Toshiba FlashAir W-02 Series Bedienungsanleitung

Initial Settings

Before using FlashAir™, be sure to change the password (security key) in one of the following

ways. If you fail to do so, your files (e.g. photos) may be stolen or hacked by a third party.

If you make the initial settings of the FlashAir in way of “1. Setting up the FlashAir using a Wi-

Fi device” and you use a smartphone or a tablet, the device will be registered as the

administrator device in the FlashAir. You can change the network settings or start Photoshare

on the FlashAir using the administrator device.

If you make the initial settings of FlashAir in way of “2. Setting up the FlashAir using FlashAir

Configuration Software” or using web browser on your PC, no device will be registered as the

administrator device in the FlashAir.

If you want to change the network settings or to start Photoshare on your FlashAir from a

smartphone or a tablet other than the administrator device, you can register the device as an

administrator device of the FlashAir by entering the “MASTERCODE”on the FlashAir App for

Android™ or iOS in one of the following ways. (In most cases, you will only have to enter the

MASTERCODE once for each device.)

●You can change the MASTERCODE on the FlashAir App using the administrator device of the FlashAir. Open

“FlashAir App” > ”Settings” > “FlashAir Settings” > ”Advanced setting” > “Change MASTERCODE” and

change the “MASTERCODE” to any code (12 alphanumeric characters). And then start to change the

network settings or Photoshare on the FlashAir App in the device you want to use. If you are prompted to

enter “MASTERCODE”, enter the changed “MASTERCODE”.

●Insert the FlashAir into a PC. Open “FlashAir Configuration Software” > “Initialize the card/change settings.”

and confirm the “MASTERCODE”(or change the “MASTERCODE” to any code (12 alphanumeric characters)).

And then start to change the network settings or Photoshare on the FlashAir App in the device you want to

use. If you are prompted to enter “MASTERCODE”, enter the confirmed (or changed) “MASTERCODE”.

*Note: After changing the “MASTERCODE”, it will not be available to change the network settings of the FlashAir

through web browser.

Changing the settings of FlashAir on FlashAir Configuration Software is available on a PC other

than the PC used to make the initial settings.

1. Setting up the FlashAir using a Wi-Fi device

To make the initial settings using an Android device or an iOS device, install and use the FlashAir

App for Android or iOS. If the FlashAir App do not work well on your Android / iOS device or if

you want to use another type of Wi-Fi device, make the initial settings in your web browser.

1-1. Setting up the FlashAir using FlashAir App for Android

Step 1

Install the FlashAir App for Android. You can find it by searching “FlashAir” on Google play™.

Step 2

Insert the FlashAir into a device (e.g. digital still camera) which is compatible with the card

capacity and the card type. Turn on the device.

●Within 5 minutes after turning on the device, complete Step3 and Step4. Without any connection from a

Wi-Fi device within 5 minutes, wireless LAN functionality of the FlashAir automatically turns off. If the

wireless LAN functionality turns off, turn on the device in which the FlashAir is inserted, and then turn on

the device again.

●When the device in which the FlashAir is inserted is turned off, the wireless LAN functionality of the FlashAir

also turns off. Extend the automatic power off time of the device to the longest period possible before doing

initial settings.

Step 3

Tap the app icon to open the app.

Step 4

The app connects to the FlashAir automatically. If there are some FlashAir around your Android

device, the list of FlashAir will be displayed. Select your FlashAir.

When the following screen is displayed, enter the default password “12345678” and tap “OK”.

Step 5

When the Setup screen appears, enter the network name you want to see in the list of networks

into the SSID field and the new password of the FlashAir into the Password field. The SSID can

be up to 32 alphanumeric characters. Choose a password between 8 and 63 alphanumeric

characters. Note that alphabetical characters are case-sensitive. Do not use a password that

could be easily guessed by somebody else, or a very simple password. We recommend you

make a note of your SSID and password.

Tap “Set”. The right screen in the following figures will be displayed. Then remove the FlashAir

from the device and insert it again. After that, turn on the device again.

After reboot, the app connects to the FlashAir again automatically.

This completes your initial settings.

1-2. Setting up the FlashAir using FlashAir App for iOS

Step 1

Install the FlashAir App for iOS. You can find it by searching “FlashAir” on App Store.

Step 2

Insert the FlashAir into a device (e.g. digital still camera) which is compatible with the card

capacity and the card type. Turn on the device.

●Within 5 minutes after turning on the device, complete Step3 and Step4. Without any connection from a

Wi-Fi device within 5 minutes, wireless LAN functionality of the FlashAir automatically turns off. If the

wireless LAN functionality turns off, turn on the device in which the FlashAir is inserted, and then turn on

the device again.

●When the device in which the FlashAir is inserted is turned off, the wireless LAN functionality of the FlashAir

also turns off. Extend the automatic power off time of the device to the longest period possible before doing

initial settings.

Step 3

Activate the Wi-Fi feature of your iOS device. When the device searches for available wireless

LAN networks, “flashair_xxxxxxxxxxxx (twelve alphanumeric characters)” should appear.

Step 4

Select “flashair_xxxxxxxxxxxx”. Enter the default password “12345678” for the network and tap

“Join”. And your iOS device can connect to the FlashAir.

Step 5

After the connection between your iOS device and FlashAir is established, tap the app icon to

open the app.

Step 6

When the Setup screen appears, enter the network name you want to see in the list of networks

into the SSID field and the new password of the FlashAir into the Password field. The SSID can

be up to 32 alphanumeric characters. Choose a password between 8 and 63 alphanumeric

characters. Note that alphabetical characters are case-sensitive. Do not use a password that

could be easily guessed by somebody else, or a very simple password. We recommend you

make a note of your SSID and password.

Tap “Set”. The right screen in the following figures will be displayed. Then remove the FlashAir

from the device and insert it again. After that, turn on the device again.

After reboot, connect to the FlashAir again by selecting changed SSID in the same way to Step

3. Enter the changed password for your FlashAir and tap “OK”, if required.

This completes your initial settings.

1-3. Setting up the FlashAir using Web browser

Step 1

Insert the FlashAir into a device (e.g. digital still camera) which is compatible with the card

capacity and the card type. Turn on the device.

●Within 5 minutes after turning on the device, complete Step2 and Step3. Without any connection from a

Wi-Fi device within 5 minutes, wireless LAN functionality of the FlashAir automatically turns off. If the

wireless LAN functionality turns off, turn on the device in which the FlashAir is inserted, and then turn on

the device again.

●When the device in which the FlashAir is inserted is turned off, the wireless LAN functionality of the FlashAir

also turns off. Extend the automatic power off time of the device to the longest period possible before doing

initial settings.

Step 2

Activate the Wi-Fi feature of your Wi-Fi device. When the device searches for available wireless

LAN networks, “flashair_xxxxxxxxxxxx (twelve alphanumeric characters)” should appear.

Step 3

Select “flashair_xxxxxxxxxxxx”. Enter the default password “12345678” for the network to

connect to the FlashAir.

●If you are using Android device, the message like "Sign in to network" may be displayed when the FlashAir

and the smartphone are connected. If so, use FlashAir App for Android.

●If you are using Android device, the pop up message like "Wi-Fi has no internet access" may be displayed

when the FlashAir and the smartphone are connected. If so, try the following steps. (If the pop up message

disappears, it will be displayed in the notification panel.) Tap the pop up message or notification on the

panel. The other pop up message "This network has no internet access. Stay connected?" will be displayed.

Tick the box “Don't ask again for this network”and tap "YES".

Step 4

Open the browser of the device and go to: http://flashair/

FlashAir W-02, W-03 and W-04 will go there automatically. If it does not go there automatically,

tap/click the refresh button of the browser. The screen may not refresh even if you tap/click the

refresh button. If this happens, type the above address into the address bar to go there.

Step 5

Tap/click the arrow button or the START button and go to the next page.

(For FlashAir Class6) (For FlashAir W-02, W-03 and W-04)

Step 6

When the Network settings screen appears, enter the network name you want to see in the list

of networks into the SSID field and the new password of the FlashAir into the Password field.

The SSID can be up to 32 alphanumeric characters. Choose a password between 8 and 63

alphanumeric characters. Note that alphabetical characters are case-sensitive. Do not use a

password that could be easily guessed by somebody else, or a very simple password. We

recommend you make a note of your SSID and password.

Tap/click the arrow button or the OK button.

(For FlashAir Class6) (For FlashAir W-02, W-03 and W-04)

When the following message appears, tap/click “OK”.

Then remove the FlashAir from the device and insert it again. After that, turn on the device

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Lagerung Handbücher

Toshiba

Toshiba MK2017GAP Bedienungsanleitung

Toshiba

Toshiba Canvio 640GB Bedienungsanleitung

Toshiba

Toshiba MK1060GSCX Konfigurationshandbuch

Toshiba

Toshiba MK6017MAP Betriebsanleitung

Toshiba

Toshiba STORE alu Bedienungsanleitung

Toshiba

Toshiba MK2003GAH Bedienungsanleitung

Toshiba

Toshiba MK4018GAS Bedienungsanleitung

Toshiba

Toshiba MQ01ABD series Bedienungsanleitung

Toshiba

Toshiba W7 Series Bedienungsanleitung

Toshiba

Toshiba XM-7002B Bedienungsanleitung

Toshiba

Toshiba MK1665GSX Bedienungsanleitung

Toshiba

Toshiba PH3064U-1EXB Bedienungsanleitung

Toshiba

Toshiba FlashAir W-03 Series Bedienungsanleitung

Toshiba

Toshiba HDD1422 Bedienungsanleitung

Toshiba

Toshiba MK1517GAP Kurzanleitung

Toshiba

Toshiba MKxx76GSX Bedienungsanleitung

Toshiba

Toshiba 593209-D0 Gebrauchs- und Wartungshandbuch

Toshiba

Toshiba MK4019GAX Bedienungsanleitung

Toshiba

Toshiba microSDXC UHS-? Bedienungsanleitung

Toshiba

Toshiba PX02SM Series Bedienungsanleitung

Toshiba

Toshiba CANVIO BASICS Bedienungsanleitung

Toshiba

Toshiba MK3021GAS Bedienungsanleitung

Toshiba

Toshiba CANVIO ADVANCE Bedienungsanleitung

Toshiba

Toshiba DT01ACA series Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

HP P9000 Bedienungsanleitung