Toshiba TOSVERT VF-AS3 Bedienungsanleitung

E6582162c

Safety precautions

Introduction

Contents

Read first



Installation and wir-

ing



Measures to satisfy

standards



Selection and

installation of

peripheral devices



Table of parameters



Specifications



























Industrial Inverter

(For 3-phase motors)

Instruction Manual

Totally enclosed box type Inverter

3-phase 480V class 0.4 to 75kW

Notice

1. Make sure that this instruction manual is delivered to the end user of the inverter unit.

2. This manual gives supplementary information of some items referred in the instruction

manual E6582062 supplied with the product. Read this manual and E6582062 before

installing or operating the inverter unit, and store them in a safe place for reference.





I-1 I. Safety precautions

,,,





































Thoroughly familiarize yourself with the symbols and indications shown in “I. Safety Precautions,” of

the instruction manual E6582062 and below, and then continue to read manuals. Make sure that

you observe all warnings given.

 Transportation & installation

,Safety precautions

WARNING

Prohibited

• Do not install and operate the inverter if it is damaged or any of its components is missing.

This will result in electric shock or fire. Please call your Toshiba distributor for repairs.

• Do not place any inflammable object near the inverter.

If flame is emitted due to failure in the inverter, this will lead to fire.

• Do not operate the inverter with the front cover removed.

The unit contains high voltage parts and contact with them will result in electric shock.

Mandatory

action

• Operate under the environmental conditions prescribed in the instruction manual.

Operations under any other conditions will result in an accident or failure.

• Mount the inverter on a metal plate.

The rear panel will get high temperature. Do not mount the inverter on an inflammable object,

this will result in fire.

• An emergency stop device must be installed that is configured in accordance with the system

specifications.

If such an emergency stop device that can activate mechanical brake by shutting off power

supply is not installed, operation cannot be stopped immediately by the inverter alone, thus

resulting in an accident or injury.

• Close the front cover correctly, mount operation panel of the unit and close Ethernet connector

cover.

A gap can allow dust and water penetration and result in damage, fire or electric shock.

• All options to be used must be those specified by Toshiba.

The use of options other than those specified by Toshiba will result in an accident.

• In using a power distribution device and options for the inverter, they must be installed in a

cabinet.

When they are not installed in the cabinet, this will result in electric shock.

E6582162c

I. Safety precautions I-2



CAUTION

Prohibited

• For transporting or carrying the inverter, do not hold by the front cover.

The cover will come off and the unit will drop, resulting in injury.

• Do not install the inverter in any place with large vibration.

The unit will fall due to the vibration, resulting in injury.

• Do not connect an capacitor with DC input terminal [PA/+], [PC/-] (including DC link with

another inverter) without installing proper pre-charge circuit.

Excessive capacitor between DC terminals will cause the input overcurrent of inverter and will

result in product damage or failure.

Mandatory

action

• Carry the inverter by two people or more when the inverter is the model mass 20kg or more

(VFAS3-4110PCE - 4370PCE).

If you carry the inverter alone, this will result in injury.

• Transport a large-capacity inverter (VFAS3-4450PCE - 4750PCE) by a crane.

If you transport a heavy load by hand, this will result in injury.

Please take the utmost care for the operator's safety, and please handle the inverter carefully in

order not to damage the product.

For lifting the inverter, hang the inverter with wire ropes via hanging bolts (hanging holes)

provided at upper part or lower part of the inverter as shown below.

• Please make sure that the inverter is hanged by two wire ropes in a balanced manner, and please

be careful that the inverter does not receive excessive force during the hanging operation.

• Carry the inverter with the cover attached, and avoid holding or putting your hands in the wiring

holes during the transportation.

Otherwise you can have your hands pinched and injured.

• Transport the operation panel in accordance with law.

Please transport the operation panel by airplane or ship in accordance with law as a lithium

battery is used in the operation panel.

• Install the inverter at a place which can support the unit's mass.

If you install the inverter at a place which does not support the unit's mass, the unit will fall,

resulting in injury.

45° max.

II-1 II. Introduction

,,,





































Thank you for purchasing Toshiba’s totally enclosed box type inverter, “TOSVERT VF-AS3”.

To handle TOSVERT VF-AS3 correctly, this instruction manual explains how to install the enclosed

box type inverter, refer to the inverter manual E6582062 for how to wire the inverter, operation pro-

cedure, how to run the motor, measures for protective functions (when an alarm/trip occurs) and etc.

Please be informed that the specifications described in the instruction manuals, technical data may

be changed without notice.

,, Introduction

E6582162c





Contents

I Safety precautions .............................................................................................................................................I-1

II Introduction .......................................................................................................................................................II-1

1 Read first...........................................................................................................................................................1-1

1. 1 Check product purchase ............................................................................................................................1-1

1. 2 Indication of product type ...........................................................................................................................1-4

1. 3 Structure of equipment...............................................................................................................................1-6

2 Installation and wiring........................................................................................................................................2-1

2. 1 Installation ..................................................................................................................................................2-2

2. 2 How to remove covers of inverter ..............................................................................................................2-6

2. 3 Wiring .........................................................................................................................................................2-7

3 Measures to satisfy standards ..........................................................................................................................3-1

3. 1 How to deal with CE marking.....................................................................................................................3-1

3. 2 Compliance with UL/CSA standards..........................................................................................................3-5

3. 3 Compliance with safety standards .............................................................................................................3-7

3. 4 Compliance with ATEX directive................................................................................................................3-7

4 Selection and installation of peripheral devices ................................................................................................4-1

4. 1 Selection of wire size .................................................................................................................................4-1

4. 2 Selection of a wiring device........................................................................................................................4-3

4. 3 External option and insert type option........................................................................................................4-7

5 Table of parameters ..........................................................................................................................................5-1

6 Specifications ....................................................................................................................................................6-1

6. 1 Model and main standard specification......................................................................................................6-1

6. 2 Outside dimensions and mass ...................................................................................................................6-6

1-1 1. Read first

,,,





































This chapter explains check items when you receive the inverter, names of parts of the inverter, and

the flow of basic procedures before operation.

Before using the product you have purchased, check to make sure that it is exactly what you ordered.

Check the contents of packing and accessories for damage.

Read first

1. 1 Check product purchase

CAUTION

Mandatory

action

• Use the inverter that conforms to specifications of the power supply and the three-phase motor

to be operated.

If you use the inappropriate inverter, not only will the three-phase motor not rotate correctly, but

it will cause serious accidents such as overheating and burning out.

E6582162c

1. Read first 1-2





VFAS3-4750PCE

75kW-111kVA-100HP(HD) / 90kW-132kVA-125HP(ND)

U(V)

F(Hz)

I(A)

INPUT OUTPUT

3PH 380/480 3PH 380/480

50/60

140 max

Motor Overload Protection: Class 10

TRANSISTOR INVERTER

F(Hz)

I(A)

3PH 380/480 3PH 460

121 max

Serial No. 9630 20001421 0001 (1)

SCCR : for rating and protection refer to User Manual

FLA 124

173

TSIJ

0.01/590

Manufactured in China

from foreign and

domestic components

(3)

165 max 145

142 max FLA 156

HD ND HD ND

U(V)

580,Horikawa-cho,Kawasaki,212-0013,Japan

Inverter type

Inverter rated

output capacity

Rated voltage

Rated input

current

Rated output

current

Name plate

Rating label

Applicable

motor capacity

Rated voltage

90kW/125HP

75kW/100HP

(Normal Duty)

(Heavy Duty)

3PH-380/480V

Model Number: VFAS3-4750PCE

Carton box

Type indication label

Danger label

Inverter main unit

Rating label Name

plate

Danger label

* Refer to [1.2] of E6582062 for (HD) and (ND).

Andere Handbücher für TOSVERT VF-AS3

Inhaltsverzeichnis

Andere Toshiba Wechselrichter Handbücher

Toshiba

Toshiba Tosvert VF-A3 Bedienungsanleitung

Toshiba

Toshiba G3 TOSVERT-130 Bedienungsanleitung

Toshiba

Toshiba S11 ASD Leitfaden

Toshiba

Toshiba TOSVERT VF-AS3 Gebrauchsanweisung

Toshiba

Toshiba TOSVERT VF-PS1 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-A7 Bedienungsanleitung

Toshiba

Toshiba ACE-tronics G9 ASD Leitfaden

Toshiba

Toshiba TOSVERT VF-S11 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-AS1 Series Bedienungsanleitung

Toshiba

Toshiba TOSVERT IPE001Z Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-PS1 Bedienungsanleitung

Toshiba

Toshiba Power Inverter Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-nC1 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-S15 series Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-S15 series Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-A7 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-S11 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-AS3 Gebrauchsanweisung

Toshiba

Toshiba TOSVERT-130G2+ Bedienungsanleitung

Toshiba

Toshiba WAM600AR-SV-8 Bedienungsanleitung

Toshiba

Toshiba BACnet BCN001Z Stücklistenhandbuch

Toshiba

Toshiba TOSVERT VF-S15 series Bedienungsanleitung

Toshiba

Toshiba Q9 True Torque Control2 Adjustable Speed... Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-S15 series Gebrauchsanweisung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung