Tosot SMART INVERTER Series Bedienungsanleitung

Split Air Conditioner

SMART INVERTER Series

MODELS:

OWNER’S MANUAL

For proper operation, please read and keep

this manual carefully.

GS-07D

GS-09DW

GS-12DW

GS-18DW

GS-24DW

Precautions

WARNING

Do not connect air conditioner to multi-purpose socket.

This appliance can be used by children aged from 8

Operation and Maintenance

If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

Do not spray water on indoor unit. It may cause electric

shock or malfunction.

Otherwise, it may cause fire hazard.

Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

Do not wash the air conditioner with water to avoid

electric shock.

After removing the filter, do not touch fins to avoid injury.

Do not use fire or hair dryer to dry the filter to avoid

deformation or fire hazard.

Do disconnect power supply when cleaning air

conditioner. Otherwise, it may cause electric shock.

Precautions

Do not block air outlet or air inlet. It may cause

malfunction.

remote controller may be broken.

●Power cord is overheating or damaged.

●There’s abnormal sound during operation.

●Circuit break trips off frequently.

●Air conditioner gives off burning smell.

●Indoor unit is leaking.

contact the dealer or qualified professionals for service.

When turning on or turning off the unit by emergency

operation switch, please press this switch with an insulating

object other than metal.

outlet. It may cause personal injury or damage.

WARNING

conditioner and disconnect power immediately, and then

If the air conditioner operates under abnormal conditions,

it may cause malfunction, electric shock or fire hazard.

Do not spill water on the remote controller, otherwise the

electric shock or damage. Please contact dealer when

you need to repair air conditioner.

Do not repair air conditioner by yourself. It may cause

objects. It may cause damage or personal injury.

Do not step on top panel of outdoor unit, or put heavy

When below phenomenon occurs, please turn off air

Do not extend fingers or objects into air inlet or air

Maintenance must be performed by qualified

professionals. Otherwise, it may cause personal injury

or damage.

Do install the circuit break. If not, it may cause malfunction.

According to the local safety regulations, use qualified

power supply circuit and circuit break.

WARNING

Must follow the electric safety regulations when installing

the unit.

Be sure to cut off the power supply before proceeding

any work related to electricity and safety.

Don't use unqualified power cord.

Make sure the power supply matches with the requirement

of air conditioner. Unstable power supply or incorrect wiring

may result in electric shock, fire hazard or malfunction.

Please install proper power supply cables before using the

air conditioner.

Properly connect the live wire, neutral wire and

grounding wire of power socket.

Installation must be performed by qualified professionals.

Otherwise, it may cause personal injury or damage.

Attachment

An all-pole disconnection switch having a contact separation

of at least 3mm in all poles should be connected in fixed

wiring.

Including an circuit break with suitable capacity, please

note

the following table. Air switch should be included

magnet buckle

and heating buckle function, it can protect

the circuit-short and

overload.

Air Conditioner should be properly grounded. Incorrect

grounding may cause electric shock.

Precautions

Installation must be performed in accordance with the

persons in order to avoid a hazard.

must be properly grounding with specialized grounding

device by a professional. Please make sure it is always

grounded effectively, otherwise it may cause electric shock.

The appliance must be positioned so that the plug is

accessible.

If the length of power connection wire is insufficient, please

contact the supplier for a new one. Avoid extending the

wire by yourself.

All wires of indoor unit and outdoor unit should be

connected by a professional.

national wiring regulations.

requirement of NEC and CEC by authorized personnel

only.

WARNING

wire, which can't be used for other purposes.

The grounding resistance should comply with national

electric safety regulations.

The air conditioner is the first class electric appliance. It

keep the interconnection cable away from the copper

tube.

The temperature of refrigerant circuit will be high, please

the manufacturer, its service agent or similarly qualified

If the supply cord is damaged, it must be replaced by

The yellow-green wire in air conditioner is grounding

The appliance shall be installed in accordance with

Do not put through the power before finishing installation.

Precautions

The indoor unit should be installed close to the wall.

Instructions for installation and use of this product are

provided by the manufacturer.

WARNING

place, only the qualified person can perform the work.

Otherwise, it may cause personal injury or damage.

If you need to relocate the air conditioner to another

must be installed in the line.

For the air conditioner without plug, an circuit break

far away from animals or plants.If it is unavoidable,

please add the fence for safety purpose.

Select a location which is out of reach for children and

reachable after finishing installation.

For the air conditioner with plug, the plug should be

Working temperature range

NOTICE:

Indoor side DB/WB(℃) Outdoor side DB/WB(℃)

Maximum cooling 32/23 43/26

Maximum heating 27/- 24/18

●The operating temperature range (outdoor temperature) for cooling only unit is

-15℃~ 43℃; for heat pump unit is -15℃~ 43℃.

(Display content or position may be different from above

graphics, please refer to actual products)

Parts Name

Indoor Unit

remote controller

NOTICE:

Actual product may be different from above graphics, please refer

to actual products.

(Display content or position may be different from above

graphics, please refer to actual products)

air inlet

panel

aux.button

horizontal louver

air outlet

temp. indicator power indicator

receiver window

Buttons on remote controller

Introduction for icons on display screen

ON/OFF button

▲ button

FAN button

SWING button

TIMER OFF button

TURBO button

TEMP button

WiFi button

button

CLOCK button

TIMER ON button

SLEEP button

Send signal

Turbo mode

8℃heating function

Set temperature

Set time

TIMER ON /

TIMER OFF

Child lock

Up & down swing

Set fan speed

ventilation operation

Light Temp. display type

:Set temp.

:Outdoor ambient temp. :Indoor ambient temp.

Sleep mode

Clock

Heat mode

Fan mode

Dry mode

Cool mode

Auto mode

Operation mode

I feel

X-FAN button

MODE button

▲

button

health function

X-fan mode

WiFi This is a general remote controller.Some

models have this function while some

do not. Please refer to the actual models.

{

●This is a general use remote controller, it could be used for the air conditioners

●

●Under off status, set temperature and clock icon will be displayed on the display

* Note: Only for models with heating function.

, or is sent out,

Introduction for buttons on remote controller

Note:

with multifunction; For some function, which the model doesn't have, if press

the corresponding button on the remote controller that the unit will keep the

original running status.

After putting through the power, the air conditioner will give out a sound.

Operation indicator " " is ON (red indicator, the colour is different for different

models). After that, you can operate the air conditioner by using remote controller.

Under on status, pressing the button on the remote controller, the signal icon " "

on the display of remote controller will blink once and the air conditioner will give

out a “di” sound, which means the signal has been sent to the air conditioner.

ON/OFF button

Press this button to turn on the unit. Press this button again to turn off the unit.

▲ button

Press this button to increase set temperature. Holding it down above 2 seconds

rapidly increases set temperature. In AUTO mode, set temperature is not adjustable.

3MODE button

Each time you press this button,a mode is selected in a sequence that goes from

AUTO, COOL, DRY, FAN, and HEAT *, as the following:

AUTO COOL DRY FAN HEAT*

After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will

not be displayed on the LCD, and the unit will automatically select the suitable opera-

tion mode in accordance with the room temperature to make indoor room comfortable.

4SWING button

Press this button to set up & down swing angle, which circularly changes as below:

OFF

This remote controller is universal . If any command

the unit will carry out the command as

indicates the guide louver swings as:

of remote controller (If timer on, timer off and light functions are set, the corre-

sponding icons will be displayed on the display of remote controller at the same

time); Under on status, the display will show the corresponding set function icons.

Introduction for buttons on remote controller

FAN button

CLOCK button

This button is used for setting Fan Speed in the sequence that goes from AUTO,

TIMER OFF button

Press this button to initiate the auto-off timer. To cancel the auto-timer program,

simply press the button again.TIMER OFF setting is the same as TIMER ON.

Press CLOCK button, blinking. Within 5 seconds, pressing ▲ or button adjusts

TIMER ON button

Press this button to initiate the auto-ON timer. To cancel the auto-timer program, simply

press this button again.

After press of this button, disappears and "ON "blinks.

00:00 is displayed for ON time

setting. Within 5 seconds, press ▲ or button to adjust the

time value. Every press of

either button changes the time setting by 1 minute. Holding down either button rapidly

changes the time setting by 1 minute and then 10 minutes. Within 5 Seconds after

setting, press TIMER ON button to confirm.

the present time. Holding down either button above 2 seconds increases or decreases

the time by 1 minute every 0.5 second and then by 10 minutes every 0.5 second. During

blinking after setting, press CLOCK button again to confirm the setting, and then

will be constantly displayed.

, to , then back to Auto. Auto

Low speed Medium speed High speed

▲

button

Press this button to decrease set temperature. Holding it down above 2 seconds

rapidly decreases set temperature. In AUTO mode, set temperature is not adjustable.

▲

This function indicates that moisture on evaporator of indoor unit will be blowed

after the unit is stopped to avoid mould.

Having set X-FAN function on: After turning off the unit by pressing ON/OFF

button indoor fan will continue running for a few minutes. at low speed. In this

period, Hold fan speed button for2s to stop indoor fan directly.

Having set X-FAN function off: After turning off the unit by pressing ON/OFF

button, the complete unit will be off directly.

X-FAN function Hold fan speed button for 2s in COOL or DRY mode, the icon “ ” is

displayed and the indoor fan will continue operation for a few minutes in order to dry

the indoor unit even though you have turned off the unit. After energization, X-FAN

OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.

●

Note:

● It’s Low fan speed under Dry mode.

● Under AUTO speed, air conditioner will select proper fan speed automatically

according to ex-factory setting.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Tosot Klimaanlage Handbücher

Tosot

Tosot TPAC10S-C116A1 Bedienungsanleitung

Tosot

Tosot TKH12K3FI Bedienungsanleitung

Tosot

Tosot ORBIS Series Bedienungsanleitung

Tosot

Tosot MTS2R-18HDI Bedienungsanleitung

Tosot

Tosot GWH09AFC-A3DNA2A/I Bedienungsanleitung

Tosot

Tosot TW09HXP2A1A Bedienungsanleitung

Tosot

Tosot PAT Series Bedienungsanleitung

Tosot

Tosot GWH09QCXB-D3DND4B/O Bedienungsanleitung

Tosot

Tosot WAT Series Bedienungsanleitung

Tosot

Tosot DC Inverter U-match Series Bedienungsanleitung

Tosot

Tosot GWH09AAB-K6DNA5A/I Bedienungsanleitung

Tosot

Tosot TW09HQ3D6DO Bedienungsanleitung

Tosot

Tosot TW09HQ2C2AO Bedienungsanleitung

Tosot

Tosot GPH10ARC-A6NNA1A Bedienungsanleitung

Tosot

Tosot PAT Series Bedienungsanleitung

Tosot

Tosot TW12HQ3C2AI Bedienungsanleitung

Tosot

Tosot MONA-20 Bedienungsanleitung

Tosot

Tosot TWH09UB-K3DNA2E Bedienungsanleitung

Tosot

Tosot TM09HBTDI Bedienungsanleitung

Tosot

Tosot GJC08BU-A6NRNJ2A Bedienungsanleitung

Tosot

Tosot TM24H5O Bedienungsanleitung

Tosot

Tosot Free match Series Bedienungsanleitung

Tosot

Tosot TM12HKDI Bedienungsanleitung

Tosot

Tosot GWH09AGA-K6DNA1A Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung