Toshiba TC-net Bedienungsanleitung

TC-net OPC Server Instruction Manual

6F8C1368

13th Edition 21th August. 2014

The material in this manual may be revised without notice.

No part of this manual may be reproduced in any form without permission.

Introduction

Safety Precautions

The instruction manual and the labels affixed to the products or equipment give

important information for using products safely. It helps prevent damage to properties and

hazard to people who use them or work with them.

Make yourself familiar with the signal words and signs in this page, then read the safety

precautions that follow and always follow the instructions to avoid hazards.

Explanation of signal words

Signal word is a word that designates a degree or level of hazard seriousness.

The words WARNING and CAUTION are used for the products.

WARNING

Indicates a potentially hazardous situation which could result

in death or serious injury, if you do not follow the instructions.

CAUTION

Indicates a potentially hazardous situation which may result in

minor ormoderate injuryand/or propertydamage, if you do not

follow the instructions.

Hazard alert shapes and symbols

Following shapes and symbols are used in the safety precaution labels affixed to the

products and in other places including operation manuals for giving safety instructions.

Filled circle means "Mandatory Action" or "Do as indicated."

Required action is shown in the circle or described near the circle.

Circle band with a diagonal slash means "Prohibition" or " You must not do."

Prohibited action is shown in the circle or described near the circle.

Triangle means "Hazard Alerting" or "Be alert against hazard."

The kind of hazard is shown in the triangle or described near the triangle.

Exclamation point with a triangle is a safetyalert symbol which indicates a potential

hazard. It is used with a Signal Word.

Square or rectangle means "Information Messages" or "Notice."

Important precautions for system operation

System fault or data loss may occur in the event of power outage whether it is external or

internal of the system. Take precautions in advance to protect the system in order to prevent

such event to take place. Also back up your data regularly to minimize the possible damage by

loss of data as a result of such event.

Confirmation of product safety label

Confirm that product safety labels are put on the front panel of the power supply module.

If the label is lost or soiled, inform TOSHIBA Corporation.

Introduction

This manual explains how to use OPC Server for TC-net 100 and TC-net 1G*1.

First, read "Safety Precautions" carefully to use this device safely and correctly. After you read this manual,

keep it in a place where you can find it easily when you need it.

Composition of This Manual

This manual is composed of the following chapters.

Chapter 1 Outline of OPC Server

This explains the functions and composition of the OPC Server and needful processes for managing OPC

Server.

Chapter 2 Setting-Up OPC Server

This explains how to install, reinstall, uninstall and update the OPC Server.

Chapter 3 How to set the environments for connecting with OPC

This explains how to set the environments (DCOM, Security and Firewall etc.) which OPC clients connect

to OPC Server with.

Chapter 4 Launch / Close OPC Server

This explains how to launch OPC Server.

Chapter 5 Dual function

This explains the dual constitution of the OPC server.

Chapter 6 List of OPC items

This explains the item of a state and the dual state of OPC server oneself.

Chapter 7 How to set the environment for OPC Server

This explains about how to set the environment for OPC server action.

Chapter 8 Log Save Tool

This explains a function to store an OPC server-related log file for a long time.

Chapter 9 Log Decompress Tool

This explains a function to decompress a stored log file for a long time.

Chapter 10 RAS function *1

This explains the RAS function of the OPC server. *1 : Support of TC-net1G and RAS function added in V01.60

Microsoft and Windows are trademarks of US Microsoft Corporation registered in U.S.A. and other

countries.

Other company names and product names described in this manual are the trademarks and registered

trademarks of the respective companies.

Introduction

iii

Reference Manual

The reference manual is as follows:

TC-net OPC Server Setting Tool Instruction Manual 6F8C1369

Conventions used in this manual

Other than safety precaution items, the following symbols are used to explain items that

need your attention.

Important: Explains items required to use the product correctly.

Tip: Introduces referential matters to help you understand the main text.

Reference: Documents you should refer to help you understand the main text.

→Indicates reference locations of this manual or other manuals.

Prohibition of copying

This OPC server is protected by Copyright.

This OPC server can be installed in only one computer. When it is necessary to install OPC

server in another computer by dual constitution, please buy the OPC server software newly.

Contents

Safety Precautions i

Introduction iii

1. Outline of OPC Server 1

1.1. Outline of OPC Server 1

1.2. Environments 2

1.3. Constitution 3

1.4. Specifications 4

1.5. Data type 6

1.6. ProgID 6

2. Setting-Up OPC Server 7

2.1. Installation 7

2.2. Maintenance 10

2.3. Uninstallation 14

3. How to set the environments for connecting with OPC 19

3.1. DCOM Setting 20

3.2. Security Setting 36

3.3. Windows Firewall 41

3.4. User Account Control (Windows 8.1, Windows 7, Windows Vista, Windows Server 2012 R2,

Windows Server 2008 R2 and Windows Server 2008 only) 55

4. Launch / Close OPC Server61

4.1 Launch OPC Server 61

4.2 Close OPC Server 63

4.3 About TC-net Type 64

4.4 About Version of OPC Server 65

4.5 Client Connection Status 65

5. Dual Function 67

5.1 Construction and outline 67

5.2 Dual state management 69

6. List of OPC Items 73

6.1 The List of OPC items 73

7. How to set the environment for OPC Server 77

7.1 How to set the environment for OPC Server 77

7.2 Log Output of Scan Memory Access Performance 90

7.3 Time adjusting function with TC-net 95

8. Log Save Tool 97

8.1 Outline of Log Save Tool 97

8.2 Launch / Close Log Save Tool 98

Contents

8.2.1 Launch Log Save Tool 98

8.2.2 Close Log Save Tool 100

8.3 Screen / Operation instructions 101

8.3.1 Screen instructions 101

8.3.2 Operation instructions 104

8.4 Decompress log files 105

8.4.1 How to Decompress log files 105

9. Log Decompress Tool 107

9.1 Outline of Log Decompress Tool 107

9.2 Setting-Up Log Decompress Tool 107

9.2.1 Installing Microsoft.Net Framework 2.0/3.5 108

9.2.2 Installing Log Decompress Tool 113

9.2.3 Uninstalling Log Decompress Tool 115

9.3. Launch Log Decompress Tool 117

9.4 Screen / Operation instructions 119

10. RAS function 121

10.1 RAS function 121

1. Outline of OPC Server

TC-net OPC Server is the local / remote server for OPC Data Access 2.05a /3.0 on Windows system.

It provides the environments in order to access scan memories of TC-net from OPC clients.

This chapter describes the outline, the movement environment and the construction of OPC Server.

1.1. Outline of OPC Server

OPC is open connectivity in industrial automation and the enterprise systems that support industry.

By using OPC, the application can access it without being conscious of the style of process data.

In addition, OPC succeeds to the client / server model based on OLE/COM technology of Microsoft.

It is not necessary for the OPC client to understand the access methods about the physics device by this.

A client can have access to an OPC server of the different vender by means same by using standardized

specifications (interface).

This OPC Server supports the following OPC interfaces.

◆DA2.05a (Data Access 2.05a)

◆DA3.0 (Data Access 3.0)

About details of OPC, refer to the following Web site.

Table 1.1 OPC URL

Web Site

URL

OPC Foundation

http://www.opcfoundation.org/

OPC Japan http://www.opcjapan.org/

OPC Europe

http://www.opceurope.org/

*)Above URL is as of March 2011.

1. Outline of OPC Server

1.2. Environments

TC-net OPC Server needs the following environments.

Table 1.2 Environments

Item

Condition

Processor Pentium® 4 Processor 3.0GHz or more

memory

1.0GB or more

Operating System Windows 8.1 Pro [x64]

Windows 7 Professional [x86/x64] SP1 or later

Windows Vista Ultimate / Enterprise SP1 or later

Windows Server 2012 R2 Standard [x64]

Windows Server 2008 R2 Standard [x64] SP1

Windows Server 2008 Standard [x86] SP2

Windows Server 2003 R2 SP2 or later

*1 : 64 bits version OS support is added in TC-

net OPC Server

V01.80, but execute TC-net OPC Server with 32 bits mode.

HDD Space Capacity

10MB or more

Needful package software TC-net100 PCI Bus Card Support Software (SEJTNI2A)

V01.30 or later

Important:V01.40 is necessary if the OS is Windows Server

2008 [x86] SP2.

TC-net100 PCI Express Bus Card Support Software (SEJTNEWA)

V01.01 or later --- for the 32 bits version OS

*This support was added in TC-net OPC Server V01.70.

TC-net100 PCI Express Bus Card Support Software (SHJTNR2A)

V01.20 or later --- for the 64 bits version OS

TC-net1G PCI Bus Card Support Software (SHJTGW8A)

V01.05 or later --- for the 32 bits version OS

*Support of TC-net1G added in TC-net OPC Server V01.60.

TC-net1G PCI Bus Card Support Software (SHJTGR2A)

V01.10 or later --- for the 64 bits version OS

Important:

There is a description of "TC-net OPC Server destination folder" in this manual,

but becomes the following folder when it is used the 64 bits version OS.

Destination folder in case of the 64 bits version OS:

C:\Program Files (x86)\Toshiba\TC_net OPC Server

Important

There is a description of System Folder (C:\Windows\System32) in this manual,

but becomes the following folder when it is used the 64 bits version OS.

System Folder in case of the 64 bits version OS:

C:\Windows\SysWOW64

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Server Handbücher

Toshiba

Toshiba MAGNIA 510D Montage- und Bedienungsanleitung

Toshiba

Toshiba Magnia 3135R Bedienungsanleitung

Toshiba

Toshiba SD-H400-S-TU Bedienungsanleitung

Toshiba

Toshiba C1 Bedienungsanleitung

Toshiba

Toshiba BMS-LSV6E Bedienungsanleitung

Toshiba

Toshiba RS-TX60 Bedienungsanleitung

Toshiba

Toshiba STRATA CIX Bedienungsanleitung

Toshiba

Toshiba IPedge EP Server Bedienungsanleitung

Toshiba

Toshiba IPedge EP Server Bedienungsanleitung

Toshiba

Toshiba BMS-LSV4E Bedienungsanleitung

Toshiba

Toshiba IPedge Bedienungsanleitung

Toshiba

Toshiba STRATA CS Communication Server Release 6 Bedienungsanleitung

Toshiba

Toshiba Magnia 3310 Bedienungsanleitung

Toshiba

Toshiba Magnia Z310 Bedienungsanleitung

Toshiba

Toshiba Magnia Z300 Bedienungsanleitung

Toshiba

Toshiba STRATA CS Communication Server Release 6 Bedienungsanleitung

Toshiba

Toshiba SG20 - Magnia - Web Server Bedienungsanleitung

Toshiba

Toshiba STRATA CIX Service-Handbuch

Toshiba

Toshiba SG20 - Magnia - Web Server Bedienungsanleitung

Toshiba

Toshiba Strata CIX40 R5.2 Software - R1 ~ R3... Handbuch

Toshiba

Toshiba BMS-LSV6UL Bedienungsanleitung

Toshiba

Toshiba STRATA CIX Handbuch

Toshiba

Toshiba RS-TX60 Bedienungsanleitung

Toshiba

Toshiba Strata Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung