5
OPERATION
Caution!
Caution!
Finish operation, pull out the
emergency key and keep it in a
safe place.
Replace 4 fresh batteries by lin-
ing them up in a manner as indi-
cated by the “+ “ and “ - “ signs.
When outage, you should reset
the user’s code.
Inserting the batteries
● Open the door
● Insert 4 x AA batteries into the bat-
tery compartment.
● Under normal circumstances, if the
battery status light is on, it means
that the voltage is low, and a new
battery should be inserted.
Mounting method
(see Dia A)
Fix the safe in the place which is not
easy to move.
● Drill holes for expansion bolts (or
clamping screws) in the right place.
● Turn the expansion bolts counter-
clockwise to separate.
● Use the expansion bolts (or clamping
screws) to secure the case to the
wall.
● Make sure the case is mounted in
place as required and then tighten all
screws.
Electronic safe
Please do not keep emergency keys in
your safe!
Dear valued customer:
Thank you for choosing our products!
You’ve taken an important Step in
organizing and protecting your most
valued possessions. Every series of
our safes is professionally made and
designed to provide safety. Please
take time to read and familiarize your-
self with the proper operating proce-
dures of your new safe presented on
the following pages. Again, thank you
for choosing our products!
Opening your safe for the
rst time
Upon rst opening, users should open
the safe with the emergency key. The
operation in details refers to “opening
the safe with the emergency key”.
● Remove emergency lock cover, then
insert the emergency key, and turn it
counter clockwise.
● Turn the knob (master key) clockwise
to open the door.
Opening door
● Input your user’s code (3 to 8 digits),
each pressing results one buzzer
beep.
● Press “#” button, the green light will
be on.Rotate the knob (master key)
clockwise and pull outwards within 5
seconds, the door is opened.
