Toshiba GM-4020 Bedienungsanleitung

1.PREPARATION

Components 13

1 PREPARATION

Configuration of options

The available options are listed below. Contact your service technician or service representative for details.

Main body

Automatic Duplexing Unit

(MD-0106)

Reversing Automatic

Document Feeder

(MR-3027)

Platen Cover

(KA-2507PC)

Wireless LAN Module

(GN-1080)

Fax Kit

(GD-1330)

Paper Feed Unit

(MY-1043)

Drawer Module

(MY-1044)

Paper Feed Pedestal

(KD-1039)

Desk

(MH-2507)

Wir

LAN Module

(

)

reless LAN

N Module

(

(GN-

Components

1.PREPARATION

Preparation 1 - Turning Power ON 19

1 PREPARATION

Saving energy when not in use - Energy saving mode -

To reduce power consumption, the equipment automatically enters into the energy saving mode when a specified period

of time has passed since its last use.

Types of energy saving mode

Low power mode: “SAVING ENERGY” appears on the LCD screen.

The equipment automatically enters into low power mode when a specified period of time elapses.

Sleep mode: The LCD screen is turned off and only [ENERGY SAVER] is lit.

The equipment enters into sleep mode when a specified period of time elapses or the [ENERGY

SAVER] button is pressed.

When “Status Monitor” is running, the equipment does not enter into the sleep mode. If you want to enable the

sleep mode, exit it out.

P.74 “Status Monitor”

This equipment does not enter sleep mode when the Wireless LAN Module is installed.

The timers for “AUTO POWER SAVE” and “SLEEP MODE” have been set respectively as the factory default settings.

You can change them in the “USER FUNCTIONS” menu.

P.135 “User Functions Menu List”

To turn the equipment into the energy saving mode (Sleep mode) manually

Press [ENERGY SAVER].

Canceling conditions for energy saving mode

The energy saving mode is canceled under the following conditions.

When [ENERGY SAVER], [START], [COPY], [SCAN], or [FAX] on the control panel is pressed.

- For the low power mode: Press [ENERGY SAVER], [START], [COPY], [SCAN], or [FAX]

- For the sleep mode: Press [ENERGY SAVER]

When printing or scanning is performed from a PC connected with this equipment.

When fax data is received.

is installed.

5 VARIOUS FUNCTIONS

User Functions Menu List 135

User Functions Menu List

Before you start operating the “USER FUNCTIONS” menu, learn the general procedure below.

Press [CANCEL] to exit from the setting without making any changes. You can also exit with the button if it is

active.

Press [CLEAR/STOP] to delete a character. Keep pressing [CLEAR/STOP] for a second to clear all characters.

Press [USER FUNCTIONS].

Press or to scroll the menu, and then press to enter the function menu.

P.136 “User functions menu items”

Press or to scroll the menu, and then press to select the function.

Press or to scroll the menu, and then press to select the settings for each

function.

Press , , , or to select a setting, and then press [OK].

Continues to the next step if the selected setting has more options or values.

Exits from the menu if the selected setting has no more options or values. At this point, the operation is

complete.

Make option settings with , , , or , or enter characters using the digital keys, and

then press [OK].

Repeat this step if the selected setting has more options or values.

Exits from the menu if the selected setting has no more options or values. At this point, the operation is

complete.

The options or values vary depending on the function.

P.138 “GENERAL”

P.140 “COPY”

P.141 “SCAN”

P.141 “LIST”

P.142 “WIRELESS SETTING”

P.143 “ADDRESS BOOK”

P.143 “DRAWER”

P.143 “INFORMATION”

5.VARIOUS FUNCTIONS

User Functions Menu List 137

5 VARIOUS FUNCTIONS

REPORT SETTING AUTO JOURNAL For details of the fax settings,

see the Fax Guide.

MEMORY TX

MULTI TX

LIST ADDRESS BOOK P.141 “LIST”

FUNCTION

COUNTER

DEPARTMENT

WIRELESS SETTING - P.142 “WIRELESS SETTING”

ADDRESS BOOK E-MAIL SINGLE NUMBER P.143 “ADDRESS BOOK”

GROUP NUMBER

PHONE BOOK SPEED DIAL

GROUP DIAL

ONE TOUCH

DRAWER DRAWER 1 P.143 “DRAWER”

DRAWER 2

DRAWER 3

DRAWER 4

INFORMATION COUNTER TOTAL COUNTER P.143 “INFORMATION”

TONER REMAIN

Menu Functions Reference Pages

5 VARIOUS FUNCTIONS

142 User Functions Menu List

WIRELESS SETTING

You can configure the Wireless LAN Module if it is installed.

Select Infrastructure Mode or Ad Hoc Mode to specify the security mode.

If you do not set no security, anyone knows how the SSID can connect to the wireless network. Therefore, it is

recommended to set the security if it is possible.

Once the WIRELESS SETTING (except WPS) has been set up, exit from USER FUNCTIONS menu by pressing

[CANCEL] or [USER FUNCTIONS] button. When “APPLY AND REBOOT?” message appears, select “YES”, and

then press [OK]. The equipment is automatically rebooted and the WIRELESS SETTING is applied.

WPS

WPS is a standard to allow easy wireless LAN configurations. This equipment supports Push Button Configuration and

PIN methods.

The Push Button Configuration method completes the configuration by transmitting the ESSID and encryption key to

the wireless LAN device as you press the button on the Access Point.

Whereas the PIN method completes the configuration by transmitting the ESSID and encryption key to the wireless

LAN device as you register the PIN generated by the wireless LAN device to the Access Point.

WPA2-PSK, WPA2/WPA-PSK

WPA2 and WPA2/WPA-PSK are authentication methods using the PSK (Pre-Shared Key) between the Access Point

and other wireless devices.

To access the wireless network using the WPA2-PSK or WPA2/WPA-PSK authentication, the same PSK passphrase

must be assigned in both the Access Point and other wireless devices. If the PSKs are same between the Access

Point and other wireless devices, the Access Point allows them to access the wireless network through the Access

Point.

WEP

WEP is a data encryption method using the WEP key between the Access Point and other wireless devices.

WEP is less secure compared with WPA2 and WPA2/WPA-PSK. If the wireless network is configured in the

Infrastructure Mode and the Access Point supports WPA2-PSK or WPA2/WPA-PSK, it is recommended to use

WPA2-PSK or WPA2/WPA-PSK rather than WEP.

The following functions are available on the “WIRELESS SETTING” menu.

Menu Functions Settings Description

ON INFRASTRUCT

URE

WPS - Selects the connection method from

[PBC] or [PIN]. Press the WPS button on

the Access Point within 2 minutes of

selecting the PBC method. Register the

PIN generated by this equipment to the

Access Point within 2 minutes of selecting

the PIN method.

SSID/SECURITY - WPA2-PSK, WPA2/WPA-PSK:

Specify the passphrase after selecting

AES if you are using WPA2-PSK, or after

selecting TKIP+AES if you are using

WPA2/WPA-PSK.

WEP:

Selects the WEP encryption and key

entry method, and then enter the WEP

key.

NONE:

Sets no security for wireless access.

AD HOC AUTO - At first, select the channel setting method.

Next, selects the WEP encryption and

key entry method, and then enter the

WEP key.

MANUAL -

OFF - Disables the wireless network.

8.Appendix

Specifications of Options 171

8 Appendix

Wireless LAN Module

FAX Unit

For detail specifications, see the following manual.

Fax Guide

TOSHIBA-recommended paper is used for the values above. Specifications and appearance are subject to change

without notice in the interest of product improvement.

Model name GN-1080

Transmission Format IEEE 802.11b/g/n standard

Direct Sequence Spread Spectrum (DSSS)

Orthogonal Frequency Division Multiplexing (OFDM)

Data Transmission Speed IEEE 802.11b: 11, 5.5, 2, 1 Mbps

IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps

IEEE 802.11n: MSC0-15 (HT20/40)

Access Method CSMA/CA

Wireless Category Low-power data transmission system

Security Static WEP

Key Length: 40 bit, 104 bit

WPA2: PSK(AES(CCMP))

WPA2/WPA mixed: PSK(AES(CCMP)+TKIP)

Operation Mode Infrastructure Mode, Ad Hoc Mode, WPS2.0 PBC or PIN method

Wireless ON/OFF Available

Wired LAN/Wireless LAN

Simultaneous Operation

Not Available

Model name GD-1330

Andere Toshiba Multifunktionsdrucker Handbücher

Toshiba

Toshiba FC-2000AC Bedienungsanleitung

Toshiba

Toshiba e-STUDIO5520c Bedienungsanleitung

Toshiba

Toshiba e-STUDIO 165 Bedienungsanleitung

Toshiba

Toshiba E-Studio167 Bedienungsanleitung

Toshiba

Toshiba e-STUDIO200L Bedienungsanleitung

Toshiba

Toshiba E-studio2040c Bedienungsanleitung

Toshiba

Toshiba e-Studio477s Bedienungsanleitung

Toshiba

Toshiba E-STUDIO 232 Stücklistenhandbuch

Toshiba

Toshiba e-studio281c Anleitung zur Verwendung

Toshiba

Toshiba e-studio905 Bedienungsanleitung

Toshiba

Toshiba E-STUDIO 2303A Bedienungsanleitung

Toshiba

Toshiba e-STUDIO3511 Handbuch

Toshiba

Toshiba e-STUDIO287CS Bedienungsanleitung

Toshiba

Toshiba e-Studio477s Bedienungsanleitung

Toshiba

Toshiba GD-1170 Bedienungsanleitung

Toshiba

Toshiba E-STUDIO202S Bedienungsanleitung

Toshiba

Toshiba e-STUDIO 165 Bedienungsanleitung

Toshiba

Toshiba e-STUDIO556 Bedienungsanleitung

Toshiba

Toshiba e-STUDIO163 Bedienungsanleitung

Toshiba

Toshiba e-STUDIO287CS Bedienungsanleitung

Toshiba

Toshiba e-STUDIO160 Anleitung zur Verwendung

Toshiba

Toshiba e-studio222cs Konfigurationshandbuch

Toshiba

Toshiba E-STUDIO E-Studio 3511 Bedienungsanleitung

Toshiba

Toshiba E-STUDIO 5518A Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung