Toshiba TLP-MT7E Bedienungsanleitung

Before use

CONTENTS

OWNER’S MANUAL

3LCD PROJECTOR

TLP-MT7E

TEMPLAMPON

BUSYFAN

ON/STANDBY

KEYSTONESET

AUTO

EXIT

ENTER

MENUINPUT

VOL/ADJ.

COMPUTERIN 1

(Y/P

)

CONTROL

S-VIDEO

VIDEO

VIDEOIN

R- AUDIO - L

AUDIO

23565376

Before use

SAFETY PRECAUTIONS

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated “dangerous

voltage”within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and

maintenance (servicing) instructions

in the literature accompanying the

appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN

THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

CAUTION: Laser beam is emitted when the laser button of the remote control is

pressed. Do not look from the front of the remote control. Do not face toward

a person or to a mirror.

WARNING: This is a Class A product.In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

Before use

CONTENTS

IMPORTANT PRECAUTIONS

In the spaces provided below, record the Model and Serial No.

located at the bottom of your LCD projector.

Model No. Serial No.

Retain this information for future reference.

Save Original Packing Materials

The original shipping carton and packing materials will come in

handy if you ever have to ship your LCD projector. For maximum

protection, repack the set as it was originally packed at the factory.

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit.

Do not leave rubber or plastic products touching the unit for a long

time.They will mar the finish.

Moisture Condensation

Never operate this unit immediately after moving it from a cold

location to a warm location.When the unit is exposed to such a

change in temperature, moisture may condense on the crucial

internal parts.To prevent the unit from possible damage, do not use

the unit for at least 2 hours when there is an extreme or sudden

change in temperature.

Before use

3. Source of Light

Do not look into the lens while the lamp

is on. The strong light from the lamp

may cause damage to your eyes or

sight.

4. Ventilation

Openings in the cabinet are provided for

ventilation and to ensure reliable

operation of the product and to protect it

from overheating, and these openings

must not be blocked or covered.The

openings should never be blocked by

placing the product on a bed, sofa, rug

or other similar surface.This product

should not be placed in a built-in

installation such as a bookcase or rack

unless proper ventilation is provided or

the manufacturer’s instructions have

been adhered to.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND

OBSERVE ALL WARNINGS

AND INSTRUCTIONS GIVEN

IN THIS OWNER’S MANUAL

AND THOSE MARKED ON

THE UNIT. RETAIN THIS

BOOKLET FOR FUTURE

REFERENCE.

This set has been designed and

manufactured to assure personal safety.

Improper use can result in electric shock or

fire hazard.The safeguards incorporated in

this unit will protect you if you observe the

following procedures for installation, use and

servicing.This unit is fully transistorized and

does not contain any parts that can be

repaired by the user.

DO NOT REMOVE THE CABINET COVER,

OR YOU MAY BE EXPOSED TO

DANGEROUS VOLTAGE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL ONLY.

1. Read Owner’s Manual

After unpacking this product, read the

owner’s manual carefully, and follow all

the operating and other instructions.

2. Power Sources

This product should be operated only

from the type of power source indicated

on the marking label. If you are not sure

of the type of power supply to your

home, consult your product dealer or

local power company.

For products intended to operate from

battery power, or other sources, refer to

the operating instructions.

Continued

Before use

CONTENTS

5. Heat

The product should be situated away

from heat sources such as radiators,

heat registers, stoves, or other products

(including amplifiers) that produce heat.

IMPORTANT SAFETY INSTRUCTIONS (continued)

6. Water and Moisture

Do not use this product near water –for

example, near a bath tub, wash bowl,

kitchen sink, or laundry tub; in a wet

basement; or near a swimming pool and

the like.

7. Cleaning

Unplug this product from the wall outlet

before cleaning. Do not use liquid

cleaners or aerosol cleaners.Use a

damp cloth for cleaning.

8. Power-Cord Protection

Power-supply cords should be routed so

that they are not likely to be walked on

or pinched by items placed upon or

against them, paying particular attention

to cords at plugs, convenience

receptacles, and the point where they

exit from the product.

9. Overloading

Do not overload wall outlets;extension

cords, or integral convenience

receptacles as this can result in a risk of

fire or electric shock.

10. Lightning

For added protection for this product

during storm, or when it is left

unattended and unused for long periods

of time, unplug it from the wall outlet.

This will prevent damage to the product

due to lightning and power-line surges.

Continued

Before use

13. Stack Inhibited

Do not stack other equipment on this

product or do not place this product on

the other equipment.

Top and bottom plates of this product

develops heat and may give some

undesirable damage to other unit.

14. Attachments

Do not use attachments not

recommended by the product

manufacturer as they may cause

hazards.

11. Object and Liquid Entry

Never push objects of any kind into this

product through openings as they may

touch dangerous voltage points or short-

out parts that could result in a fire or

electric shock. Never spill liquid of any

kind on the product.

12. Do not place the product vertically

Do not use the product in the upright

position to project the pictures at the

ceiling, or any other vertical positions.

It may fall down and dangerous.

IMPORTANT SAFETY INSTRUCTIONS (continued)

S3125A

Continued

15. Accessories

Do not place this product on an unstable

cart, stand, tripod, bracket, or table.The

product may fall, causing serious injury to

a child or adult, and serious damage to

the product. Use only with a cart, stand,

tripod, bracket, or table recommended by

the manufacturer, or sold with the product.

Any mounting of the product should follow

the manufacturer’s instructions, and

should use a mounting accessory

recommended by the manufacturer.

A product and cart combination should be

moved with care. Quick stops, excessive

force, and uneven surfaces may cause the

product and cart combination to overturn.

Before use

CONTENTS

17. If glass components, including lens

and lamp, should break, contact your

dealer for repair service.

This product incorporates glass

components, including a lens and a

lamp. If such parts should break, please

handle with care to avoid injury and

contact your dealer for repair service.

The broken pieces of glass may cause

to injury.

In the unlikely event of the lamp

rupturing, thoroughly clean the area

around the projector and discard any

edible items placed in that area.

18. Servicing

Do not attempt to service this product

yourself as opening or removing covers

may expose you to dangerous voltage or

other hazards.Refer all servicing to

qualified service personnel.

IMPORTANT SAFETY INSTRUCTIONS (continued)

19. Replacement Parts

When replacement parts are required,

be sure the service technician has used

replacement parts specified by the

manufacturer or have the same

characteristics as the original part.

Unauthorized substitutions may result in

fire, electric shock, or other hazards.

(Replacement of the lamp only should

be made by users.)

20. Safety Check

Upon completion of any service or

repairs to this product, ask the service

technician to perform safety checks to

determine that the product is in proper

operating condition.

16. Damage Requiring Service

Unplug this product from the wall outlet

and refer servicing to qualified service

personnel under the following conditions:

a) When the power-supply cord or plug

is damaged.

b) If liquid has been spilled, or objects

have fallen into the product.

c) If the product has been exposed to

rain or water.

d) If the product does not operate

normally by following the operating

instructions. Adjust only those

controls that are covered by the

operating instructions as an improper

adjustment of other controls may

result in damage and will often

require extensive work by a qualified

technician to restore the product to

its normal operation.

e) If the product has been dropped or

damaged in any way.

f) When the product exhibits a distinct

change in performance –this

indicates a need for service.

Before use

Power supply cord selection

If your line voltage is 220 to 240V, use one of

the following types of cable.

In Singapore, use the UK type plug cable.

(The UK type plug [MP5004] of this model is

approved by PSB.)

Plug

configuration Plug type

EURO

Line voltage

220 –240V

Use a 5A fuse which is approved by ASTA

or BSI to BSI362.

Always replace the fuse cover after

changing the fuse.

Before use

CONTENTS

Contents

Before use

SAFETY PRECAUTIONS ...................................................... 2

IMPORTANT PRECAUTIONS ............................................... 3

IMPORTANT SAFETY INSTRUCTIONS ............................... 4

Power supply cord selection............................................... 8

Contents ................................................................................ 9

Names of each part on the main unit................................ 10

Names of each part on the remote control ...................... 13

Loading batteries................................................................ 14

Remote control operation.................................................. 15

Installation and connections

Floor-mounted projector placement................................. 16

Projector placement angle adjustment ............................ 19

Ceiling-mounted projector placement.............................. 20

Connecting video equipment ............................................ 21

Connecting a computer ..................................................... 23

Projector operation control by a computer...................... 24

Operations

Projection on the screen.................................................... 25

Turning the power off......................................................... 28

Correcting the keystone distortion................................... 29

Enlarging the picture size.................................................. 30

Cutting off the picture and sound temporarily ................ 31

Freezing the picture ........................................................... 32

Adjusting the picture automatically (computer input) .... 33

Displaying PIP Sub-pictures.............................................. 34

Displaying Information....................................................... 35

Adjustments & Settings

Adjustments and settings on the menu screen............... 36

Operating the menu screen ............................................... 37

QUICK MENU adjustments and settings .......................... 38

FULL MENU adjustments and settings –Picture ............ 44

FULL MENU settings –Audio ............................................ 50

FULL MENU settings –Keystone...................................... 52

FULL MENU settings –Display ......................................... 54

FULL MENU settings –Default setting ............................. 57

FULL MENU settings –Factory reset mode..................... 61

PIP menu setting ................................................................ 63

Maintenance

Trouble indications ............................................................ 64

Air filter cleaning ................................................................ 65

Lens and main unit cleaning ............................................. 67

Lamp replacement.............................................................. 68

Others

Before calling service personal ........................................ 70

Pin assignment of COMPONENT IN connector .............................

Applicable signal ................................................................ 73

Controlling the projector by using RS-232C.................... 75

Specifications ..................................................................... 80

Before use

Names of each part on the main unit

Continued

TEMPLAMPON

BUSYF

ON/STANDBY

KEYSTONESET

AUTO

EXIT

ENTER

MENUINPUT

VOL/ADJ.

TEMPLAMPON

BUSYFAN

ON/STANDBY

KEYSTONESET

AUTO

EXIT

ENTER

MENUINPUT

VOL/ADJ.

COMPONENT IN

(

COMPUTER

)

CONTROL

S-VIDEO

VIDEO

VIDEO IN

R-AUDIO-L

AUDIO

Control panel

Air exhaust

Infrared remote

sensor

Front side

Right side Rear side

Left side

Anti-theft lock hole

Speaker

Air intake Air intake

Foot adjuster

release button

Foot adjuster

Zooming lever

Focusing ring

Also mounted on the front

of the left side.

AC IN socket

Lens cover

Lens

Carrying handle

Open to carry the

projector.

CAUTION

Openings in the cabinet are provided for ventilation and to

ensure reliable operation of the product and to protect it from

overheating, and these openings must not be blocked or

covered.

Note

The air exhaust discharges high temperature air. Do not put something around the air exhaust, otherwise it may be deformed by the high

temperature air.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Projektor Handbücher

Toshiba

Toshiba TDP B1 Bedienungsanleitung

Toshiba

Toshiba TLP-X4100E Bedienungsanleitung

Toshiba

Toshiba TLP680U - SXGA LCD Projector Referenzhandbuch

Toshiba

Toshiba TLP-B2E Bedienungsanleitung

Toshiba

Toshiba TDP-D2-US Bedienungsanleitung

Toshiba

Toshiba TDP-P5-US Bedienungsanleitung

Toshiba

Toshiba TLP791 Bedienungsanleitung

Toshiba

Toshiba TLP-261 Bedienungsanleitung

Toshiba

Toshiba TDP-P9 Bedienungsanleitung

Toshiba

Toshiba TLP-B2U Bedienungsanleitung

Toshiba

Toshiba X100U - TLP XGA LCD Projector Bedienungsanleitung

Toshiba

Toshiba TDP-T90 Bedienungsanleitung

Toshiba

Toshiba TLP-T50M Bedienungsanleitung

Toshiba

Toshiba X3000AU - XGA LCD Projector Bedienungsanleitung

Toshiba

Toshiba TLP-510U Bedienungsanleitung

Toshiba

Toshiba TDP-S8UCO1 Bedienungsanleitung

Toshiba

Toshiba TLP510 Bedienungsanleitung

Toshiba

Toshiba TLP470A Bedienungsanleitung

Toshiba

Toshiba TLP-X4500 Bedienungsanleitung

Toshiba

Toshiba C1770 Gebrauchs- und Wartungshandbuch

Toshiba

Toshiba TDP-S9 Montageanleitung

Toshiba

Toshiba TDP-T100 Bedienungsanleitung

Toshiba

Toshiba TDP-TW355U Bedienungsanleitung

Toshiba

Toshiba TLP-681 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung