Toshiba TDP-P8 Bedienungsanleitung

SAFETY PRECAUTIONS

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user t

o the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of sufﬁ cient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (servicing) instructions

in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN

THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING:

Handling the cord on this product or cords associated with accessories sold

with this product, will expose you to lead, a chemical known to the State of

California to cause birth defects or other reproductive harm.

Wash hands

after handling.

WARNING:

This [product] contains mercury. Disposal of mercury may be regulated due

to environmental considerations. For disposal or recycling information, please

contact your local authorities or the Electronic Industries Alliance: www.eiae.

org.

MODEL NAME: TDP-

USA only

TRADE NAME: DATA PROJECTOR

MODEL NAME: TDP-P8

Teste

d To Comply

With FC

C Standards

FOR HOME OR OFFICE USE

FCC NOTICE:

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. This

equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

USA only

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

RESPONSIBLE PARTY:

SHIBA AMERICA INFORMATION SYSTEMS, INC.

9740 Irvine Blvd., Irvine, CA 92618-1697 U.S.A

Phone: (949) 583-3000

WARNING:

Changes or modiﬁ cations made to this eq

uipment

, not expressly approved by

Toshiba, or parties authorized by Toshiba, could void the user’s authority to

ope

rate the equip

ment.

WARNING:

This Class B digital app

aratu

s complies with Canadian ICES-003

. Cet appareil

numérique de la classe B est conform

e à la norme NMB-003 du Canada.

USA only

CANADA

only

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:

P L E A S E R E A D A N D O B S E R V E A L L W A R N I N G S A N D

INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE

MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE

REFERENCE.

This set has been designed and manufactured to assure personal safety. Improper use

can result in electric shock or fire haz

ard

. The safe

guards incorporated in this unit will

protect you if you observe the following proce

dures for installation, use and servicing.

This

unit is fully transistorized and does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO

DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL ONLY.

Read Owner’s Manual

After unpacking this product, read

the owner’s manual carefully, and

follow all the operating and other

instructions.

Source of Light

Do not look into the lens while the

lamp is on. The strong light from

the lamp may cause damage to

your eyes or sight.

Power Sources

This product should be operated

only from the type of power source

indicated on the marking label.

If you are not sure of the type

of power supply to your home,

consult your product dealer or

local power company.

For products intended to operate

from battery power, or other

sources, refer to the operating

instructions.

Ventilation

Openings in the cabinet are

provided for ventilation and to

ensure reliable operation of the

product and to protect it from

overheating, and these openings

must not be blocked or covered.

The openings should never be

blocked by placing the product on

a bed, sofa, rug or other similar

surface. This product should not

be placed in a built-in installation

such as a bookcase or rack unless

proper ventilation is provi

ded or the

manufacturer’s instructions have

been adhered to.

Heat

The product should be situated

away from heat sources such as

radiators, heat registers, stoves,

or other products (including

ampliﬁ ers) that produce heat.

Water and Moisture

Do not use this product near water.

- for example, near a bath tub,

wash bowl, kitchen sink, or laundry

tub; in a wet basement; or near a

swimming pool and the like.

Cleaning

Unplug this product from the wall

outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners.

Use a soft cloth for cleaning.

Power-Cord Protection

Power-supply cords should be

routed so that they are not likely to

be walked on or pinched by items

placed upon or against them,

paying particular attention to cords

at plugs, convenience receptacles,

and the point where they exit from

the product.

Overloading

Do not overload wall outlets;

extension cords, or integral

convenience receptacles as

this can result in a risk of ﬁ re or

electric shock.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

Lightning storms

For added protection for this

product during storm, or when it

is left unattended and unused for

long periods of time, unplug it from

the wall outlet. This will prevent

damage to the product due to

lightning and power-line surges.

However, while it is thundering

or lightning, do not touch the

apparatus and any connected

cable and/or equipment. This will

prevent you from receiving the

electric shock by an electric surge.

Object and Liquid Entry

Never push objects of any kind

into this product through openings

as they may touch dangerous

voltage points or short-out parts

that could result in a ﬁ re or electric

shock. Never spill liquid of any

kind on the product.

Do not place the product

vertically

Do not use the product in the

upright position to project the

pictures at the ceiling, or any

other vertical positions. It may fall

down and dangerous.

Stack Inhibited

Do not stack other equipment on

this product or do not place this

product on the other equipment.

Top and bottom plates of this

product develops heat and may

give some undesirable damage to

other unit.

Attachments

Do not use attachments not

recommended by the product

manufacturer as they may cause

hazards.

Introduction

Accessories

Do not place this product on

an unstable cart, stand, tripod,

bracket, or table. The product may

fall, causing serious injury to a

child or adult, and serious damage

to the product. A product and cart

combination should be moved

with care. Quick stops, excessive

force, and uneven surfaces

may cause the product and cart

combination to overturn.

S3125A

Damage Requiring Service

Unplug this product from the

wall outlet and refer servicing to

qualiﬁ ed service personnel under

the following conditions:

a) When the power-supply cord or

plug is damaged.

b) If liquid has been spilled, or

objects have fallen into the

product.

c) If the product has been exposed

to rain or water.

d) If the product does not operate

normally by following the

operating instructions. Adjust only

those controls that are covered

by the operating instructions as

an improper adjustment of other

controls may result in damage

and will often require extensive

work by a qualiﬁ ed technician to

restore the product to its normal

operation.

e) If the product has been dropped

or damaged in any way.

f) When the product exhibits a

distinct change in performance -

this indicates a need for service.

If glass components,

including lens and lamp,

should break, contact your

dealer for repair service.

This product incorporates glass

components, including a lens and

a lamp. If such parts should break,

please handle with care to avoid

injury and contact your dealer for

repair service. The broken pieces

of glass may cause to injury. In

the unlikely event of the lamp

rupturing, thoroughly clean the

area around the projector and

discard any edible items placed in

that area.

Servicing

Do not attempt to service this

product yourself as opening or

removing covers may expose you

to dangerous voltage or other

hazards. Refer all servicing to

qualiﬁ ed service personnel.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

Replacement Parts

When replacement parts

are required, be sure the

service technician has used

replacement parts speciﬁ ed by the

manufacturer or have the same

characteristics as the original part.

Unauthorized substitutions may

result in ﬁ re, electric shock, or

other hazards.

(Replacement of the lamp only

should be made by users.)

Safety Check

Upon completion of any service

or repairs to this product, ask

the service technician to perform

safety checks to determine that

the product is in proper operating

condition.

Do not leave thermalpaper

documents or easily

deformed items on top

of the unit or near the air

exhaust for long periods

of time.

The heat from the unit could erase

the information on the thermal

paper, or cause deformation or

warping.

Do not use the product in

a closed installation state.

Do not place the product in a box

or in any other closed installation

state. Otherwise it may overheat.

This could result in a risk of ﬁ re.

Do not look into the laser

light source of the remote

control or direct the laser

pointer toward a person

or a mirror.

The laser beam may cause

damage to the eyes or sight.

POWER SUPPLY CORD SELECTION

If your line voltage is 220 to 240V, use one of the following types of cable.

Plug

configuration

Plug type

Australian

240V

10A

North American

240V

15A

Switzerland

240V

Line voltage

EURO

220 240V

200 240V

Plug

configuration

Plug type

Line voltage

Use a 5A fuse which is approved by ASTA

or BSI to BSI362.

Always replace the fuse cover after

changing the fuse.

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to

ship your projector. For maximum protection, repack the set as it was originally packed at

the factory.

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location.

When the unit is exposed to such a change in temperature, moisture may condense on the

lens and the crucial internal parts. To prevent the unit from possible damage, do not use

the unit for at least 2 hours when there is an extreme or sudden change in temperature.

Place and Manner of Installation

•

Do not place in hot locations, such as near heating equipment. Doing so could cause

malfunction, and shorten the life of the projector.

•

Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts, shortening

their lives, and darkening the screen.

•

Do not use this product in the upright position or tilt it up or down by more than 20° from

level. Doing so may cause a failure or shorten the life of the product.

•

Using this instrument near a TV or radio may cause interference to the images or audio

sound. If this happens, move it away from the TV or radio.

•

Moving the projector from a low-temperature room to a high-temperature room may

cause condensation on the lens or internal parts in the instrument. If you continue to

use it in that situation, the malfunction may result. Ensure to wait until the condensation

naturally disappears.

•

In a high altitude location where air is thin, cooling efficiency is reduced so use the

projector with

[Fan mode]

set to

[High]

IMPORTANT PRECAUTIONS (Continued)

EXEMPTION CLAUSES

•

Toshiba Corporation bears no responsibility in the case of damages arising from natural

disaster such as earthquakes, lightning, etc., ﬁ re not liable to Toshiba Corporation, acts

by third parties, other accidents, or use under abnormal conditions including erroneous or

improper operation and other problems.

•

Toshiba Corporation bears no responsibility for incidental damages (lost proﬁ t, work

interruption, corruption or loss of the memory contents, etc.) arising from the use of or the

inability to use this unit.

•

Toshiba Corporation accepts no liability whatsoever for any damages arising from not

having followed the descriptions in this Instruction Manual.

•

Toshiba Corporation accepts no liability whatsoever for any damages arising from

malfunctions arising from combination with equipment or software that is not related to

Toshiba Corporation.

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or

plastic products touching the unit for a long time. They will leave marks on the ﬁ nish.

If cleaning with a chemically saturated cloth, be sure to follow the product’s precautions.

In the spaces provided below, record the Model and Serial No. located at the bottom of your

projector.

Model No. Serial No.

Retain this information for future reference.

•

The set of projector is hot after use. Handle with care.

•

Do not use the projector while holding it in your hands or lap.

•

Do not use the projector near a power source and the like, or in locations like a ship

or vehicle that are subject to vibration or shock. Doing so may lead to a malfunction or

shorten service life.

OTHER CAUTIONS AND INFORMATIONS

Copyrights

Showing or transmitting commercial imaging software or broadcast or cable-broad

casting programs with the purpose of other than the personal and private viewing,

including

modifying

images using the freeze, resize, PIP, or SPLIT screen functions, or

displaying with the varying aspect ratio of the images, could violate the direct or indirect

copyrights of the imaging software or broadcast program, etc., if done without first

consulting with the copyright holder. For this reason, please take appropriate measures

before performing one of the actions listed above, including obtaining a license from the

Disposal

ollowing information is only for EU-member states:

The use of the symbol indicates that this product may not be treated as

household waste. By ensuring this product is disposed of correctly, you will

help prevent potential negative consequences for the environment and human

health, which could otherwise be caused by inappropriate waste handling of

this product. For more detailed information about recycling of this product,

please contact your local city ofﬁ ce, your household waste disposal service or

the shop where you purchased the product.

This product contains substances which are harmful to humans and the environment.

•

The lamp contains inorganic mercury.

Please dispose of this product or used lamps in accordance with lo

cal regulations.

Trademarks

•

GA, SVGA, XGA, SXGA, UXGA are trademarks or registered trademarks of

International Business Machines Corporation.

•

Digital Light Processing, Digital Micromirror Device and DMD are trademakes of Texas

Instruments.

•

Macintosh is a registered trademark of Apple Computer, Inc.

•

Windows is a registered trademark of Microsoft Corporation in the U.S. and other

countries.

•

Adobe is a registered trademark and Acrobat Reader is a trademark of Adobe Systems

Incorporated.

Notational Conventions Used in This Manual

•

eferences to pages with related information are annotated as follows.

For example, if making a reference to page 35:

•

The illustrations in this document are for reference purposes only and may not reflect

your package exactly.

Andere Handbücher für TDP-P8

Inhaltsverzeichnis

Andere Toshiba Projektor Handbücher

Toshiba

Toshiba ET1 Bedienungsanleitung

Toshiba

Toshiba Camileo TDP-S20 Bedienungsanleitung

Toshiba

Toshiba TDP-S3 Bedienungsanleitung

Toshiba

Toshiba TLP-XD2000U Bedienungsanleitung

Toshiba

Toshiba TDP-S2 Bedienungsanleitung

Toshiba

Toshiba TLP X4100 Bedienungsanleitung

Toshiba

Toshiba TLP-T70M Bedienungsanleitung

Toshiba

Toshiba TLP450E Bedienungsanleitung

Toshiba

Toshiba TDP-S35U Bedienungsanleitung

Toshiba

Toshiba TDP-SC35U Bedienungsanleitung

Toshiba

Toshiba TDP-TW90AU Bedienungsanleitung

Toshiba

Toshiba TLP-MT7 - LCD Projector - 1000 ANSI Lumens Bedienungsanleitung

Toshiba

Toshiba TDP-B1-US Bedienungsanleitung

Toshiba

Toshiba TDP-S8U Bedienungsanleitung

Toshiba

Toshiba TDP-S35U Bedienungsanleitung

Toshiba

Toshiba TLP780U Bedienungsanleitung

Toshiba

Toshiba TDP-T98U Bedienungsanleitung

Toshiba

Toshiba TDP-TW350U Montageanleitung

Toshiba

Toshiba TLP-S10U - SVGA LCD Projector Bedienungsanleitung

Toshiba

Toshiba TLP-SX3500 Technisches Dokument

Toshiba

Toshiba SHX10 Bedienungsanleitung

Toshiba

Toshiba TLP-S10 Bedienungsanleitung

Toshiba

Toshiba TLP-T50M Bedienungsanleitung

Toshiba

Toshiba TDP-P75 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung