® is a registered

trademark of Microsoft Corporation. WinZip® is a registered trademark of Nico Mak Computing, Inc. Prod-

uct and company names mentioned herein may be trademarks of their respective owners.

DISCLAIMER OF WARRANTY: EXCEPT FOR ANY WARRANTIES IN A WARRANTY CARD ACCOMPANYING

THE RECEIVER, THIS MANUAL AND THE RECEIVER ARE PROVIDED “AS-IS.” THERE ARE NO OTHER WAR-

RANTIES. TPS DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PAR-

TICULAR USE OR PURPOSE. TPS AND ITS DISTRIBUTORS SHALL NOT BE LIABLE FOR TECHNICAL OR

EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE OR USE OF THIS MATERIAL, THE SOFT-

WARE OR THE RECEIVER. SUCH DISCLAIMED DAMAGES INCLUDE BUT ARE NOT LIMITED TO LOSS OF

TIME, LOSS OR DESTRUCTION OF DATA, LOSS OF PROFIT, SAVINGS OR REVENUE, OR LOSS OF THE

PRODUCT’S USE. IN ADDITION TPS IS NOT RESPONSIBLE OR LIABLE FOR DAMAGES OR COSTS IN-

CURRED IN CONNECTION WITH OBTAINING SUBSTITUTE PRODUCTS OR SOFTWARE, CLAIMS BY OTH-

ERS, INCONVENIENCE, OR ANY OTHER COSTS. IN ANY EVENT, TPS SHALL HAVE NO LIABILITY FOR

DAMAGES OR OTHERWISE TO YOU OR ANY OTHER PERSON OR ENTITY IN EXCESS OF THE PURCHASE

PRICE FOR THE RECEIVER.

LICENSE AGREEMENT.Use of the PC-CDU Software and any other computer programs or software supplied

by TPS or downloaded from a TPS website (the “Software”) in connection with a Topcon receiver consti-

tutes acceptance of these Terms and Conditions in this Manual and an agreement to abide by these Terms

and Conditions. The user is granted a personal, non-exclusive, non-transferable license to use such Soft-

ware under the terms stated herein and in any case only with a single receiver or single computer. You

may make one (1) backup copy of the Software. Otherwise, the Software may not be copied or repro-

duced. You may not assign or transfer the Software or this license without the express written consent of

TPS. This license is effective until terminated. You may terminate the license at any time by destroying the

Software and Manual. TPS may terminate the license if you fail to comply with any of the Terms or Condi-

tions. You agree to destroy the Software and manual upon termination of your use of the receiver. All

ownership, copyright and other intellectual property rights in and to the Software belong to TPS. If these li-

cense terms are not acceptable, return any unused Software and manual.

CONFIDENTIALITY. This Manual, its contents and the Software (collectively, the “Confidential Informa-

tion”) are the confidential and proprietary information of TPS. You agree to treat Confidential Information of

TPS with a degree of care no less stringent that the degree of care you would use in safeguarding your own

most valuable trade secrets. Nothing in this paragraph shall restrict you from disclosing Confidential Informa-

tion to your employees as may be necessary or appropriate to operate or care for the receiver. Such employ-

ees must also keep the Confidential Information confidential. In the event you become legally compelled to

disclose any of the Confidential Information, you shall give TPS immediate notice so that it may seek a protec-

tive order or other appropriate remedy.

iii

WEBSITE; OTHER STATEMENTS. No statement contained at the TPS website (or any other website) or

in any other advertisements or TPS literature or made by an employee or independent contractor of TPS

modifies these Terms and Conditions (including the Software license, warranty and limitation of liability).

SAFETY. Improper use of a Topcon receiver can lead to injury to persons or property and/or malfunction of

the product. The receiver should only be repaired by authorized TPS warranty service centers. Users

should review and heed the safety warnings in the manual accompanying the receiver.

MISCELLANEOUS. The above Terms and Conditions may be amended, modified, superseded, or canceled,

at any time by TPS. The above Terms and Conditions will be governed by, and construed in accordance

with, the laws of the State of California, without reference to conflict of laws.

Contents

1. PC-CDU SOFTWARE ........................................................................................................................1

1.1. PC-CDU’s purposes and functions...............................................................................................1

1.2. Typographic conventions...........................................................................................................2

1.3. Terminology and notation..........................................................................................................3

1.4. What information can be found in this document? .......................................................................4

1.5. System requirements ................................................................................................................4

1.6. Full- and limited-functionality versions of PC-CDU........................................................................4

1.7. Technical Support.....................................................................................................................5

2. SETTING UP PC-CDU .......................................................................................................................6

2.1. Installing PC-CDU .....................................................................................................................6

2.2. Removing PC-CDU ....................................................................................................................8

3. STARTING PC-CDU .........................................................................................................................9

3.1. How to start up PC-CDU............................................................................................................9

3.1.1. Direct Mode.....................................................................................................................10

3.1.2. ‘Internet Server’ Mode ...................................................................................................... 11

3.1.3. ‘Internet Client’ Mode .......................................................................................................13

3.2. How to close PC-CDU.............................................................................................................. 14

4. LEARNING PC-CDU IN DETAIL .......................................................................................................... 16

4.1. Main window..........................................................................................................................16

4.1.1. Geo tab...........................................................................................................................18

4.1.2. XYZ tab...........................................................................................................................20

4.1.3. Target tab ....................................................................................................................... 20

4.2. The Main window’s menu ........................................................................................................ 21

4.2.1. ‘File Manager’ window ...................................................................................................... 21

4.2.1.1. Download files........................................................................................................... 22

4.2.1.2. The ‘Current log file’ tab.............................................................................................25

4.2.1.3. ‘Download path’ tab................................................................................................... 27

4.2.2. ‘Real-Time Logging’ dialog window ....................................................................................27

4.2.2.1. ‘Single file’ tab........................................................................................................... 28

4.2.2.2. ‘Multiple files’ tab....................................................................................................... 29

4.2.3. ‘Manual Mode’ window...................................................................................................... 33

4.2.4. ‘Receiver Configuration’ window ........................................................................................34

4.2.4.1. General..................................................................................................................... 35

4.2.4.2. MINTER....................................................................................................................39

4.2.4.3. Positioning ................................................................................................................42

4.2.4.4. Base......................................................................................................................... 47

4.2.4.5. Rover .......................................................................................................................50

4.2.4.6. Ports ........................................................................................................................54

4.2.4.7. Events ......................................................................................................................57

4.2.4.8. Advanced.................................................................................................................. 59

4.2.5. Site Configuration window ................................................................................................66

4.2.6. Target Position window ....................................................................................................66

4.2.7. RFM96 Configuration window ............................................................................................67

4.2.8. Initialize file system..........................................................................................................69

4.2.9. Clear NVRAM ...................................................................................................................70

4.2.10. Reset receiver ..............................................................................................................70

4.2.11. Option Manager window................................................................................................ 71

4.2.12. Scatter window............................................................................................................. 72

4.2.13. Satellites window ..........................................................................................................74

4.2.14. Position window............................................................................................................ 75

4.2.15. Plots Configuration window............................................................................................ 76

4.2.16. About PC-CDU ..............................................................................................................77

APPENDIX A. PC-CDU SCRIPTS ..................................................................................................................79

Introduction to PC-CDU scripts ..........................................................................................................79

Variables .........................................................................................................................................80

PC-CDU commands...........................................................................................................................80

Receiver commands..........................................................................................................................82

Running scripts from Windows Explorer..............................................................................................83

APPENDIX B. OUTPUT PERIOD SETUP WIZARD ................................................................................................ 84

APPENDIX C. CHANNEL NAVIGATION STATUS CODES ......................................................................................... 87

List of Figures

Figure 1. Dialog box “Enter Network Password” ................................................................................6

Figure 2. Dialog box “File Download”.......................................................................................................7

Figure 3. Select a destination for the archive pccdu_ms.zip ..........................................................................7

Figure 4. Copying data from the website to your computer’s disk drive.......................................................8

Figure 5. “Connection Parameters” dialog ..............................................................................................10

Figure 6. “Connection Parameters” window in Internet Server mode ........................................................12

Figure 7. “Connection Parameters” window in Interne t Client mode ...................................................14

Figure 8. “Chat” window.......................................................................................................................14

Figure 9. Main window .........................................................................................................................16

Figure 10. “Geo” tab ............................................................................................................................18

Figure 11. “XYZ” tab ............................................................................................................................20

Figure 12. “Target” tab ........................................................................................................................20

Figure 13. The Main window’s menu......................................................................................................21

Figure 14. “Download files” tab.............................................................................................................22

Figure 15. Message notifying that a file with the same name already exists ..............................................23

Figure 16. Message notifying that a problem occurred while retrieving the current block of data from the

receiver........................................................................................................................................23

Figure 17. “Current log file” tab.............................................................................................................25

Figure 18. “Site Configuration” dialog box ..............................................................................................26

Figure 19. “Download path” tab ............................................................................................................27

Figure 20. “Real-Time Logging” dialog window .......................................................................................28

Figure 21. “Multiple files” tab ................................................................................................................29

Figure 22. Generation of multiple files ...................................................................................................30

Figure 23. “Overwrite existing files?” warning........................................................................................31

Figure 24. “Converter to RINEX Setup” window ......................................................................................32

Figure 25. “Manual Mode” window ........................................................................................................33

Figure 26. “General” tab.......................................................................................................................35

Figure 27. “MINTER” tab ......................................................................................................................39

Figure 28. “Positioning” tab ..................................................................................................................42

Figure 29. “<DATUM ID> Datum Parameters” window ...........................................................................43

Figure 30. “GPS” tab.........................................................................................................................45

Figure 31. “GLONASS” tab ....................................................................................................................45

Figure 32. “WAAS” tab .........................................................................................................................46

Figure 33. “Base” tab ...........................................................................................................................47

Figure 34. “Rover” tab..........................................................................................................................50

Figure 35. “Ports” tab...........................................................................................................................54

Figure 36. “Parallel” subtab ..................................................................................................................56

Figure 37. “Modem” subtab ..................................................................................................................56

Figure 38. “Events” tab ........................................................................................................................57

Figure 39. “Advanced” subtab...............................................................................................................59

Figure 40. “Multipath Reduction” tab .....................................................................................................60

Figure 41. “Loops Management” subtab.................................................................................................61

Figure 42. “External Frequency” subtab .................................................................................................62

Figure 43. “Raw Data Management” subtab ...........................................................................................64

Figure 44. “Options” subtab..................................................................................................................66

Figure 45. “Target Position” window......................................................................................................66

Figure 46. RFM96 item .........................................................................................................................67

Figure 47. “Connect” tab ......................................................................................................................67

Figure 48. Operations the user should take in Power cycle mode .............................................................68

Figure 49. “Configuration” tab. PDL configuration settings....................................................................... 68

Figure 50. “Configuration” tab. Recommended settings. ..........................................................................69

Figure 51. “Initialize File System?” warning ............................................................................................69

vii

Figure 52. “Reset receiver?” warning ..................................................................................................... 70

Figure 53. “Option Manager” window .................................................................................................... 71

Figure 54. “Scatter” window .................................................................................................................72

Figure 55. “Satellites” window...............................................................................................................74

Figure 56. Pop-up menu, reflecting the information about the selected satellite......................................... 75

Figure 57. “Position” window ................................................................................................................ 75

Figure 58. “Plots Configuration” window ................................................................................................ 76

Figure 59. “About PC-CDU” window.......................................................................................................77

Figure 60. Wizard’s 1st window.............................................................................................................84

Figure 61. Wizard’s 2nd window............................................................................................................85

Figure 62. Wizard’s 3rd window ............................................................................................................ 85

Figure 63. Wizard’s 4th window ............................................................................................................ 86

Figure 64. Wizard’s 5th window ............................................................................................................ 86

viii

List of abbreviations, acronyms and other notation used in

this manual

ARP – Antenna Reference Point

CMR – A format used to transmit differential corrections and related data from the Base receiver to

the Rover receiver in DGPS and RTK applications

C/A – Coarse Acquisition code

DGPS – Differential GPS

DLL – Delay Lock Loop

DNS – Domain Name System

GUI – Graphical User Interface

IP – Internet protocol

LO – Local Oscillator

MINTER – Minimum INTERface. A dedicated user interface designed for TPS receivers

NS – Navigation Satellite

P – Precise code

PC – Personal Computer

PLL – (Carrier) Phase Lock Loop

PLLC – (Carrier) Phase Lock Loop Control

PS – Pseudorandom Sequence

Receiver – Satellite Navigation User Receiver developed and manufactured by TPS

RMS – Root-mean-square

RNSS – Radio Navigational Satellite System

RTCM – (Radio Technical Commission for Maritime Services). This format is used to transmit

differential corrections and related data from the Base receiver to the Rover receiver in DGPS and

RTK applications

RTK – Real-time kinematic

SW – software

VCO – Voltage Control Oscillator

1. PC-CDU software

1.1. PC-CDU’s purposes and functions

PC-CDU is a windows application for controlling radio navigation receivers developed and manufac-

tured by the Topcon Positioning Systems company.

The most current version of PC-CDU MS (as of 2.1.10, April 1, 2002) provides the following func-

tions:

• Connects a PC to a TPS receiver via the computer’s serial or parallel ports (

Direct Con-

nection Mode

• Configures a TPS receiver as an “Internet Server”. To do this, the user must run PC-

CDU in

Internet Server Mode

• Connects a PC to a TPS receiver that has been configured and is being run in

Server

Mode

via the Internet. In this case the user must run his/her PC-CDU in

Internet Client

Mode

• Keeps track of the total number and the status of all visible satellites.

• Displays the receiver’s current position and time in real time.

• Controls the recording of raw data measurements into the receiver’s internal memory.

• Downloads collected raw data measurements (log files) from the receiver’s internal

memory onto the computer’s disk drives.

• Records, in real time, the receiver’s raw data measurements on the computer’s disk in

JPS and RINEX formats (using the executable file jps2rin.exe).

• Displays, in real time, the graph of the receiver’s current position and the satellite sky

plot.

• Allows displaying and programming the receiver’s main settings (such as

Data Re-

cording Interval

Position Computation Mode

, etc.).

• Allows display of the current receiver options and loading of

Option Authorization Files

1.2. Typographic conventions

Table 1 specifies all typographic conventions used in this manual.

Table 1. Document conventions

Example Description

Clock offset

This format is used in definitions or when it is

necessary to emphasize that the marked term

is technical jargon.

Select from the File… menu Titles of dialog windows/boxes, names of menu

options and other GUI components.

Press CTRL+V This format is used to specify keys and key

combinations.

Type the string 194.85.135.59. This format is used to enter various string in-

formation (e.g., file and directory names) as

well as user commands.

To clear the NVRAM:

1. Select the option Clear NVRAM from

the Tools menu…

This format is used to describe the sequence of

steps that the user must take.

Note…

The user is recommended to take note of the

given information.

Some good hints…

These hints and tips will help the user learn the

program faster.

Caution! By no means use…

The user is warned about possible errors.

Inhaltsverzeichnis

Andere Topcon Software Handbücher

Topcon

Topcon GR-3 Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung