Toshiba TOSVERT VF-S15 series Bedienungsanleitung

E6581875

TOSVERT VF-S15

Shock monitoring function Instruction Manual

E6581875

- Contents -

1. Introduction .................................................................................................. 2

2. Shock monitoring function.......................................................................... 2

3. Setting and operation of shock monitoring function................................ 3

3.1 Related parameters......................................................................................................... 3

3.2 Operation......................................................................................................................... 3

E6581875

1. Introduction

TOSVERT VF-S15 is equipped with shock monitoring function.

In case output current or torque exceeds or lowers the set level for a certain amount of time, the inverter

outputs the alarm signal from output terminals or trips (inverter stops). Temporary change in current or

torque can be eliminated from detecting conditions.

Shock monitoring function enables monitoring the load side and protecting the equipments in case of load

abnormality including the detection of excessive loading of conveyors and breakage of conveyor belt.

2. Shock monitoring function

When output current or torque exceeds or lowers the set level for a certain amount of time, shock

monitoring function outputs alarm signal from the output terminals or the inverter trips.

Over-torque trip/ alarm and small current trip/alarm have similarly functions as the shock monitoring

functions. The difference is as described below;

Shock monitoring function Over-torque trip/ alarm Small current trip/ alarm

Main parameters f590

(Shock monitoring) f615

(Over-torque trip/

alarm selection)

f610

(Small current trip/

alarm selection)

Subject of detection:

torque/ output current Torque detection or output

current detection are

selectable

Torque detection Output current detection

Detection method Over-current/ torque or

Low-current/ torque are

selectable

Over-torque Low-current

Action at detection Trip or alarm are selectable

Detection level 0-250(%) 1-250 (%) 0-150 (%)

Detection time 0-10.0 (s) 0-10.0 (s) 0-255 (s)

Detecting conditions -Detection waiting time

can be set at start-up

-Always detecting or

during operation except

acceleration/deceleration

are selectable *

Always detecting Always detecting

* Temporary change in output current or torque at start-up or acceleration/ deceleration can be eliminated

from detecting conditions.

E6581875

3. Setting and operation of shock monitoring

function

3.1 Related parameters

Set items and conditions of detection using parameters.

Title Function Adjustment range Default setting

f590 Shock monitoring 0: Disabled

1: Current detection

2: Torque detection 0

f591 Shock monitoring trip/alarm

selection 0: Alarm only

1: Tripping 0

f592 Shock monitoring detection

direction selection 0: Over-current/ torque detection

1: Low-current/ torque detection 0

f593 Shock monitoring detection level 0-250 (%) 150

f595 Shock monitoring detection time 0.0-10.0 (s) 0.5

f596 Shock monitoring detection

hysteresis 0-100 (%) 10

f597 Shock monitoring detection start

waiting time 0.0-300.0 (s) 0.0

f598 Shock monitoring detection action

selection

0: During operation

1: During operation (except acceleration/

deceleration) 0

3.2 Operation

1) Over-current/ torque detection

Select object of detection with f590: f590=1(Current detection), 2(Torque detection)

f591=0(Alarm only)

f592=0(Over-current/ torque detection)

Output terminal function: 182 (SUPA) Shock monitoring pre-alarm signal

less than

f595 f595

OFF ON OFF

Alarm signal output

f593

f593-f596

Output current/ torque (%)

When setting f591=1(Tripping), inverter trips after low-current/ torque is detected for the period of

time set with f595. Then, alarm signal remains ON.

E6581875

2) Low-current/ torque detection

Select object of detection with f590: f590=1(Current detection), 2(Torque detection)

f591=0(Alarm only)

f592=1(Low-current/ torque detection)

Output terminal function: 182 (SUPA) Shock monitoring pre-alarm signal

less than

f595 f595

OFF

Alarm signal output

f593

f593-f596

Output current/ torque (%)

When setting f591=1(Tripping), inverter trips after low-current/ torque is detected for the period of time

set with f595. Then, alarm signal remains ON.

3) In case of setting f597 and f598

Waiting time until shock monitoring detection after start-up (after operation command is on) can be set

by f597 (Shock monitoring detection start waiting time).

If eliminating the time during acceleration/ deceleration from detecting conditions, select f598

(Shock monitoring detection action selection) =1.

f598=1, f597=5(s), and acceleration exceeds 5 seconds.

f597 f595

Operation command

Alarm signal output

Output frequency (Hz)

f593

Output current/ torque (%)

* In case of less than f595, and the inverter is in acceleration/ deceleration status or over-current stall

during detection activates, detection time will be reset.

E6581875

f598=1, f597=15 (s), and acceleration continues for less than 15 seconds.

f597 f595

Operation command

Alarm signal output

Output frequency (Hz)

f593

Output current/ torque (%)

* In case of less than f595, and the inverter is in acceleration/ deceleration status or over-current stall

during detection activates, detection time will be reset.

Andere Handbücher für TOSVERT VF-S15 series

Inhaltsverzeichnis

Andere Toshiba Wechselrichter Handbücher

Toshiba

Toshiba TOSVERT VF-S15 series Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-A7 Bedienungsanleitung

Toshiba

Toshiba VF-SX Bedienungsanleitung

Toshiba

Toshiba Low Acoustical Noise Series Bedienungsanleitung

Toshiba

Toshiba RAS-25PKVSG-ND Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-S11 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-PS1 Stücklistenhandbuch

Toshiba

Toshiba TOSVERT VF-PS1 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-FS1 Series Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-AS1 Series Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-S15 series Bedienungsanleitung

Toshiba

Toshiba H9 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-AS1 Series Stücklistenhandbuch

Toshiba

Toshiba TOSVERT VF-S11 Bedienungsanleitung

Toshiba

Toshiba Power Inverter Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-AS1 Series Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-AS3 Gebrauchsanweisung

Toshiba

Toshiba Q9 True Torque Control2 Adjustable Speed... Bedienungsanleitung

Toshiba

Toshiba VLP Technology Q9 Plus Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-AS3 Bedienungsanleitung

Toshiba

Toshiba G3 TOSVERT-130 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-AS3 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-nC3 Bedienungsanleitung

Toshiba

Toshiba PWU003Z Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung