Tork Elevation H2 Xpress Bauanleitung

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

1 of 8

Tork Elevation H2 Xpress Interfold Towel

Dispenser (360 capacity):

H2 Xpress System: 552020 (white)

H2 Xpress System: 552028 (black)

Dispenser Dimensions HxWxD Inches (cm):

17.5 x 11.9 x 4.0 (44.4x 30.2 x 10.1 cm)

H2 Xpress Towel Product Options:

100297 (Tork Premium, 4 Panel)

101290 (Tork Advanced, 4 Panel)

101291 (Tork Advanced, 3 Panel)

Parts

Part Description Replacement SKU

Part Description with Replacement Instructions

Parts with SKUs listed are available for order as of the revision date on the manual. Contact an SCA

Sales Representative or the SCA Tissue Quality Coordinator to order these parts.

If no SKU is listed, the availability of the part is unknown. Please contact the SCA Tissue Quality

Coordinator for more information (see Contacting SCA section).

Replacement SKU Description & Replacement Instructions

225520A

225521A

H2 ELEVATION HOOD (White or Black)

The hood for the 552020 or 552028 can be removed without any tools. Open the

cover. Start at the bottom hinge. Push hinge pivot on cover up to disengage from

back. Once bottom hinge is free, top hinge can then be pushed over rib and cover

can be removed.

205502

205503

ELEVATION LOCK (White or Black)

The lock can be replaced by pressing the plastic tabs on each side to free the lock

from the opening. A new lock can be snapped in place.

200260 KEY SCA 200260 KEY FOR ALL TORK DISPENSERS

H2 ELEV HOOD (White) 225520A

H2 ELEV HOOD (Black) 225521A

ELEVATION LOCK

(White)

205502

ELEVATION LOCK

(Black)

205503

200260 KEY FOR ALL

TORK DISPENSERS

200260 KEY

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

2 of 8

Mounting and Filling Instructions

Installation instruction sheet and mounting template are provided inside each carton.

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

3 of 8

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

4 of 8

Preventive Maintenance

The dispenser should be cleaned any time there is heavy paper dust build-up inside the dispenser. If

paper dust is not a problem, approximately every year is a good frequency for cleanings. The following is

the recommended procedure to cleaning:

1) Open the dispenser and remove the remaining towels.

2) Clean out any paper dust. This can be done is several ways, such as, vacuuming, blowing out with a

can of compressed air (wear safety glasses), wiping out with a damp cloth, etc.

3) Clean the cover with a general all-purpose cleaner that is safe for plastics.

Troubleshooting

Problem: Any paper-related problem.

Take note of the date code on the outside of the case of paper product on inside on the TorkSelect label.

Then contact the SCA Tissue Quality Coordinator and explain the problem.

Problem: Any other problem not stated above.

•Contact the SCA Tissue Quality Coordinator.

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

5 of 8

Contacting SCA

To contact the SCA Tissue Quality Coordinator, dial 1-866-722-6659 and press 6. If asked for the date

code on the dispenser, see instructions below.

Product Date Code Location: The assembly date code for the product can be found on the TorkSelect

label affixed to the inside back of the dispenser.

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

6 of 8

552020 552028 - Tork Elevation H2 Xpress Interfold Hand Towel Dispenser

Mounting Hole Dimensions (mm)

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

7 of 8

Recommended Mounting Height (standard access)

Bottom of towel dispenser to be located 47.25” (120cm) above finished floor.

Recommended Mounting Height (ADAAG Guideline)

4.22.7 Controls and Dispensers. If controls, dispensers, receptacles, or other equipment are provided,

then at least one of each shall be on an accessible route and shall comply with 4.27.

4.27.3* Height. The highest operable part of controls, dispensers, receptacles, and other operable

equipment shall be placed within at least one of the reach ranges specified in 4.2.5 and 4.2.6.

4.2.5* Forward Reach. If the clear floor space only allows forward approach to an object, the maximum

high forward reach allowed shall be 48 in (1220 mm) (see Fig. 5(a) )

Figure 5a

High Forward Reach Limit

Washroom Dispenser Service and Parts Manual

Tork Elevation H2 Xpress Interfold Towel Dispenser

552020; 552028 Revision Date: 4-10-12

8 of 8

4.2.6* Side Reach. If the clear floor space allows parallel approach by a person in a wheelchair, the

maximum high side reach allowed shall be 54 in (1370 mm) and the low side reach shall be no less than

9 in (230 mm) above the floor (Fig. 6(a) and (b)).

Figure 6(a) Figure 6(b)

Clear Floor Space - Parallel Approach High and Low - Side Reach Limits

Under 4.4.1, the Elevation H2 Xpress dispenser can be located on any wall surface because it protrudes

4” or less. It will comply with ADAAG regulations as long as it is mounted at the appropriate height for the

approach specified above.

Inhaltsverzeichnis

Andere Tork Spender Handbücher

Tork

Tork Matic Service-Handbuch

Tork

Tork Image Design Matic 460001 Bedienungsanleitung

Tork

Tork Matic Elevation H1 Bedienungsanleitung

Tork

Tork B3 System Bauanleitung

Tork

Tork 93T Leitfaden

Tork

Tork Elevation H2 Xpress Mini Bauanleitung

Tork

Tork Tork Matik 551102 Bedienungsanleitung

Tork

Tork 654021 Bauanleitung

Tork

Tork Intuition Bedienungsanleitung

Tork

Tork Elevation T2 Mini JBT Series Bauanleitung

Tork

Tork Image Design 460013 Bedienungsanleitung

Tork

Tork Matic Bedienungsanleitung

Tork

Tork Xpressnap N4 Bedienungsanleitung

Tork

Tork TRK565828 Bedienungsanleitung

Tork

Tork S2 Bedienungsanleitung

Tork

Tork 430690 Bedienungsanleitung

Tork

Tork Express 460004 Bedienungsanleitung

Tork

Tork Essity Image Design 466000 Bedienungsanleitung

Tork

Tork S1 System Bauanleitung

Tork

Tork Image Design Matic 460001 Bedienungsanleitung

Tork

Tork Xpress 451000 Bedienungsanleitung

Tork

Tork Image Design 460010 Bedienungsanleitung

Tork

Tork H-7859 Bedienungsanleitung

Tork

Tork 99A Bauanleitung

Beliebte Spender Handbücher anderer Marken

Silver King

Silver King Majestic SK12MAJ Kurzanleitung

Franke

Franke F3Dn Twin Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Bedienungsanleitung

DAN DRYER

DAN DRYER 282 Bedienungsanleitung

Essity

Essity Tork 473208 Bedienungsanleitung

CBS

CBS SD300BU-88 Einrichtungshandbuch

Sealey

Sealey MK77 Bedienungsanleitung

Fluid Management

Fluid Management Accutinter 1600 Bedienungsanleitung

Franke

Franke DVS SD99-010 Bedienungsanleitung

Graco

Graco Dispensit 1053-10C Fehlerbehebungshandbuch

ITALTINTO

ITALTINTO i50 Bedienungsanleitung

Coca-Cola

Coca-Cola FREESTYLE 9000 Bedienungsanleitung

Graco

Graco ProMix 2KE Bedienungsanleitung

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 Bedienungsanleitung

clarsen

clarsen H133 Bedienungsanleitung

PicoBrew

PicoBrew Zymatic Bedienungsanleitung

BOWMAN

BOWMAN BP-007 Bedienungsanleitung

HURAKAN

HURAKAN HKN-MT1 Bedienungsanleitung