Toshiba 32HLX84 Bedienungsanleitung

SERVICE MANUAL

LCD Color TV

32HLX84

FILE NO. 020-200422

DOCUMENT CREATED IN JAPAN, Oct. 2004

Pravin Mevada

TABLE OF CONTENTS

SERVICE SAFETY PRECAUTIONS .................................................................................................................................... 3

HANDLING THE LCD MODULE ......................................................................................................................................... 5

SERVICE MODE .................................................................................................................................................................. 7

TROUBLESHOOTING DIAGNOSIS FUNCTION .............................................................................................................. 8

LAYOUT OF MAJOR BOARDS ............................................................................................................................................ 10

MECHANICAL DISASSEMBLY .......................................................................................................................................... 11

EXPLODED VIEW ............................................................................................................................................................. 13

PACKING DISASSEMBLY .................................................................................................................................................. 15

CHASSIS AND CABINET REPLACEMENT PARTS LIST ................................................................................................. 16

PC BOARDS TOP & BOTTOM VIEW ............................................................................... ................................................ 23

BLOCK DIAGRAM ............................................................................................................................................................. 37

APPENDIX:

SCHEMATIC DIAGRAM

GENERAL ADJUSTMENTS

SPECIFIC INFORMATIONS

SERVICE SAFETY PRECAUTIONS

• The caution items shown here describe major safety issues and should always be observed.

• The meanings of the various indications are as follows.

WARNING

CAUTION

Indicates a hypothetical situation in which service personnel and nearby third parties, or even

end users due to a product defect after the service operation is completed, could possibly be in

danger of injury or even death in the event of operational error.

Indicates a hypothetical situation in which service personnel and nearby third parties, or even

end users after the service operation is completed, could possibly be in danger of injury, or

where there could be physical damage in the event of operational error.

* Physical damage means major damage to a home, furnishings and other possessions.

Examples of marks

SHOCK HAZARD

PROHIBIT DISASSEM-

BLING

UNPULUG

The

indicates caution (including danger and warning).

The actual meaning of this caution is indicated inside the

or nearby illustrations or text.

The example shown to the left indicates the danger of "electrical shock".

The indicates a forbidden action.

The actual meaning of this caution is indicated inside the or nearby illustrations or text.

The example shown to the left indicates that disassembly is forbidden.

The -indicates a forced action (an action that must be performed).

The actual meaning of this forced action is indicated by -or nearby illustrations or text.

The example shown to the left indicates that the power plug must be disconnected.

GENERAL ADJUSTMENTS

SPECIFIC INFORMATIONS

WARNING

KEEP CHILDREN

AWAY

UNPULUG

SHOCK HAZARD

USE SPECIFIED

PARTS

CAUTION FOR

WIRING

CAUTION FOR

ASSEMBLING /

WIRING

CHECK INSULATION

RESISTANCE

PROHIBIT

REMODELING

• Always advise users to keep children away.

There is danger of injury to children from tools, disassembled products, etc.

• Always disconnect the power plug before starting work whenever power is not required.

Failure to disconnect the power plug before starting work can result in electrical shock.

• Depending on the model, use an insulation transformer or wear gloves when servicing with the

power on, and disconnect the power plug to avoid electrical shock when replacing parts.

In some cases, alternating current is also impressed in the chassis, so electrical shock is pos-

sible if the chassis is contacted with the power on.

• Always use the replacement parts specified for the particular model when making repairs.

The parts used in products have the necessary safety characteristics such as inflammability,

voltage resistance, etc.; therefore, use only replacement parts that have these same character-

istics.

Use only the specified parts when the mark is included in a circuit diagram or parts list.

• Parts mounting and routing of the wiring should be the same as that used originally.

For safety purposes, insulating materials such as tubing or tape is sometimes used and printed

circuit boards are sometimes mounted floating.

Also make sure that wiring is routed and clamped to avoid parts that generate heat and which

use high voltage. Always follow the original scheme.

• After a repair has been completed, reassemble all disassembled parts, and route and recon-

nect the wiring, in accordance with the original scheme.

Do not allow internal wiring to be pinched by cabinets, panels, etc.

Any error in reassembly or wiring can result in electrical leakage, flame, etc., and may be

hazardous.

• After completing the work, disconnect the power plug from the outlet, remove the antenna, turn

on the power switch. Then, use a 500V insulation resistance meter to check the insulation

resistance of the antenna terminal, other metallic parts and between the prongs of the power

plug to make sure that the insulation resistance is 1M 1or more.

The set will require inspection and repair if the insulation resistance is below this value.

• Never remodel the product in any way.

Remodeling can result in improper operation, malfunction, or electrical leakage and flame,

which may be hazardous

GENERAL ADJUSTMENTS

SPECIFIC INFORMATIONS

HANDLING THE LCD MODULE

Safety Precautions

In the event that the screen is damaged or the liquid crystal

(fluid) leaks, do not breathe in or drink this fluid. Also, never

touch this fluid.

Such actions could cause toxicity or skin irritation. If this fluid

should enter the mouth, rinse the mouth thoroughly with wa-

ter. If the fluid should contact the skin or clothing, wipe off

with alcohol, etc., and rinse thoroughly with water. If the fluid

should enter the eyes, immediately rinse the eyes thoroughly

with running water.

Precautions for Handling the LCD Module

The LCD module can easily be damaged during disassembly

or reassembly; therefore, always observe the following pre-

cautions when handling the module.

1. When attaching the LCD module to the LCD cover, posi-

tion it appropriately and fasten at the position where the

display can be viewed most conveniently.

2. Carefully align the holes at all four corners of the LCD

module with the corresponding holes in the LCD cover

and fasten with screws. Do not strongly push on the mod-

ule because any impact can adversely affect the perform-

ance. Also use caution when handling the polarized screen

because it can easily be damaged.

CAUTION The metal edges of the LCD module

are sharp, so use caution to avoid in-

jury.

3. If the panel surface becomes soiled, wipe with cotton or a

soft cloth. If this does not remove the soiling, breathe on

the surface and then wipe again.

If the panel surface is extremely solied, use a CRT cleaner

as a cleaner. Wipe off the panel surface by drop the cleaner

on the cloth. Do not drop the cleaner on the panel. Pay

attention not to scratch the panel surface.

4. Leaving water or other fluids on the panel screen for an

extended period of time can result in discoloration or

stripes. Immediately remove any type of fluid from the

screen.

5. Glass is used in the panel, so do not drop or strike with

hard objects. Such actions can damage the panel.

6. CMOS-LSI circuitry is used in the LCD module, so avoid

damage due to static electricity. When handling the mod-

ule, use a wrist ground or anchor ground.

GENERAL ADJUSTMENTS

SPECIFIC INFORMATIONS

7. Do not expose the LCD module to direct sunlight or strong

ultraviolet rays for an extended period of time.

8. Do not store the LCD module below the temperature con-

ditions described in the specifications. Failure to do so

could result in freezing of the liquid crystal due to cold air

or loss of resilience or other damage.

9. Do not disassemble the LCD module. Such actions could

result in improper operation.

10. When transporting the LCD module, do not use packing

containing epoxy resin (amine) or silicon resin (alcohol or

oxim). The gas generated by these materials can cause

loss of polarity.

SERVICE MODE

ENTERING TO SERVICE MODE

1) Press the "MUTE" button once on the remote control, "1/2 MUTE" is displayed on the screen.

2) Press the "MUTE" button again, "MUTE" is displayed on the screen.

3) Press the "MENU" button on the TV while pressing the "MUTE" button on the remote control, "S" may appear

on the screen. Then enter to the service mode.

4) Press the "MENU" button on the remote control, adjustment item appears on the screen.

NOTE

Adjustment items may change by pressing the "CH " buttons on the remote control.

1) 2) 3) 4)

* EXIT FROM SERVICE MODE-Turn off the "POWER" of the TV or remote control.

Built-in signal

.When press the "INPUT" source selection button on the remote controller during service mode,

generate the built-in test video signal for servicing.

Built-in test video signal (Use for the adjustment such as white balance, etc.)

General broadcasting signal => red monochrome => green monochrome

=> blue monochrome => white signal => black cross bar => built-in signal OFF

CAUTION

For the video system adjustment, never attempt to initialize the data unless initial setting data is exceed

incorrectly.

Adjustment items

Brightness correction

(BRTC)

White balance

(RCUT) (GCUT) (BCUT)

Adjustment procedure

1) Receive a general broadcasting program, then press "MENU" button on the

remote control, set the unicolor to minimum (00) and brightness to standard (00)

in order to display the "Setting menu" => "Picture setting" => "Picture adjust-

ment" by pressing the cursor buttons " ".

2) Select BRTC (brightness correction) using the cursor buttons "CH " on the

remote control, fine adjust the black signal to be black using the "VOL "

buttons on the remote control. After the adjustment, set "unicolor" back to

initialize data.

1) Enter the service mode, press the "INPUT" source setting button on the remote

control to generate the built-in white signal.

2) Adjust the data of items RCUT, GCUT and BCUT for proper white-balanced

picture in low light area.

* For high light area, GDRV and RDRV items can be adjusted for proper white-balanced picture.

1/2 mute mute

SRCUT

60H

(Service mode screen)

TROUBLESHOOTING DIAGNOSIS FUNCTION

1. DIAGNOSIS FUNCTION FOR LED INDICATION

High : Lighting Low : No Lighting

CAUSE

Short-circuit detection of BUS line

BUS line may possibly be short-circuit (SDA to SCL), or BUS line (SDA,

SCL) is grounded.

Overcurrent limiter detection

POWER terminal on TV microprocessor becomes LOW at 2 seconds or

more.

Interruption of FAN motor function detection

No. 53 terminal on TV microprocessor becomes HIGH for 30 seconds.

Abnormal sound detection

P4 terminal of QS10 becomes LOW for 15 seconds during Speaker is

activated.

LED

LED is lit in 1 second at

intervals of 1 second.

LED is lit in 0.5 at intervals

of 0.5 second.

LED is lit in 0.25 second at

intervals of 2 second.

LED is lit in 5 seconds at

intervals of 5 seconds.

2. SELF DIAGNOSIS FUNCTION

1) Press "9" button on the remote control during display of adjustment menu in the service mode.

2) During diagnosis, the following displays are shown.

Part number of microprocessor (8 digits)

Operation number of protecting circuit ------"000" is normal.

When indication is other than "000", overcurrent is apt to flow, and circuit parts may possibly be dam-

aged.

BLOCK

MAIN : Main picture display --Green indication

Main picture does not display--Red indication

SUB : Sub picture display --Green indication

Sub picture does not display--Red indication

ID code for TV set

Software version information for E2P

Data number of OPT1 and OPT2

Software version history of host microprocessor (date indication)

HDMI NO: Serial No. of HDMI software (8digits)

HDMI ERR CODE: HDMI error code number

BEP SW VER: Software version information for BEP microprocessor

BEP E2P VER: Software version information for BEP E2P

Total hour of TV set on time (6digits). (Unit: hour)

*INITIALIZATION OF SELF DIAGNOSIS DATA

1) Enter the service mode, then select any register item.

2) Press and hold the RECALL button on the remote control, then press the CHANNEL up button on the TV. The

initialization has been completed.

NO. 23

******

POWER : 000 TIME

BUS LINE : OK TV : 00

****

BUS CONT : OK

BLOCK : MAIN SUB

SET ID : A0

E2P VER : 00

OPT1 : 01 OPT2 : A0

SW VER : PD SEP 01 2004 10:05:50

HDMI BEP

NO.

********

SW VER : 74

ERR CODE : 00 E2P VER : 00

BUS LINE ------ "OK" is normal.

---- "SCL-GND" or "NG" ------- SCL-GND short circuit

---- "SDA-GND" or "NG" ------- SDA-GND short circuit

---- "SCL-SDA" or "NG" ------ SCL-SDA short circuit

BUS CONT ------ "OK" is normal.

When indication shows "Q uuu (Green: OK, Red: NG)", the device with the number may possibly be

damaged.

LAYOUT OF MAJOR BOARDS

U001

SIGNAL BOARD

U004

POWER-SW BOARD

U006

LOWB-AOUT BOARD

U003

LED/RMT BOARD

U800

POWER UNIT

U002

FRONT-AV BOARD

U008

SCALER BOARD

U007

KEY-SW BOARD

Andere Handbücher für 32HLX84

Inhaltsverzeichnis

Andere Toshiba LCD-Fernseher Handbücher

Toshiba

Toshiba 40LV655P Bedienungsanleitung

Toshiba

Toshiba 37WLT67 Bedienungsanleitung

Toshiba

Toshiba 43V58 Series Bedienungsanleitung

Toshiba

Toshiba 32DL66Ps Bedienungsanleitung

Toshiba

Toshiba 24d1334g Einrichtungshandbuch

Toshiba

Toshiba Regza 42LX196 Bedienungsanleitung

Toshiba

Toshiba 40FT1U Bedienungsanleitung

Toshiba

Toshiba 22AV60U Bedienungsanleitung

Toshiba

Toshiba 14VL44 Series Bedienungsanleitung

Toshiba

Toshiba 37AV52R - 37" LCD TV Bedienungsanleitung

Toshiba

Toshiba 19AV73 G Series Bedienungsanleitung

Toshiba

Toshiba RV55* Digital Series Bedienungsanleitung

Toshiba

Toshiba 32A3500E Bedienungsanleitung

Toshiba

Toshiba 24PB1E Bedienungsanleitung

Toshiba

Toshiba 42HL196 - 42" LCD TV Bedienungsanleitung

Toshiba

Toshiba 19AV51U - 19" LCD TV Bedienungsanleitung

Toshiba

Toshiba 42HL833F Bedienungsanleitung

Toshiba

Toshiba 37AV600E - REGZA -37" HD Ready LCD MultiSystem TV... Bedienungsanleitung

Toshiba

Toshiba REGZA 32RV530U Bedienungsanleitung

Toshiba

Toshiba 40L54 Series Bedienungsanleitung

Toshiba

Toshiba 40RV52R Bedienungsanleitung

Toshiba

Toshiba 32AV500U - 32" LCD TV Bedienungsanleitung

Toshiba

Toshiba 37ZV635D Bedienungsanleitung

Toshiba

Toshiba Regza 55ZV650U Bedienungsanleitung

Beliebte LCD-Fernseher Handbücher anderer Marken

LG 32LC4R* Bedienungsanleitung

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Runco

Runco CX-52HD Bedienungsanleitung

Sharp

Sharp LC-32AX3H Bedienungsanleitung

Philips

Philips 47PFL7704D Bedienungsanleitung

Vizio

Vizio VO42LFHDTV10A Bedienungsanleitung

Philips

Philips 42PF7520D/79 Bedienungsanleitung

Insignia

Insignia NS-LCD32-09 Bedienungsanleitung

Sony

Sony WEGA KLV-27HR3 Bedienungsanleitung

Nexus

Nexus NX32031 Bedienungsanleitung

Zenith

Zenith Z32LC2D Bedienungsanleitung

Sony

Sony KDL-32S3000R - 32" Class Bravia S-series Digital Lcd... Bedienungsanleitung

Medion

Medion MEDION LIFE X14330 Bedienungsanleitung

Vizio

Vizio HDTV30A VW32L Bedienungsanleitung

Sharp

Sharp LC-24DV250K Bedienungsanleitung

SOYO

SOYO Dymond DYLT032A Bedienungsanleitung