Toshiba 4818-T10 Benutzerhandbuch

Toshiba Global Commerce Solutions

Operating System Installation Guide

4818-T10

Installing Windows 7/POSReady 7 (32 and 64 bit)

Requirements

Windows 7/POSReady 7 installation DVD

USB Keyboard and Mouse

External USB CD/DVD drive (if DVD feature not installed)

Configuring BIOS setup

To configure BIOS setup, complete the following steps:

Power on the system and enter BIOS setup by pressing the <DEL> key during POST.

Enter the 'Advanced’ page.

Set the ‘OS Selection’ item to ‘Windows 7’ option.

Press <F10> key to save data.

Installing the Windows 7/POSReady 7 drivers

Toshiba Global Commerce Solutions required drivers for Windows 7/POSReady 7

⚫Intel INF (Chipset) Driver

⚫Intel VGA Driver

⚫Realtek Audio Driver

⚫Realtek Ethernet Driver

⚫Intel TXE Driver

⚫Intel USB 3.0 Driver

⚫Nuvoton Serial Driver

Install the drivers in the following order.

Install the Intel INF (Chipset) Driver

Install the Intel VGA Driver

Install the Realtek Audio Driver

Install the Realtek Ethernet Driver

Install the Intel TXE Driver

Install the USB 3.0 Driver

Install the Nuvoton Serial Driver

If USB 3.0 operation is required, an additional BIOS setting must be modified. The USB 3.0 driver must be

installed and a registry patch is required. The USB 3.0 driver and the TGCS_Reg_Edits package are available

from the TGCS support site. Follow the steps below to configure the system for USB 3.0 operation.

To configure BIOS for USB 3.0 operation, complete the following steps:

Power on the system and enter BIOS setup by pressing the <DEL> key during POST.

Enter the 'Advanced’ page.

Enter the 'South Cluster Configuration’ sub-page.

Enter the 'USB Configuration’sub-page.

Set the 'XHCI mode' item to ‘Smart Auto' option.

Press <F10> to save and restart.

Power on and into Windows 7, install USB 3.0 driver.

After complete install, power on the system and enter BIOS setup by pressing the <DEL> key during POST.

Enter the 'Advanced’ page.

10.

Enter the 'South Cluster Configuration’ sub-page.

11.

Enter the 'USB Configuration’ sub-page.

12.

Set the 'XHCI mode' item to ‘Enable' option.

13.

Press <F10> key to save and restart.

Installing Windows 10 (32 and 64 bit)

The Windows 10 installation process fully supports the Toshiba Global Commerce Solutions 4818-T10

Models. No special considerations need to be made when installing the operating system. You can use the

following method to install the operating system.

Requirements

Windows 10 installation DVD

USB Keyboard and Mouse

External USB CD/DVD drive (if DVD feature not installed)

Configuring BIOS setup

To configure BIOS setup, complete the following steps:

Power on the system and enter BIOS setup by pressing the <DEL> key during POST.

Enter the 'Advanced’ page.

Set the ‘OS Selection’ item to ‘Windows 8.X/10’ option.

Press <F10> key to save and restart.

Installing the Windows 10 drivers

Toshiba Global Commerce Solutions required drivers for Windows 10

Intel INF (Chipset) Driver

Intel VGA Driver

Realtek Audio Driver

Realtek Ethernet Driver

Intel TXE Driver

Nuvoton Serial Driver

Install the drivers in the following order.

Install the Intel INF (Chipset) Driver

Install the Intel VGA Driver

Install the Realtek Audio Driver

Install the Realtek Ethernet Driver

Install the Intel TXE Driver

Install the Nuvoton Serial Driver

If USB 3.0 operation is required, an additional BIOS setting must be modified. Follow the steps below to configure

the system for USB 3.0 operation.

To configure BIOS for USB 3.0 operation, complete the following steps:

Power on the system and enter BIOS setup by pressing the <DEL> key during POST.

Enter the 'Advanced’ page.

Enter the 'South Cluster Configuration’ sub-page.

Enter the 'USB Configuration’ sub-page.

Set the 'XHCI mode' item to ‘Enable' option.

Press <F10> key to save and restart.

Andere Handbücher für 4818-T10

Inhaltsverzeichnis

Andere Toshiba Touch-Terminal Handbücher

Toshiba

Toshiba ST-B10 SERIES Bedienungs- und Wartungsanleitung

Toshiba

Toshiba ST-A10 SERIES Bedienungsanleitung

Toshiba

Toshiba ST-71 SERIES Bedienungsanleitung

Toshiba

Toshiba ST-7000-C Series Bedienungsanleitung

Toshiba

Toshiba TEC POS ST-5600 Series Bedienungsanleitung

Toshiba

Toshiba ST-70 SERIES Bedienungsanleitung

Toshiba

Toshiba ST-B10 SERIES Bedienungsanleitung

Toshiba

Toshiba ST-A20 SERIES Bedienungsanleitung

Toshiba

Toshiba 4818-T10 Bedienungsanleitung

Toshiba

Toshiba TFTST-76T-5A SERIES Bedienungsanleitung

Toshiba

Toshiba 4818-ET1 Bedienungsanleitung

Toshiba

Toshiba ST-7000 Series Bedienungsanleitung

Toshiba

Toshiba 4818-T10 Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung