Toshiba 42HP95 - 42" Plasma TV Bedienungsanleitung

SERVICE MANUAL

Plasma Color Television

42HP95

50HP95

FILE NO. 020-200517

Published in Japan, Sep. 2005 (YC)

TOSHIBA CORPORATION 2005

TABLE OF CONTENTS

SERVICE SAFETY PRECAUTIONS .................................................................................................................................... 3

HANDLING THE LCD MODULE .......................................................................................................................................... 5

SERVICE MODE .................................................................................................................................................................. 7

LAYOUT OF MAJOR BOARDS .......................................................................................................................................... 12

MECHANICAL DISASSEMBLY .......................................................................................................................................... 13

EXPLODED VIEW .............................................................................................................................................................. 15

PACKING DISASSEMBLY ................................................................................................................................................. 17

CHASSIS AND CABINET REPLACEMENT PARTS LIST ................................................................................................. 18

PC BOARDS TOP & BOTTOM VIEW ................................................................................................................................ 25

CIRCUIT BLOCK DIAGRAM .............................................................................................................................................. 48

APPENDIX:

SCHEMATIC DIAGRAM

GENERAL ADJUSTMENTSSPECIFIC INFORMATIONS

SERVICE SAFETY PRECAUTIONS

• The caution items shown here describe major safety issues and should always be observed.

• The meanings of the various indications are as follows.

WARNING

CAUTION

Indicates a hypothetical situation in which service personnel and nearby third parties, or even

end users due to a product defect after the service operation is completed, could possibly be in

danger of injury or even death in the event of operational error.

Indicates a hypothetical situation in which service personnel and nearby third parties, or even

end users after the service operation is completed, could possibly be in danger of injury, or

where there could be physical damage in the event of operational error.

* Physical damage means major damage to a home, furnishings and other possessions.

Examples of marks

SHOCK HAZARD

PROHIBIT DISASSEM-

BLING

UNPULUG

The

indicates caution (including danger and warning).

The actual meaning of this caution is indicated inside the

or nearby illustrations or text.

The example shown to the left indicates the danger of "electrical shock".

The indicates a forbidden action.

The actual meaning of this caution is indicated inside the or nearby illustrations or text.

The example shown to the left indicates that disassembly is forbidden.

The

indicates a forced action (an action that must be performed).

The actual meaning of this forced action is indicated by

or nearby illustrations or text.

The example shown to the left indicates that the power plug must be disconnected.

WARNING

KEEP CHILDREN

AWAY

UNPULUG

SHOCK HAZARD

USE SPECIFIED

PARTS

CAUTION FOR

WIRING

CAUTION FOR

ASSEMBLING /

WIRING

CHECK INSULATION

RESISTANCE

PROHIBIT

REMODELING

• Always advise users to keep children away.

There is danger of injury to children from tools, disassembled products, etc.

• Always disconnect the power plug before starting work whenever power is not required.

Failure to disconnect the power plug before starting work can result in electrical shock.

• Depending on the model, use an insulation transformer or wear gloves when servicing with the

power on, and disconnect the power plug to avoid electrical shock when replacing parts.

In some cases, alternating current is also impressed in the chassis, so electrical shock is pos-

sible if the chassis is contacted with the power on.

• Always use the replacement parts specified for the particular model when making repairs.

The parts used in products have the necessary safety characteristics such as inflammability,

voltage resistance, etc.; therefore, use only replacement parts that have these same character-

istics.

Use only the specified parts when the mark is included in a circuit diagram or parts list.

• Parts mounting and routing of the wiring should be the same as that used originally.

For safety purposes, insulating materials such as tubing or tape is sometimes used and printed

circuit boards are sometimes mounted floating.

Also make sure that wiring is routed and clamped to avoid parts that generate heat and which

use high voltage. Always follow the original scheme.

• After a repair has been completed, reassemble all disassembled parts, and route and recon-

nect the wiring, in accordance with the original scheme.

Do not allow internal wiring to be pinched by cabinets, panels, etc.

Any error in reassembly or wiring can result in electrical leakage, flame, etc., and may be

hazardous.

• After completing the work, disconnect the power plug from the outlet, remove the antenna, turn

on the power switch. Then, use a 500V insulation resistance meter to check the insulation

resistance of the antenna terminal, other metallic parts and between the prongs of the power

plug to make sure that the insulation resistance is 1M 1or more.

The set will require inspection and repair if the insulation resistance is below this value.

• Never remodel the product in any way.

Remodeling can result in improper operation, malfunction, or electrical leakage and flame,

which may be hazardous

GENERAL ADJUSTMENTSSPECIFIC INFORMATIONS

HANDLING THE LCD MODULE

Safety Precautions

In the event that the screen is damaged or the liquid crystal

(fluid) leaks, do not breathe in or drink this fluid. Also, never

touch this fluid.

Such actions could cause toxicity or skin irritation. If this fluid

should enter the mouth, rinse the mouth thoroughly with wa-

ter. If the fluid should contact the skin or clothing, wipe off

with alcohol, etc., and rinse thoroughly with water. If the fluid

should enter the eyes, immediately rinse the eyes thoroughly

with running water.

Precautions for Handling the LCD Module

The LCD module can easily be damaged during disassembly

or reassembly; therefore, always observe the following pre-

cautions when handling the module.

1. When attaching the LCD module to the LCD cover, posi-

tion it appropriately and fasten at the position where the

display can be viewed most conveniently.

2. Carefully align the holes at all four corners of the LCD

module with the corresponding holes in the LCD cover

and fasten with screws. Do not strongly push on the mod-

ule because any impact can adversely affect the perform-

ance. Also use caution when handling the polarized screen

because it can easily be damaged.

CAUTION The metal edges of the LCD module

are sharp, so use caution to avoid in-

jury.

3. If the panel surface becomes soiled, wipe with cotton or a

soft cloth. If this does not remove the soiling, breathe on

the surface and then wipe again.

If the panel surface is extremely solied, use a CRT cleaner

as a cleaner.Wipe off the panel surface by drop the cleaner

on the cloth. Do not drop the cleaner on the panel. Pay

attention not to scratch the panel surface.

4. Leaving water or other fluids on the panel screen for an

extended period of time can result in discoloration or

stripes. Immediately remove any type of fluid from the

screen.

5. Glass is used in the panel, so do not drop or strike with

hard objects. Such actions can damage the panel.

6. CMOS-LSI circuitry is used in the LCD module, so avoid

damage due to static electricity. When handling the mod-

ule, use a wrist ground or anchor ground.

7. Do not expose the LCD module to direct sunlight or strong

ultraviolet rays for an extended period of time.

8. Do not store the LCD module below the temperature con-

ditions described in the specifications. Failure to do so

could result in freezing of the liquid crystal due to cold air

or loss of resilience or other damage.

9. Do not disassemble the LCD module. Such actions could

result in improper operation.

10. When transporting the LCD module, do not use packing

containing epoxy resin (amine) or silicon resin (alcohol or

oxim). The gas generated by these materials can cause

loss of polarity.

CAUTION : Never try to perform initialization unless you have changed the memory IC.

SERVICE MODE

1. ENTERING SERVICE MODE

1) Press MUTE button twice on 2) Press MUTE button again and 3) While pressing the MUTE button,

Remote Control. keep pressing. press MENU button on TV set.

(Service mode display)

2. DISPLAYING THE ADJUSTMENT MENU

1) Press MENU button on Remote Control.

Service mode Adjustment mode

3. KEY FUNCTION IN THE SERVICE MODE

The following key entry during display of adjustment menu provides special functions.

Press

MUTE

Test signal selection : TV/VIDEO button (on Remote)

Selection of the adjustment items : Channel / (on TV or Remote)

Change of the data value : Volume W/ X(on TV) or / (on Remote)

Adjustment menu mode ON/OFF : MENU button (on Remote)

Initialization of the memory : CALL + Channel button on TV ( )

Reset the count of operating protect circuit to “00” :

CALL + Channel button on TV ( )

“RCUT” selection : 1 button

“GCUT” selection : 2 button

“BCUT” selection : 3 button

“CNTX” selection : 4 button

“COLC” selection : 5 button

“UVTT” selection : 6 button

Automatic A/D Adjustment(PC, Component) : 7 button

Self diagnostic display ON/OFF : 9 button

-----

Color thickness correction

note: Displayed differently as shown below, depending

on the setting of the receiving color system.

COLP (PAL)

COLC (NTSC)

COLS (SECAM)

Signals Picture

• Red raster

• Green raster

• Blue raster

• All Black

• All White

All BlackAll White

BSignal off G

4. SELECTING THE ADJUSTING ITEMS

1) Every pressing of CHANNEL button in the service mode changes the adjustment items in the order of table-2.

(button for reverse order)

5. ADJUSTING THE DATA

1) Pressing of VOLUME W/ X, / button will change the value of data in the range from 00H to FFH. The

variable range depends on the adjusting item.

6. EXIT FROM SERVICE MODE

1) Pressing POWER button to turn off the TV once.

INITIALIZATION OF MEMORY DATA

After replacing EEPROM IC, the following initialization is required.

1. Enter the service mode, then select any register item.

2. Press and hold the CALL button on the Remote, then press the CHANNEL button on the TV. The initialization of

EEPROM IC has been completed.

3. Check the picture carefully. If necessary, adjust any adjustment item above.

Perform “Auto tune” on the owner’s manual.

CAUTION: Never attempt to initialize the data unless EEPROM IC has been replaced.

7. TEST SIGNAL SELECTION

1) Every pressing of TV/VIDEO button on the Remote Control changes the built-in test patterns on screen as described

below in SERVICE MODE.

8. SELF DIAGNOSTIC FUNCTION

1) Press “9” button on Remote Control during display of adjustment menu in the service mode.

The diagnosis will begin to check if interface among IC’s is executed properly.

2) During diagnosis, the following displays are shown.

000000

42HP95_1593

1Firmware :

Version information of microprocessor

In case of file name : 42HP95 and Version : 1593 indicates[42HP95_1593].

2Time : Total hour of turn the TV on. (Unit : H)

3Bus line : --"OK" is normal

"SCL-GND"(Red indication) : SCL-GND short circuit

"SDA-GND"(Red indication) : SDA-GND short circuit

"SCL-SDA"(Red indication) : SCL-SDA short circuit

4Bus cont : --- "OK" is normal.

NG is abnormal(Red indication).

When type name of semiconductor indicates.

5Block

UV : TV reception mode

V1 : VIDEO 1 input mode

V2 : VIDEO 2 input mode

V3 : VIDEO 3 input mode

V4 : ColorStream HD 1

V5 : ColorStream HD 2

V6 : HDMI

PC : Personal Computer (PC)

9. VERSION CHECK MODE

1) Press “9” button twice on Remote Control during display of adjustment menu in the service mode. The version of main

MPU will begin to check.

2) During Version Check, the following displays are shown.

42HP95_1593(U15)

74 00 01 25 00 00

00000155

MN-42

1MAIN MPU :

Version information of microprocessor

In case of file name : 42HP95, Version 1593 for Code Program Version

and (U15) for OSD Version indicates [42HP95_1593(U15)]

2EEPROM :

Version information of EEPROM : Display 1 byte data.

3SUB MPU :

Version information of SUB MPU : Display 1 byte data.

4OPTION :

Option information : Display six numbers of 1 byte data.

5HDMI ID :

HDMI ID information : Display 4 byte data.

6PDP Panel Vender information display

The following Panel Vender and screen size are displayed.

Panel Vender Screen Size(Inch)

MN -42

-50

Example : MN-42 indicates that vender is MN and Screen Size is 42 inch.

Andere Handbücher für 42HP95 - 42" Plasma TV

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Plasma-TV Handbücher

Toshiba

Toshiba 42HP84 - 42" Plasma TV Bedienungsanleitung

Toshiba

Toshiba 50HP95 Bedienungsanleitung

Toshiba

Toshiba 42HP86 Bedienungsanleitung

Toshiba

Toshiba 50HP16 Bedienungsanleitung

Toshiba

Toshiba 42HP95 - 42" Plasma TV Bedienungsanleitung

Toshiba

Toshiba 42HP83 Bedienungsanleitung

Toshiba

Toshiba 42WP56P Bedienungsanleitung

Toshiba

Toshiba 42HP66 - 42" Plasma TV Bedienungsanleitung

Toshiba

Toshiba 42HP95 - 42" Plasma TV Bedienungsanleitung

Toshiba

Toshiba 42HP16 Bedienungsanleitung

Toshiba

Toshiba 42HP84 - 42" Plasma TV Bedienungsanleitung

Toshiba

Toshiba 42HP84 - 42" Plasma TV Service-Handbuch

Toshiba

Toshiba Flat Panel Television Bedienungsanleitung

Toshiba

Toshiba 42WP36P Bedienungsanleitung

Toshiba

Toshiba 50HP16 Bedienungsanleitung

Toshiba

Toshiba 42HPX95 - 42" Plasma Panel Bedienungsanleitung

Toshiba

Toshiba 42HP66 - 42" Plasma TV Bedienungsanleitung

Toshiba

Toshiba 42HPX95 - 42" Plasma Panel Bedienungsanleitung

Toshiba

Toshiba 42HP66 - 42" Plasma TV Bedienungsanleitung

Toshiba

Toshiba 50HP16 Bedienungsanleitung

Toshiba

Toshiba 42WP46P Bedienungsanleitung

Toshiba

Toshiba 50HPX95 Bedienungsanleitung

Toshiba

Toshiba 42HP95 - 42" Plasma TV Bedienungsanleitung

Toshiba

Toshiba 42HP66 - 42" Plasma TV Bedienungsanleitung

Beliebte Plasma-TV Handbücher anderer Marken

Hitachi

Hitachi 50PD9800TA Bedienungsanleitung

LG 60PA5500 Bedienungsanleitung

Sony

Sony WEGA KE-P42M1 Bedienungsanleitung

VESTEL

VESTEL PL2000 Bedienungsanleitung

VisionQuest

VisionQuest PVQ-32VGB Bedienungsanleitung

Maxent

Maxent MX-5020HPM Bedienungsanleitung

LG 50PK550 Bedienungsanleitung

LG PJ550N Bedienungsanleitung

Samsung

Samsung PA43H4000 Bedienungsanleitung

LG 42LG70ER Bedienungsanleitung

Samsung

Samsung 7+ series Bedienungsanleitung

Panasonic

Panasonic Viera TH-37PA60EY Bedienungsanleitung

LG DU-42PZ60H Bedienungsanleitung

Panasonic

Panasonic Viera TH-42PX80A Bedienungsanleitung

Panasonic

Panasonic VIERA TH-P50X30D Bedienungsanleitung

Panasonic

Panasonic TH-50PX20U/P Bedienungsanleitung

Panasonic

Panasonic TH-37PW7BX Bedienungsanleitung

Nexus

Nexus NX422 Bedienungsanleitung