©2022 Topxgun (Nanjing) Robotics Co., Ltd. Copyright owner 3
4. Operation
Keep away from the rotating propellers and motors.
When folding the drone, avoid crushing and damaging the drone parts.
Do not exceed the take-off weight of 78.8Kg to avoid danger.
Pilots must be professionally trained and pass the assessment, and the
untrained personnel must not fly the drone.
Make sure that the propellers are removed before calibrating the drone
and upgrading the firmware.
When the drone and the remote controller are in the frequency-connecting
process, make sure that the propellers are removed and that people and
animals are far away from the motor.
A pilot should not operate this product under the influence of alcohol,
fatigue, illness, etc.
If the operating environment does not meet the working condition of the
radar module, the drone will not avoid obstacles when it returns
automatically. If the remote-control signal is normal, the flight speed and
altitude can be controlled using the remote controller.
When working, be sure to turn on the remote controller first, and then turn
on the power supply. After landing, turn off the power supply first and then
turn off the remote controller.
Please maintain control of the drone throughout the process and do not
rely entirely on the information provided by the hand-held ground
station(remote controller).
Obstacle avoidance and terrain following functions will not be available in
the specific flight mode or environment. Please observe the attitude of the
drone at all times and judge the flight condition reasonably to avoid
obstacles in time.
5. Flight Restrictions and Local Laws
Browse the official website of the Aviation Authority of your location for the
latest list of restricted flight areas.
The maximum control flight altitude is 20 meters. Please consult the local
flight management department before taking off, to comply with local laws
and regulations.
Special precautions: Safety operating instruction notes include but are not
limited to the above items.
Intellectual Property Rights
The intellectual property rights of this product and its manual belong to
Topxgun Robotics Co., Ltd. Without written permission, any organization or
individual may not copy, reproduce or distribute them in any form. If the
quotation is required, the source should be indicated and the manual should
not be modified, deleted or quoted contrary to its original intention.
