Toshiba 32AV933N Bedienungsanleitung

Print this page

SERVICE MANUAL

LCD Color Television

32AV933N Ver. 1.00

Updating history

Currently there are no updates available.

Please check back at a later time for any future

updates.

TOSHIBA WEB-ZEUS

>> terms and conditions >> privacy policy

Print this page

WARNING:

You are requested that you shall not modify or alter the information or data provided herein without prior written consent by Toshiba.

Toshiba shall not be liable to anybody for any damages, losses, expenses or costs, if any, incurred in connection with or as a result

of such modification or alteration.

THE INFORMATION OR DATA HEREIN SHALL BE PROVIDED "AS IS" WITHOUT ANY WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of use of any

information or data provided herein.

IMPORTANT NOTICE

TOSHIBA WEB-ZEUS

>> terms and conditions >> privacy policy

Print this page

The EC is actively promoting the WEEE & RoHS Directives that define standards for recycling and reuse of Waste Electrical and Electronic

Equipment and for the Restriction of the use of certain Hazardous Substances. From July 1, 2006, the RoHS Directive will prohibit any marketing

of new products containing the restricted substances.

Increasing attention is given to issues related to the global environmental. Toshiba Corporation recognizes environmental protection as a key

management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba

proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts.

Green procurement of parts is not only confined to manufacture. The same green parts used in manufacture must also be used as replacement

parts.

GREEN PRODUCT PROCUREMENT

TOSHIBA WEB-ZEUS

>> terms and conditions >> privacy policy

Print this page

This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at large to be environmentally

responsible. Lead-free solder must be used in the servicing and repair of this product.

WARNING: This product is manufactured using lead free solder.

DO NOT USE LEAD BASED SOLDER TO REPAIR THIS PRODUCT!

The melting temperature of lead-free solder is higher than that of leaded solder by 86ºF to 104ºF (30ºC to 40ºC). Use of a soldering iron designed

for lead-based solders to repair product made with lead-free solder may result in damage to the component and or PCB being soldered. Great

care should be made to ensure high-quality soldering when servicing this product especially when soldering large components, through-hole pins,

and on PCBs as the level of heat required to melt lead-free solder is high.

LEAD-FREE SOLDER

TOSHIBA WEB-ZEUS

>> terms and conditions >> privacy policy

Print this page

WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE"

INSTRUCTIONS BELOW.

Safety Precaution

WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS

RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.

1. An isolation transformer should be connected in the power line between the receiver and the AC line before any service is performed on the

receiver.

2. Always disconnect the power plug before any disassembling of the product. It may result in electrical shock.

3. When replacing a chassis in the cabinet, always be certain that all the protective devices are put back in place, such as nonmetallic control

knobs, insulating covers, shields, isolation resistor-capacitor network, etc.

4. Always keep tools, components of the product, etc away from the children, These items may cause injury to children.

5. Depending on the model, use an isolation transformer or wear suitable gloves when servicing with the power on, and disconnect the power

plug to avoid electrical shock when replacing parts. In some cases, alternating current is also impressed in the chassis, so electrical shock is

possible if the chassis is contacted with the power on.

6. Always use the replacement parts specified for the particular model when making repairs. The parts used in products require special safety

characteristics such as inflammability, voltage resistance, etc. therefore, use only replacement parts that have these same characteristics.

Use only the specified parts when the mark is indicated in the circuit diagram or parts list.

SAFETY INSTRUCTION

7. Parts mounting and routing dressing of wirings should be the same as that used originally. For safety purposes, insulating materials such as

isolation tube or tape are sometimes used and printed circuit boards are sometimes mounted floating. Also make sure that wirings is routed

and clamped to avoid parts that generate heat and which use high voltage. Always follow the manufactured wiring routes / dressings.

8. Always ensure that all internal wirings are in accordance before re-assembling the external casing after a repairing completed. Do not allow

internal wiring to be pinched by cabinets, panels, etc. Any error in reassembly or wiring can result in electrical leakage, flame, etc., and may

be hazardous.

9. NEVER remodel the product in any way. Remodeling can result in improper operation, malfunction, or electrical leakage and flame, which

may be hazardous.

10. Touch current check. (After completing the work, measure touch current to prevent an electric shock.)

Plug the AC cord directly into the AC outlet. Do NOT use an isolation transformer for this check.

Connect a measuring network for touch currents between each exposed metallic part on the set and a good earth ground such as a

water pipe.

Annex D

(normative)

Measuring network for TOUCH CURRENTS

The potential at any point (TOUCH CURRENT) expressed as voltage and does not exceed the following value:

Resistance values in orms (Ω).

Input resistance : 1 MΩ

Input capacitance : 200 pF

Frequency range : 15 Hz to 1 MHz and d.c. respectively

Note: Appropriate measures should be taken to obtain the correct value in case of non sinusoidal waveforms.

The measuring instrument is calibrated by comparing the frequency factor of with the solid line in figure F.2 of IEC 60990 at

various frequencies. A calibration curve is constructed showing the deviation of from the ideal curve as a function of frequency.

TOUCH CURRENT = / 500 (peak value).

V: Voltmeter or oscilloscope

(r.m.s. or peak reading)

The part or contact of a TERMINAL is not HAZARDOUS LIVE if:

Note: The limit values of = 0.35 V (peak) for a.c. and = 1.0 V for d.c. correspond to the values 0.7 mA (peak) a.c. and 2.0 mA

d.c.

a) The open-circuit voltage should not exceed 35 V (peak) a.c. or 60 V d.c. or, if a) is not met.

b) The measurement of the TOUCH CURRENT shall be carried out in accordance with IEC 60990, with the measuring network

described in Annex D of this standard.

The TOUCH CURRENT expressed as voltages and , does not exceed the following values:

- for a.c. : = 35 V (peak) and = 0.35 V (peak);

- for d.c. : = 1.0 V

TOSHIBA WEB-ZEUS

>> terms and conditions >> privacy policy

Print this page

Product Safety Notice

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are often passed unnoticed

by a visual inspection and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher

voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in this manual and its supplements;

electrical components having such features are identified by the international hazard symbols on the schematic diagram and the parts list.

Before replacing any of these components, read the parts list in this manual carefully. The use of substitute replacement parts which do not have

the same safety characteristics as specified in the parts list may create electrical shock, fire, or other hazards.

SAFETY INSTRUCTION

TOSHIBA WEB-ZEUS

>> terms and conditions >> privacy policy

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba LCD-Fernseher Handbücher

Toshiba

Toshiba 32RV525RZ Service-Handbuch

Toshiba

Toshiba 26WL46B Bedienungsanleitung

Toshiba

Toshiba 40L3400U Bedienungsanleitung

Toshiba

Toshiba 22AV500U - 22" LCD TV Bedienungsanleitung

Toshiba

Toshiba 46XV540U Bedienungsanleitung

Toshiba

Toshiba 26AV502U - 26" LCD TV Bedienungsanleitung

Toshiba

Toshiba 19HLV87 - 19" LCD TV Bedienungsanleitung

Toshiba

Toshiba 32BV512B Bedienungsanleitung

Toshiba

Toshiba 46XV640U - 46" LCD TV Bedienungsanleitung

Toshiba

Toshiba 47ZV650U - 47" LCD TV Bedienungsanleitung

Toshiba

Toshiba 32C110U Kurzanleitung

Toshiba

Toshiba 32AV934 Bedienungsanleitung

Toshiba

Toshiba 40LV703R Bedienungsanleitung

Toshiba

Toshiba RL83* Digital Series Bedienungsanleitung

Toshiba

Toshiba 37C3530D Bedienungsanleitung

Toshiba

Toshiba 47VL800A Bedienungsanleitung

Toshiba

Toshiba L9363 Digital Series Bedienungsanleitung

Toshiba

Toshiba 46G310U Bedienungsanleitung

Toshiba

Toshiba Regza 55ZV650U Bedienungsanleitung

Toshiba

Toshiba Regza 40XF550U Bedienungsanleitung

Toshiba

Toshiba 40L1353N Bedienungsanleitung

Toshiba

Toshiba 40BV705B Bedienungsanleitung

Toshiba

Toshiba 40TL20 Series Bedienungsanleitung

Toshiba

Toshiba 40BV700 Bedienungsanleitung

Beliebte LCD-Fernseher Handbücher anderer Marken

LG 32LC4R* Bedienungsanleitung

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Runco

Runco CX-52HD Bedienungsanleitung

Sharp

Sharp LC-32AX3H Bedienungsanleitung

Philips

Philips 47PFL7704D Bedienungsanleitung

Vizio

Vizio VO42LFHDTV10A Bedienungsanleitung

Philips

Philips 42PF7520D/79 Bedienungsanleitung

Insignia

Insignia NS-LCD32-09 Bedienungsanleitung

Sony

Sony WEGA KLV-27HR3 Bedienungsanleitung

Nexus

Nexus NX32031 Bedienungsanleitung

Zenith

Zenith Z32LC2D Bedienungsanleitung

Sony

Sony KDL-32S3000R - 32" Class Bravia S-series Digital Lcd... Bedienungsanleitung

Medion

Medion MEDION LIFE X14330 Bedienungsanleitung

Vizio

Vizio HDTV30A VW32L Bedienungsanleitung

Sharp

Sharp LC-24DV250K Bedienungsanleitung

SOYO

SOYO Dymond DYLT032A Bedienungsanleitung