Toshiba 65L7350U Bedienungsanleitung

Leading innovation

IntegratedHighDefinitionLED

TelevisionUser'sGuide:

58L7350U/65L7350U

If you need assistance:

Toshiba's Support Web site support.toshiba.corn

For more information, see "Troubleshooting" on page 173 in this guide.

Owner's Record

The model number and serial number are on the back and side of your television.

Record these numbers, whenever you communicate with your Toshiba dealer about

this Television.

Model name:

Serial number:

Note: To display a High Definition

picture, the TV must be receiving a

High Definition signal (such as an over-

the-air High Definition TV broadcast, a

High Definition digital cable program,

or a High Definition digital satellite

program). For details, contact your TV

antenna installer, cable provider, or

satellite provider GMA300020011

3/13

Chapter7

PictureandSound

Controls

Selectingthepicturesize

You can view many program formats in several picture sizes-- Native, 4:3,

Full, TheaterWide 1, TheaterWide 2, TheaterWide 3, Normal, and Dot by

Dot.

NOTN o**oThepicturesizeillustrationsareexamplesonly.Theformatofthe

image(inanyofthepicturesizes)dependsontheformatofthesignal

youarecurrentlywatching.Selectthepicturesizethatdisplaysthe

currentprograminthewaythatlooksbesttoyou.

¢ Usingthesefunctionstochangethepicturesize(i.e.,changingthe

height/widthratio)foranypurposeotherthanyourprivateviewing

maybeprohibitedundertheCopyrightLawsoftheUnitedStatesand

othercountries,andmaysubjectyoutocivilandcriminalliability.

¢ Somepicturesizesmaynotbeavailabledependingontheformatof

thesignalbeingreceived.

¢ IfyouselectaTheaterWide®picturesize,thetopandbottomedgesof

thepicture(includingsubtitlesorcaptions)maybehidden.Toview

theseedges,adjustthePicturePositionortryviewingtheprogramin

4:3orFull,see"Scrollingthepicture"onpage108.

104

Picture and SoundControls 1 05

Selecting the picture siz

You can save separate picture size preferences for each input on your TV.

To select the picture size using the Quick menu:

1 Press the QUICK button to open the Quick menu.

2Select Picture Size, andthen press the OK button.

3 Press the A/V (arrow) buttons to select the Picture Size, and then

press the OK button.

NOTN Whenin2Dto 3Dmode,3Dmode,or2Dmode,PictureSizedoesnot

appearin theQuickmenu.

Native NodeTM

This applies pixel-for-pixel image reproductions of Full HD content and

eliminating overscanning; you see all of the original picture within the

screen and eliminate scaling artifacts for a more accurate image.

These settings are for viewing in 480i (HDMIT'), 480p (HDMI'M), 720p,

1080i, and 1080p signal programs.

o OOO

(Sample Illustration) Picture size -Nadve Mode TM

o:. If receiving a1080i, 1080p, 720p, 480i (HDMI'M),or 480p (HDMI TM)

signal program, the video is scaled to display the entire picture

within the borders of the screen (i.e. no overscanning).

.l. This is especially useful for external HD sources such as DVHS

movies, video games, or computer graphics.

°.*oNone of the picture is hidden.

NQTN o:. Thismodeis supportedonlyforHDMITM (10801,1080p,720p,4801,

and480p),ColorStream®(1080iand720p),andANT/CABLE(digital)

inputs(1080i,1080p,and720p).

•:. Dependingontheinputsignal,thepicture'sbordermaybehidden,

displayedin black,or noisy.

106 Picture and Sound Controls

Selecting the picture siz

4:3

0 000

ooo O0

oo O0

(Sample Illustration) Picture size -4:3

Some program formats will display with sidebars and/or bars at the top

and bottom.

Full

This setting is for viewing in the 16:9 (480i, 480p) source programs only.

I °°11°°°1

00_000

(Sample Illustration) Picture size -Full 16:9

If receiving asqueezed 4:3 format program, the picture is stretched

horizontally to fill the width of the screen but not stretched vertically.

This setting is for viewing in the 1080i, 1080p, and 720p program source.

iooollooo

000=>000

(Sample Illustration) Picture size -Full

The edges of the picture may be hidden.

Picture and SoundControls 107

Selecting the picture size

TheaterWidel

This setting is for viewing in 4:3 format programs.

(Sample Illustration) Picture s&e- TheaterWidel

The center of the picture remains close to its original proportions, but the

left and right edges are stretched horizontally to fill the screen.

TheaterWide2

This setting is for viewing letter box programs.

©©©

(Sample Illustration) Picture s&e- TheaterWide2, letter box

The picture's top and bottom edges may be hidden*.

TheaterWide3

This setting is for viewing letter box programs with subtitles.

k J.......

(Sample Illustration) Picture size -TheaterWide 3, letter box with

subtitles

The picture's top and bottom edges are hidden*.

108 Picture and Sound Controls

Scrolling the pictur

Normal

This setting is for viewing SVGA, XGA, WXGA, and SXGA sources.

iooooo1ooo

0 000

(Sample Illustration) Picture size -Nornud

This size is anon-stretched display. Some input signal formats will

display with sidebars and/or bars atthe top and bottom.

Dotby Dot

This setting is for viewing SVGA, XGA, WXGA, and SXGA sources.

(Sample Illustration) Picture size -Dot by Dot

"Dot by Dot" is anon-scaling display. Depending on the input signal

format, the picture appears with sidebars and/or bars atthe top and

bottom, for example, SVGA input source.

*To view the hidden areas (such as subtitles or captions), see "Scrolling

the picture" on page 108.

Scrollingthepicture

If the edges of the picture are hidden, you can adjust the image's position.

NOTN .*.. Youcanadjustthepicturepositionwhenthepicturesizeissetto

TheaterWide2or TheaterWide3.

•".. WhenviewingCloudTV,MediaShareorInternetcontentthisfeatureis

notavailable.

1Press the SETUP button.

2Select Picture >Display Settings > Picture Position and press the

OK button.

3 Press the &/V (arrow) buttons to select Vertical Position and press

the OK button.

4 Press the "_/1_ (arrow) buttons to make the appropriate adjusnnents.

The adjustment range is from -5 to +10.

Picture and Sound Controls 109

Using the Auto Aspect featur

UsingtheAutoAspectfeature

When this feature is set to On, the TV will automatically select the picture

size when one of the following input sources is received:

o*,o480i, 480p, 720p, 1080i digital signal from the ANT/CABLE input

°_o 480i, 480p, 720p, 1080i, 1080p, or VGA (60/72/75 Hz) signal from

the HDMI TM 1/2/3/4 input

NOTE TheautoaspectratiofeatureisnotapplicabletothePCinput.

1 Press the SETUP button.

2 Select Picture > Display Settings > Auto Aspect and press the OK

button.

3 Press the A/V (arrow) buttons to select On.

4 Press the EXIT button.

Usingthe4:3Stretch

When 4:3 Stretch is activated, the TV displays 4:3 programs as a full-

screen picture.

NOTN ThisfeatureisavailablewhenAutoAspectissettoOn.

1 Press the SETUP button.

2 Select Picture > Display Settings > 4:3 Stretch and press the OK

button.

3 Press the A/V (arrow) buttons to select On.

4 Press the EXIT button.

1 1 0 Picture and Sound Controls

Adjusting the pictur

Adjustingthepicture

Selectingthepicturemode

You can select your desired picture settings from the modes described

below.

Mode: Description:

AutoView_ AutomaticallyadjustsmultiplepicturesettingsincludingBrightness,

Contrast,Gamma,andSharpnessbasedonambientroomlightconditions

andincomingpicturecontenttocreatethebestpossiblepicturesettings

withoutanymanualadjustment.

Dynamic MaximizesContrast,ColorSaturation,Sharpness,GrayScaleand

Brightnesstocreatemorevividanddynamicimages

Standard Standardpicturesettings

Movie Lowercontrastfora darkenedroom

Game Optimizedforplayingvideogamesbydisplayingtheimagesin their

purestform(4:4:4)withoutthelossofcolorinformation.Theresultis

superiorimagequalityandshortersignaltoscreentimeforafastergaming

experience.

PC Optimizedforviewingyourpersonalcomputer.

NOTN o:, PCmodeisavailableforHDMI'_andPCinputsonly(notdisplayedfor

otherinputsources).

•:, GameModeisnotavailablein ANT/CABLEinput.

1Press the SETUP button.

2 Select Picture >Picture Mode and press the OK button.

3 Press the ,&/V (arrow) buttons to select a mode.

4 Press the EXIT button.

*_o The picture mode can also be changed by pressing the PIC MODE

button on the remote control.

NOTN Thepicturemodeyouselectaffectsthecurrentinputonly.Youcanselecta

differentpicturemodeforeachinput.

Picture and Sound Controls 1 1 1

Adjusting the pictur

Adjustingthepicturequality

The adjustments you make to picture quality under a picture mode are

saved to that picture mode.

Selection Press (_I) Press (1_)

Backlight* Darker Lighter

Contrast Lower Higher

Brightness Darker Lighter

Color Paler Deeper

Tint Reddish Greenish

Sharpness Softer Sharper

*Backlight: Adjusts the brightness of the entire screen. When in video mode and

no signal is input, this selection is set to 0. (Settings are stored in memory.)

NOTN Somesettingscannotbeadjustedwhenthepicturemodeissetto

AutoView.

To adjust the picture quality:

1 Press the SETUP button.

2 Select Picture and press the OK button.

3 Press the A/V (arrow) buttons to select the setting you would

like to adjust (Backlight, Contrast, Brightness, Color, Tint, or

Sharpness).

4 Press the I* (arrow) button.

5 Press the "ql/l*(arrow) buttons to adjust the setting.

6 Press the EXIT button.

NO'rN o:oAnypicturesettingsthatyouadjustaffectthecurrentinputonly.

Youcanadjustthepicturequalityseparatelyforeachinput.

•:. Dependingona Sharpnessvalue,theEdgeEnhancereffectmaybe

reduced.

To reset to the factory defaults:

1 Press the SETUP button.

2 Select Picture > Reset.

3 Press the OK button.

A confirmation screen appears.

4 Press the "_/1_ (arrow) buttons to select Yes, and then press OK.

1 1 2 Picture and Sound Controls

Using the advanced picture settings feature

Usingtheadvancedpicturesettingsfeatures

NOTE SomeoftheAdvancedPictureSettingsfeatureswill notbeavailablefor

adjustmentwhenthepicturemodeis settoAutoView.

EdgeEnhancer

If the Edge Enhancer set to On, the clarity levels can be adjusted

automatically.

1Press the SETUP button.

2 Select Picture > Advanced Picture Settings > Edge Enhancer

and press the OK button.

3Press the A/V (arrow) buttons to select On.

4 Press the EXIT button.

NOTE o:. IfthepicturemodeissettoAutoView,EdgeEnhancerisnot

available.

•".. Thisfeaturemaynotworkproperlydependingonthecontent.

•".. Noisemayappearontheimagedependingonthedeviceconnectedto

theTV(e.g.adevicewithaspecificenhancerfunction).

DynamicContrast

Dynamic Contrast detects changes in picture quality that affect the

appearance of your contrast settings and then automatically adjusts the

video.

1 Press the SETUP button.

2Select Picture >Advanced Picture Settings > Dynamic Contrast

and press the OK button.

3 Press the A/V (arrow) buttons to select High, Middle, Low, or

Off.

4 Press the EXIT button.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba LED-Fernseher Handbücher

Toshiba

Toshiba TD-E502 Bedienungsanleitung

Toshiba

Toshiba 50L7300U Firmware-Update

Toshiba

Toshiba 40L310U QSG Bedienungsanleitung

Toshiba

Toshiba 39L4300 Series Bedienungsanleitung

Toshiba

Toshiba 32L5660* Series Bedienungsanleitung

Toshiba

Toshiba 32L2200U Firmware-Update

Toshiba

Toshiba 23L2300UC Firmware-Update

Toshiba

Toshiba 32S255 Series Bedienungsanleitung

Toshiba

Toshiba 32L1400U Bedienungsanleitung

Toshiba

Toshiba 32L5995 Series Bedienungsanleitung

Toshiba

Toshiba 32L4200U Montageanleitung

Toshiba

Toshiba 40UL3063DB Bedienungsanleitung

Toshiba

Toshiba L9400U Series Bedienungsanleitung

Toshiba

Toshiba 50UA3D63DG Bedienungsanleitung

Toshiba

Toshiba 32L1343 DG Einrichtungshandbuch

Toshiba

Toshiba 43LF621U19 Gebrauchsanweisung

Toshiba

Toshiba 32L220U19 Bedienungsanleitung

Toshiba

Toshiba 19L4200U Bedienungsanleitung

Toshiba

Toshiba 50U7950 Series Bedienungsanleitung

Toshiba

Toshiba 55UL3063DB Bedienungsanleitung

Toshiba

Toshiba 75C350KU Bedienungsanleitung

Toshiba

Toshiba 43U2063DB Bedienungsanleitung

Toshiba

Toshiba 32L1400U Firmware-Update

Toshiba

Toshiba 50QF5D53DB Bedienungsanleitung

Beliebte LED-Fernseher Handbücher anderer Marken

LG 43UF680T-TA Bedienungsanleitung

SWEDX

SWEDX SS-42K15 Bedienungsanleitung

Akai

Akai LT-3222AD Bedienungsanleitung

LG 55UR640S Kurzanleitung

Bush

Bush DLED55UHDSFIRE Bedienungsanleitung

Philips

Philips 32PFL3078K/12 Bedienungsanleitung

LG 86UK6570PU Series Bedienungsanleitung

LG LX34 SERIES Bedienungsanleitung

LG 43LU660H Bedienungsanleitung

Hyundai

Hyundai H-LED2202-F Bedienungsanleitung

Sansui

Sansui SLED1928 Bedienungsanleitung

LG 22LY540M Bedienungsanleitung

Philips

Philips 50PUN7625/61 Bedienungsanleitung

Berkshire

Berkshire 26LEDF3200B Bedienungsanleitung

Philips

Philips 22PFL4507 Bedienungsanleitung

LG LB61 Series Bedienungsanleitung

Quasar

Quasar SQ3208 Bedienungsanleitung

Allview

Allview 32ATC6000-H Bedienungsanleitung