Toshiba IK-WB11 Bedienungsanleitung

Toshiba IK-WB11 Camera Installation & Configuration Guide 2

Version 3.0 Series

Contents

1PREREQUISITES.......................................................................................................................................................................................3

2CAMERA CONFIGURATION................................................................................................................................................................. 4

2.1 SEARCHING AND ENTERING THE CAMERA. ................................................................................................................................................ 4

2.2 NETWORK SETTINGS CONFIGURING........................................................................................................................................................... 6

2.3 ADMINISTRATOR CREDENTIALS CONFIGURING ......................................................................................................................................... 7

3ADVANCED CAMERA CONFIGURATION......................................................................................................................................... 8

Toshiba IK-WB11 Camera Installation & Configuration Guide 3

This guide explains how to install and configure the Toshiba IK-WB11 camera in the local

network.

It is strongly recommended that you add only one camera at a time to the network for

configuration.

1 Prerequisites

Before the configuration begins, check the following:

 The camera is unpacked and correctly connected to the power source and network. If

using a Wired LAN connection, confirm that the network LAN is plugged in.

If using a wired network, make sure to plug in the network cable to the camera before

powering the camera on. If the network cable is not connected during start-up, the

camera will automatically switch to wireless mode.

 WebCCTV NVR is installed, activated, running and properly connected to the network

(see Installation manual).

 You have an exact list of IP addresses and passwords for WebCCTV NVR and the

network cameras.

 The IP address of WebCCTV NVR is properly configured (see Installation manual).

 Monitor, keyboard and mouse are connected to WebCCTV NVR (see Installation

manual).

 If Java 2 Runtime Environment SE Ver.1.4.2 is not installed , this product may not

output images or sound properly. Access the following website to download “Java 2

Runtime Environment SE” http://java.com

 The IP address of the camera and the IP address of the computer you will use for the

network camera configuration are in the same range. The default camera network

settings are as follows:

IP address: 198.162.0.30, Subnet mask: 255.255.255.0

If your computer address is not in the range 198.162.0.n please change it appropriately.

Make sure that IP address of the camera and the IP address of the computer you will

use for the network camera configuration are in the same range. After the

configuration is complete, make sure that the IP address of WebCCTV/GuardNVR

server and the IP address of the camera are in the same range.

Version 3.0 Series

Toshiba IK-WB11 Camera Installation & Configuration Guide 4

2 Camera configuration

To begin the configuration of the camera you should use the Camera Finder application.

Camera Finder is an application for searching network cameras. You can use it by

downloading it from the Toshiba website on the following link:

http://www.toshiba.com/taisisd/security/support/support_dloads.jsp

2.1 Searching and entering the camera.

To configure аcamera follow the steps below:

1. Download Camera Finder using the link above. Open the Setup file and follow the

onscreen instructions to install the Camera Finder application.

2. After the installation is complete, go to Start->Program->TOSHIBA Network

Camera item.

Camera Finder Screen

Version 3.0 Series

Toshiba IK-WB11 Camera Installation & Configuration Guide 5

3. On this screen click Search button. All cameras, which are currently connected to the

network, appear.

Make sure that the IP addresses of a camera and computer, which you launched

Camera Finder from, are in the same range.

4. Choose the camera you want to login to from the list and click Administrator button

to login as administrator.

Camera Administrator Login Screen

5. In the browser screen that appeared specify default administrator credentials as

follows: Login ID: root, Password: ikwb.

6. Click Login button.

Version 3.0 Series

Toshiba IK-WB11 Camera Installation & Configuration Guide 6

2.2 Network settings configuring

Camera Network Settings Screen

1. After you have logged in go to Network Settings->General and enter there the

following settings:

 Specify Camera Name

 Switch Auto Identification of Other Camera to OFF

 Switch DHCP to OFF.

 Specify IP address and Subnet Mask

 Specify Default Gateway IP address

 HTTP Port Number leave as default - 80

Contact your system administrator to obtain all required network parameters.

It is important to assign an IP address statically, not using a DHCP service, in order to

properly reference the camera from WebCCTV software.

2. Click Save button.

Version 3.0 Series

Toshiba IK-WB11 Camera Installation & Configuration Guide 7

2.3 Administrator credentials configuring

To change administrator credentials do the following:

1. Go to Administrator functions->Changing the password.

Changing Administrator Credentials Screen

2. Specify current Login ID and Password in the corresponding fields.

Default administrator credentials are:

Password: ikwb

3. Specify new Login ID

4. Specify new password and confirm it in the corresponding fields.

5. Click Save.

Use these credentials while adding the camera to WebCCTV software.

Version 3.0 Series

Toshiba IK-WB11 Camera Installation & Configuration Guide 8

3 Advanced camera configuration

Quadrox recommends implementing the following settings:

1. Go to Camera Settings->General item.

Camera Settings Screen

2. You may not change Camera Picture Size, it is adjustable from WebCCTV software.

3. You may choose Picture Quality you want, but please note higher picture quality

consumes more bandwidth.

4. You may not change Frame Rate, it is adjustable from WebCCTV software.

5. You may choose Installation Environment depending on a camera location.

6. AE compensation, Auto B/W, Shutter Speed are advanced exposure settings,

configure them if you are an experienced user!

7. Auto Slow Shutter – must be OFF! (ON by default)

8. Auto Sensitivity Boost – must be OFF! (ON by default)

9. You may configure Sound Sensitivity.

10. Click Save button.

If you changed the computer IP address before camera configuration – don’t forget to

put it back.

Version 3.0 Series

Inhaltsverzeichnis

Andere Toshiba Digitalkamera Handbücher

Toshiba

Toshiba PDR-M1 Bedienungsanleitung

Toshiba

Toshiba PDR-M3 Bedienungsanleitung

Toshiba

Toshiba BU238M Bedienungsanleitung

Toshiba

Toshiba T10 Bedienungsanleitung

Toshiba

Toshiba PDR-M25 - 2MP Digital Camera Bedienungsanleitung

Toshiba

Toshiba PDR-3320 Bedienungsanleitung

Toshiba

Toshiba BU505MCG Bedienungsanleitung

Toshiba

Toshiba PDR-M60 Bedienungsanleitung

Toshiba

Toshiba PDR-M70 Bedienungsanleitung

Toshiba

Toshiba PDR-M4 Montageanleitung

Toshiba

Toshiba PDR-T20 Bedienungsanleitung

Toshiba

Toshiba IK-527A Bedienungsanleitung

Toshiba

Toshiba Sora PDR-T10 Bedienungsanleitung

Toshiba

Toshiba PDR-M25 - 2MP Digital Camera Bedienungsanleitung

Toshiba

Toshiba BC Series Bedienungsanleitung

Toshiba

Toshiba IK-HR1S Bedienungsanleitung

Toshiba

Toshiba PDR-M60 Bedienungsanleitung

Toshiba

Toshiba PDR-M25 Bedienungsanleitung

Toshiba

Toshiba PDR-3300 - 3.2MP Digital Camera Montageanleitung

Toshiba

Toshiba PDR-M61 Montageanleitung

Toshiba

Toshiba PDR-M61 Bedienungsanleitung

Toshiba

Toshiba PDR-M3 Bedienungsanleitung

Toshiba

Toshiba PDR-2300 Bedienungsanleitung

Toshiba

Toshiba PDR-M81 Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung