Toro ECXTRA Sprinkler Timer Bedienungsanleitung

ECXTRA Features

• Easily expandable to 10 Zones (Indoor

model) or 12 Zones (Outdoor Model) with

2-zone Plug-in Modules

• Snap-in Wire Connectors

•Compatible with Optional Scheduling

Software Package

• 3 Independent Watering Programs with:

- Calendar, Interval and Odd/Even Days

- Selective Day Exclusion

- 1-minute to 4-hour Zone Run Time

- 4 Start Times

• Seasonal Run Time Adjust

•Rain Delay

• Compatible with Normally Closed or

Normally Open Rain Sensors

• Automatic 24 VAC Circuit Protection

•Program Memory Backup without Battery

• Programmable Pump Start

BCA

MANUAL

START

OFF

MANUAL

START

OFF

Sprinkler Timer with

Computer Programming

Option

User’s Guide

INDOOR MODEL

OUTDOOR MODEL

Notes:

Table of Contents

Timer Components........................................ 2-5

Timer Installation

  n Indoor Model Installation................................ 6

   zConnecting the Valves.................................... 7

   zConnecting a Pump Start Relay ..................... 8

   zConnecting the Transformer........................... 8

  n Outdoor Model Installation............................. 9

   zPreparing the Cabinet for Installation ............. 9

   zInstalling the Cabinet.................................... 10

   zConnecting the Valves.................................. 11

   zConnecting a Pump Start Relay ................... 12

   zConnecting the Power Source...................... 12

  n Connecting a Rain Sensor ........................... 13

Getting Started

  n Automatic Sprinkler System Basics............ 14

  n Watering Schedule Basics ........................... 15

  n Watering Program Details ....................... 16-17

  zSelecting Watering Days .............................. 16

  zSelecting Program Start Times..................... 17

  zSetting the Zone Run Time........................... 17

  n Planning Your Watering Schedule .............. 18

  zWatering Schedule Forms....................... 19-20

Programming the Timer

  n About the Watering Program Memory ........ 21

  n Setting the Current Time and Date .............. 21

  n Setting the Watering Day Schedule........ 22-24

  zSetting a Calendar Schedule........................ 22

  zSetting an Interval Schedule ........................ 23

  zSetting an Odd or Even Schedule ................ 24

  zUsing the Day Exclusion Feature ................. 25

  n Turning Off a Program.................................. 26

  n Setting Program Start Times........................ 27

  n Setting Zone Run Times ............................... 28

  n Pump Control ................................................ 29

Timer Operation

  n Automatic Operation..................................... 30

  n Manual Operation.......................................... 31

   zStarting Programs and/or Zones Manually... 31

  n Watering Control Features ........................... 32

   zTo Pause Watering....................................... 32

   zTo Resume Watering.................................... 32

   zTo Cancel Watering...................................... 32

   zTo Skip Zones .............................................. 32

   zTo Adjust the Zone Run Time....................... 32

  n Using the Rain Delay Feature ...................... 33

  n Using the Season Adjust Feature................ 34

  n Turning Off the ECXTRA .............................. 35

Service and Specifications

  n Clearing the Program Memory..................... 36

  n Automatic Circuit Protection ....................... 37

  n Adding a Zone Module.................................. 37

  n Troubleshooting............................................ 38

  n Specifications................................................ 39

Glossary of Terms ....................................39-41

Warranty ............................................................ 42

Electromagnetic Compatibility................ 42

Timer Components

SENSOR 24 VAC

MANUAL

START

OFF

B F

Timer Components

The following are brief descriptions of the timer

components and display elements. Each of these items

will be explained in further detail within the appropriate

programming, operating and installation sections of

this guide.

1 - LCD Display

A - “Start Time” symbol is displayed when setting the

program start times.

B - Program start time identification numbers 1–4.

C - Main display of various time values and prompts.

D - Program A, B and C identifiers.

E - “Watering On” symbol is displayed when a

watering zone is running. Symbol blinks when

watering is paused.

F - “Watering Off” symbol is displayed when the

Rain Delay feature is active.

G - “Percent” symbol is displayed when the Season

Adjust feature is in use.

H - Watering zone identification numbers.

I - Day-of-the-week identifiers.

J - “Run Time” symbol is displayed when setting the

watering zone run times.

2 - Control Buttons

+/on button – Increases the time display, scrolls

forward through the program information and selects

watering days.

–/off button – Decreases the time display, scrolls

backward through the program information and

removes watering days.

next button – Advances to the next portion of

program information. Resumes watering if paused.

Advances through stations manually when watering.

manual start button – Selects and starts manual

watering operations.

3 - Control Dial – Selects all controller programming

and operation controls (except Manual Start).

Control Dial Positions

run – The normal dial position for all automatic

and manual operations.

current time/day – Enables the clock time and

day to be set.

watering days – Enables the watering day

schedules to be set and reviewed.

start times – Enables the program start times to

be set and reviewed.

set zone times – Enables the watering zone run

time to be set and reviewed.

(continued)

Timer Components

3 - Control Dial Positions (continued)

season adjust – Enables the run time of all

stations in a program to be simultaneously increased

or decreased in 10% increments.

special functions – Provides optional control

and timing features for pump operation.

rain delay – Enables all watering operations

to be delayed from 1 to 7 days.

off – Shuts off and prevents all automatic and

manual watering activity.

4 - Program Select Switch – Three-position slide

switch used to select watering program A, B or C

during the programming procedures and manual

operation.

5 - Sensor Bypass Switch – Controls the rain sensor

input circuit. Switch positions provided for sensor

circuit Enable and Disable (bypass).

6 - Rain Sensor Configuration Switch – Selects either

Normally Open (NO) or Normally Closed (NC) sensor

operation.

7 - Sensor Connection Terminals – Snap-in wire

connectors for (optional) rain sensor.

8 - Transformer Connection Terminals – Snap-in

connectors for the plug-in transformer wires.

9- Pump/Master Valve Connection Terminal –

Snap-in wire connector for a pump start relay

or master valve.

10 - Valve Common Connection Terminal – Snap-in

wire connector for the valve common wire.

11 - Plug-in 2-zone Module – Each 2-zone module

provides snap-in connectors for two separate zone

control valve power wires. Up to six modules

(12 zones) can in the installed in the outdoor timer

model and five modules (10 zones) in the indoor

model.

12 - Time PodTM Port – Accepts the (optional) ECXTRA

Time Pod unit to transfer Toro computer-aided

watering schedule data from your PC to the

ECXTRA timer.

13 - Power Supply (indoor models only) – 120/24 VAC

plug-in transformer.

14 -

Terminal Block – (outdoor models only) – Connec-

tion terminals for 120 VAC power wires.

BCA

MANUAL

START

OFF

MANUAL

START

OFF

Pump/MV

24VAC COM

Timer Components

Timer Installation

Note: The ECXTRA indoor timer is not weather resis-

tant and must be installed indoors or in a protected

area.

Indoor Model Installation

1. Select a location for the timer within 4′(1,2m) of an

electrical outlet to enable the transformer cord to

easily reach. Make sure the outlet is not controlled

by a light switch or used to power any large appliance

such as a refrigerator, freezer, or air conditioner.

2. Remove the mounting bracket attached to the back

of the timer housing by pulling the lower edge of the

bracket away and downward from the timer housing.

3. Place the mounting bracket (A) against the wall

aligning the top edge at about eye level. Drive two

stainless steel screws (B) into the wall through two

holes provided in the bracket. For additional stability,

secure the bracket with three screws.

Note: If you are installing the bracket on drywall or

masonry, install screw anchors (C) to prevent screws

from loosening.

4. Optional - Insert 3/4″(19mm) PVC conduit (D) for

valve wiring into bracket sleeve (E).

5. Align the slotted openings on the back of timer hous-

ing with the mounting bracket tabs. Slide the timer

downward to engage the tabs.

Note: After installation, store the Quick Start Guide in

the pocket (F) formed between the timer and bracket.

Connecting the Valves

1. Route the valve control wires between the valves and

the timer.

Note: The snap-in wire connectors accept 14–18

gauge (2mm2–1mm2) wire. Using direct-burial irrigation

cable is recommended. Choose a cable that has at

least one additional wire conductor than the number of

valves to

be connected.

2. Attach the white color-coded wire to either one of

the wires from each valve solenoid. This is called the

valve common wire.

3. Attach an individual color-coded wire to the remaining

wire from each valve solenoid. Make a note of the wire

color used for each valve and the watering zone it con-

trols. You will need this information when connecting

the valve wires to the timer.

CAUTION: Use Toro Waterproof Wire Connectors

(Model # 53687) or grease caps on all exposed wire

splice connections to prevent corrosion, connection

failure and possible short circuit.

4. Route the wire cable into the timer through the large

opening in the base of the housing, or through PVC

conduit (if installed). Strip insulation back 3/8″ (9mm)

from all wires being used.

Note: The zone module has snap-in wire terminals.

To attach wires, simply raise the lever, insert the

stripped wire, and press the lever down to secure.

5. Referring to “Timer Components” on page 5 and the

diagram above, connect the valve common wire to

the terminal labeled “COM” (10). Connect the individ-

ual zone valve wires to the appropriate zone module

terminals (11). Connect the master valve wire

(if applicable) to the terminal labeled PUMP/MV (9).

Note: Connecting a master valve or pump start relay

is optional and may not be required in your sprinkler

system.

SENSOR 24 VAC PUMP/MV COM

Valve Common Wire

Zone Valves

Master Valve

910

Connecting a Pump Start Relay

CAUTION: To prevent timer damage, ensure the

24 VAC pump relay current draw does not exceed

0.30 Amps. Do not connect the timer directly to the

pump starter.

1. Route a wire pair from the pump relay into the timer

housing.

2. Connect one wire to the terminal labeled COM (10).

Connect the remaining wire to the terminal labeled

PUMP/MV (9) as shown below.

CAUTION: To prevent pump damage due to

back pressure, connect a jumper wire from any

unused zone terminal to a zone terminal with a valve

connected.

Note: Refer to “Pump Control” section on page 29 for

important pump control information.

Connecting the Plug-In Transformer

CAUTION: Do not plug the transformer into an

electrical outlet until all of the wiring procedures have

been completed.

1. Route the cord from the transformer (13) through the

small opening provided in the base of the housing as

shown below.

2. Connect one transformer cable wire to each terminal

labeled 24 VAC (8). The wires can be connected to

either terminal.

Note: When power is applied to the timer, the display

will begin flashing 12:00 am. Press any button to halt

flashing.

SENSOR 24 VAC

MANUAL

START

OFF

SENSOR 24 VAC PUMP/MV COM

MANUAL

START

OFF

24 VAC Pump

Start Relay

9Jumper Wire

Valve Common Wire

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toro Timer Handbücher

Toro

Toro 53805 Betriebsanleitung

Toro

Toro ECXTRA Betriebsanleitung

Toro

Toro LawnMaster 53603 Bedienungsanleitung

Toro

Toro 53453 Bedienungsanleitung

Toro

Toro ECx Bedienungsanleitung

Toro

Toro 53453 Bedienungsanleitung

Toro

Toro Blue Stripe Bedienungsanleitung

Toro

Toro Lawn Master II 53805 Betriebsanleitung

Beliebte Timer Handbücher anderer Marken

Intermatic

Intermatic P1131 Bedienungsanleitung

Learning Resources

Learning Resources Time Tracker mini Bedienungsanleitung

CEBEK

CEBEK I-215 Bedienungsanleitung

Somogyi

Somogyi home TS MD 5 Bedienungsanleitung

Profile

Profile 010200280 Bedienungsanleitung

Gizmo

Gizmo T4 Bedienungsanleitung

Tekmar

Tekmar Timer 031 Bedienungsanleitung

Daikin

Daikin DST301B61 Bedienungsanleitung

sisel

sisel ENDA ETM2432 Bedienungsanleitung

B&Q

B&Q TE103 Bedienungs- und Wartungshandbuch

Hozelock

Hozelock AC Plus 2700 Bedienungsanleitung

GIC

GIC Eliro V7DDSS3Eliro V7DFTS3 Bedienungsanleitung

Tork

Tork TU40 Bedienungsanleitung

Emos

Emos EMT400F Bedienungsanleitung

FarmTek

FarmTek Polaris Bedienungsanleitung

Maximum

Maximum CRONUS Bedienungsanleitung

Uberhaus

Uberhaus TD133B Bedienungsanleitung

Clas Ohlson

Clas Ohlson 31-3766 Bedienungsanleitung