Toshiba TDP-XP1U - XGA DLP Projector Bedienungsanleitung

OWNER’S MANUAL

TDP-XP1

In the spaces provided below, record the Model and Serial No. located at the bottom of

your projector.

Model No. Serial No.

Retain this information for future reference.

Others Maintenance Operations Preparations Before Using

DATA PROJECTOR

SAFETY PRECAUTIONS

The lightning ﬂash with arrowhead symbol, within an equilateral triangle, is in-

tended to alert the user to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of sufﬁcient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (servicing) instructions

in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAG-

ES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABI-

NET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING: Handling the cord on this product or cords associated with accessories sold

with this product, will expose you to lead, a chemical known to the State of

California to cause birth defects or other reproductive harm. Wash hands af-

ter handling.

Lamp contains mercury. Disposal of this product may be regulated due to

environmental considerations. For disposal, reuse or recycling information,

please contact your local government or the Electronic Industries Alliance at

www.eiae.org.

MODEL NAME: TDP-XP1 USA only

TRADE NAME: DATA PROJECTOR MODEL NAME: TDP-XP1

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. This

equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment gener-

ates, uses and can radiate radio frequency energy and, if not installed and used in ac-

cordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

USA only

Before Using

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

RESPONSIBLE PARTY: TOSHIBA AMERICA INFORMATION SYSTEMS, INC.

9740 Irvine Blvd., Irvine, CA 92618-1697 U.S.A

Phone: (949) 583-3000

CAUTION: Changes or modiﬁcations made to this equipment, not expressly approved by

Toshiba, or parties authorized by Toshiba, could void the user’s authority to

operate the equipment.

NOTICE: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe B est conforme à la norme NMB-003 du Canada.

USA only

CANADA only

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUC-

TIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED

ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFER-

ENCE.

This unit is fully transistorized and does not contain any parts that can be repaired by the

user.

WARNING:

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EX-

POSED TO DANGEROUS VOLTAGE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL ONLY.

1. Read Owner’s Manual

After unpacking this product, read

the owner’s manual carefully, and

follow all of the operating and

other instructions.

3. Source of Light

Do not look into the lens while the

lamp is on. The strong light from

the lamp may cause damage to

your eyesight.

2. Power Sources

This product should be operated

only from the type of power source

which does not exceed the voltage

range speciﬁed on the rating label

and the power cord. If you are not

sure of the type of power supply to

your home, consult your product

dealer or local power company.

4. Ventilation

Openings in the cabinet are pro-

vided for ventilation and to ensure

reliable operation of the product

and protect it from overheat-

ing. These openings must not be

blocked or covered. Never block

an opening by placing the product

on a bed, sofa, rug or other similar

surface. Do not place it in a built-

in installation such as a bookcase

or rack, unless proper ventilation is

provided.

Before Using

5. Heat

The product should be situated

away from heat sources such as

radiators, heat registers, stoves,

or other products (including ampli-

ﬁers) that produce heat.

6. Water and Moisture

Do not use this product near wa-

ter. - for example, near a bath tub,

wash bowl, kitchen sink, or laundry

tub; in a wet basement; or near a

swimming pool and the like.

7. Cleaning

Unplug this product from the wall

outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners.

Always use a soft cloth for clean-

ing.

8. Besurethatyourmlyin-

sert the plug into the wall

outlet.

Incorrect or faulty connections

may result in ﬁre or electric shock.

Avoid using an unsound or loose

outlet.

9. Power Cord Protection

Power cords should be routed

so that they are not likely to be

walked on or pinched by items

placed upon or against them, pay-

ing particular attention to cords at

plugs, convenience receptacles,

and the point where they exit from

the product.

10. Overloading

Do not overload wall outlets. To

reduce the risk of electric shock,

do not use the polarized plug with

an extension cord, receptacle, or

other outlet unless the blades can

be inserted completely with three-

wire grounding type to prevent

blade exposure. Failure to follow

these instructions may result in

ﬁre or electric shock.

11. Lightningstorms

For added protection for this

product during a storm, or when

it is left unattended and unused

for long periods of time, unplug it

from the wall outlet. This will pre-

vent damage to the product due

to lightning and power-line surges.

Never operate this unit on AC

power during a thunderstorm. If

you see lightning or hear thunder,

never touch the unit, cables and/

or peripherals. An electric surge

caused by the storm, may result in

an electrical shock or damage to

the unit.

12. Object and Liquid Entry

Never push objects of any kind

into this product through open-

ings as they may touch dangerous

voltage points or short-out parts

that could result in a ﬁre or elec-

tric shock. Never spill liquid of any

kind on the product.

13. Do not place or keep the

projector within the reach

of the children.

It may fall or tip over, possibly

causing serious injury.

14. Do not place the product

vertically

Do not use the product in the up-

right position or any other vertical

positions to project the pictures. It

may fall which could result in seri-

ous injury and/or damage to the

product.

15. Stack Inhibited

Do not stack other equipment on

this product and do not place this

product on other equipment. The

top and bottom surface of this

product increase in temperature

during normal use and may dam-

age the other unit.

16. Attachments

Do not use attachments not rec-

ommended by the product manu-

facturer. Use of an incompatible

attachments could cause hazards

or damage to the product.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

Before Using

Introduction

17. Accessories

Do not place this product on an

unstable cart, stand, tripod, brack-

et, or table. The product may fall,

causing serious injury to a child

or adult, and serious damage to

the product. A product and cart

combination should be moved with

care. Quick stops, excessive force,

and uneven surfaces may cause

the product and cart combination

to overturn.

S3125A

18. DamageRequiringService

Unplug this product from the wall

outlet and take the product to

qualiﬁed service personnel if you

encounter any of the following

conditions:

a) The power supply cord or plug is

damaged.

b) Liquid has been spilled, or objects

have fallen into the product.

c) The product has been exposed to

rain or water.

d) The product does not operate

normally when following the op-

erating instructions. Adjust only

those controls that are covered by

the operating instructions since an

improper adjustment of other con-

trols may result in damage and will

often require extensive work by a

qualiﬁed technician to restore the

product to its normal operation.

e) The product has been dropped or

damaged in any way (If the cabi-

net should break, please handle

with care to avoid injury).

f) The product exhibits a distinct

change in performance, which

indicates a need for service.

19. Ifglasscomponents,in-

cludinglensandlamp,

should break, contact your

dealer for repair service.

This product incorporates glass

components, including a lens and

a lamp. If these should break,

please handle with care to avoid

injury and contact your dealer for

repair service. Avoid any broken

pieces of glass since they may

cause injury. In the unlikely event

that the lamp ruptures, thoroughly

clean the area around the projec-

tor and discard any edible items

placed in that area since they may

be contaminated.

20. Servicing

Do not attempt to service this

product yourself as opening or

removing covers may expose you

to dangerous voltage or other haz-

ards. Refer all servicing to quali-

ﬁed service personnel.

21. ReplacementParts

When replacement parts are re-

quired, be sure the service techni-

cian has used replacement parts

speciﬁed by the manufacturer or

have the same characteristics as

the original part.

Unauthorized substitutions may

result in ﬁre, electric shock, or

other hazards.

(Only the replacement of the lamp

should be made by users.)

22. Safety Check

Upon completion of any service

or repairs to this product, ask the

service technician to perform safe-

ty checks to verify that the product

is in proper operating condition.

23. Donotleavethermal-

paperdocumentsoreas-

ilydeformeditemsontop

of the unit or near the air

exhaust for long periods

oftime.

The heat from the unit could erase

the information on the thermal

paper, or cause deformation or

warping.

24. Do not use the product in

a closed installation loca-

tion.

Do not place the product in a box

or in any other closed installation

location. Otherwise it may over-

heat, which could result in a risk

of ﬁre.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

Before Using

POWER SUPPLY INFORMATION

If your line voltage is 220 to 240V, use one of the following types of cable/plug.

Plug

configuration Plug type

Australian

240V

10A

North American

240V

15A

Switzerland

240V

Line voltage

EURO

220 240V

200 240V

Plug

configuration Plug type Line voltage

Use a 5A fuse which is approved by ASTA

or BSI to BSI362.

Always replace the fuse cover after

changing the fuse.

IMPORTANT PRECAUTIONS

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location.

When the unit is exposed to such a change in temperature, moisture may condense on

the lens and the crucial internal parts. Do not use the unit for at least 2 hours when there

is an extreme or sudden change in temperature to prevent the unit from possible damage.

Place and Manner of Installation

• Donotplaceinhotlocations,suchasnearheatingequipment.Doingsocouldcause

malfunction, and shorten the life of the projector.

• Avoidlocationswithoilorcigarettesmoke.Doingsowilldirtytheopticalparts,shortening

their lives, and darkening the screen.

• Donotusethisproductintheuprightpositionortiltitupordownbymorethan20°from

level. Doing so may cause a failure or shorten the life of the product.

• UsingthisinstrumentnearaTVorradiomaycauseinterferencetotheimagesoraudio

sound. If this happens, move it away from the TV or radio.

• Movingtheprojectorfromalow-temperatureroomtoahigh-temperatureroommaycause

condensation on the lens or internal parts. If you continue to use it in that situation it may

malfunction. Wait until the condensation naturally disappears.

• Inahighaltitudelocationwhereairisthin,coolingefciencyisreducedsousethepro-

jector with [Fanmode] set to [High].

p.34

EXEMPTION CLAUSES

• ToshibaCorporationbearsnoresponsibilityinthecaseofdamagesarisingfromnatural

disaster such as earthquakes, lightning, etc., ﬁre not liable to Toshiba Corporation, acts

by third parties, other accidents, or use under abnormal conditions including erroneous or

improper operation and other problems.

• ToshibaCorporationbearsnoresponsibilityforincidentaldamages(lostprot,workinter-

ruption, corruption or loss of the memory contents, etc.) arising from the use of or the

inability to use this unit.

• ToshibaCorporationacceptsnoliabilitywhatsoeverforanydamagesarisingfromnot

having followed the descriptions in this Owner’s Manual.

• ToshibaCorporationacceptsnoliabilitywhatsoeverforanydamagesarisingfrommal-

functions arising from combination with equipment or software that is not related to

Toshiba Corporation.

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or

plastic products touching the unit for a long time, as they will leave marks on the ﬁnish.

Do not use a chemically saturated cloth.

• Thesetofprojectorishotafteruse.Handlewithcare.

• Donotusetheprojectorwhileholdingitinyourhandsorlap.

• Donotusetheprojectornearapowersourceandthelike,orinlocationslikeashiporve-

hicle that are subject to vibration or shock. Doing so may lead to a malfunction or shorten

service life.

• Onlyplugthepowercordintooutletsratedforusewiththepowercord’sspeciedvoltage

range. Do not overload extension cords or power strips as this can result in ﬁre or electric

shock.

• Routethepowercableortheconnectingcableawayfromwherepeoplecouldtripoverit.

The projector may fall, which could result in severe injury.

• Besurethepowercordiseasilyreachedforunpluggingincaseofemergency.Donot

place any obstacles near a wall outlet in which the cord is plugged.

IMPORTANT PRECAUTIONS (Continued)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Projektor Handbücher

Toshiba

Toshiba TDP-B1 Bedienungsanleitung

Toshiba

Toshiba TDP-T8 Bedienungsanleitung

Toshiba

Toshiba TDP-EW25 Bedienungsanleitung

Toshiba

Toshiba TLP-X10E Bedienungsanleitung

Toshiba

Toshiba TDP-T100U Bedienungsanleitung

Toshiba

Toshiba TLP-S10 Bedienungsanleitung

Toshiba

Toshiba TLP-T50M Bedienungsanleitung

Toshiba

Toshiba TDP-TW300 Bedienungsanleitung

Toshiba

Toshiba TLP780E Bedienungsanleitung

Toshiba

Toshiba TDP-P3-US Bedienungsanleitung

Toshiba

Toshiba TDP-D2-US Bedienungsanleitung

Toshiba

Toshiba SHX10 Bedienungsanleitung

Toshiba

Toshiba C1770 Gebrauchs- und Wartungshandbuch

Toshiba

Toshiba TLP-B2U Bedienungsanleitung

Toshiba

Toshiba TLP-T70MU Bedienungsanleitung

Toshiba

Toshiba TDP-TW100 Montageanleitung

Toshiba

Toshiba TDP-SP1U - SVGA DLP Projector Bedienungsanleitung

Toshiba

Toshiba TDP-TW355 Bedienungsanleitung

Toshiba

Toshiba TDP-TW95E Bedienungsanleitung

Toshiba

Toshiba X100U - TLP XGA LCD Projector Bedienungsanleitung

Toshiba

Toshiba TDP-T90 Bedienungsanleitung

Toshiba

Toshiba TDP-T90AU Bedienungsanleitung

Toshiba

Toshiba TDP-S25U Bedienungsanleitung

Toshiba

Toshiba TLP680U - SXGA LCD Projector Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Philips

Philips LC1341 Referenzhandbuch

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung

Epson

Epson PowerLite 810p Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Bedienungsanleitung