The GlowStep Revolution Frame can be mounted with either 3/8"
hardware through the inner holes as seen in figure 4.1, or mounted
with 5/16" hardware through the outer holes as seen in figure 4.2.
Side brackets vary by manufacturer, and may need to be trimmed to
clear the hardware protruding through the sides of the GlowStep
Revolution Frame. If the width of your camper mounting brackets is
wider than the GlowStep Revolution frame, order A8020 GlowStep
Revolution Spacer Kit to increase the mounting width of the
GlowStep Revolution.
Once installed, torque the 3/8" hardware to 25 ft-lbs, or torque the
5/16" hardware to 15 ft-lbs.
