TotalPond A20010 Bedienungsanleitung

ITEM # A20010

Starter Pond Kit

PACKAGE CONTENTS

Part Description Quantity

A Pump 1

B Adapter 1

C Filter block 1

D Filter cover 1

E Coupler 1

F 3-tier fountain head 1

G Extension tube 2

H Fountain head base 1

I Waterbell fountain head 1

J Trumpet fountain head 1

K Foam-jet fountain head 1

L PVC pond liner (7 ft. x 10 ft.) 1

M Floating Lilies 3

Questions, problems, missing parts?

Before returning

to your retailer, call our customer service department at

1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday, or

email us at customercare@geoglobalpartners.com. Or

visit our website www.totalpond.com.

REMINDER

CALL 1-888-412-6001

BEFORE RETURNING TO STORE.

WARNINGS AND CAUTIONS – PUMP

WARNING

•Risk of electrical shock. This pump is supplied with a grounding conductor and grounding–type

attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly

grounded, grounding-type receptacle (GFCI).

•Do not exceed the voltage shown on the pump.

•Always disconnect pump from the power source before beginning any maintenance or work on the

pump.

•Inspect cord for damage before installation and/or maintenance. Replace the entire pump assembly if

damage is found.

•Do not remove the grounding pin from the power cord plug.

•To reduce the risk of electric shock, use only on portable, self-contained fountains no larger than 5 ft. in

any dimension.

•Risk of electrical shock – This pump has not been investigated for use in swimming pools or marine

areas.

CAUTION

•This pump has been evaluated for use with water only.

•Use a proper power source as indicated on the pump label.

•Keep the cord away from high temperatures or other heat sources.

•Do not pump heated liquids.

•Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.

•Operate in fresh water only. Avoid heavily chlorinated water and water with high pH levels.

•Do not lift the pump by its power cord.

PREPARATION

–

LINER

Before installing your pond liner, make sure it is in good condition with no tears or holes. If you find any

damage, do not attempt to install the liner. Contact customer service for a replacement.

•Estimated Assembly Time: 2 hours

•Tools Required for Assembly: Sand, Shovel.

NOTES

–

LINER

Calculate the dimensions of your pond. Your pond should be at least 18 in. deep at the deepest point.

Allow for a 10 in. overlap around the perimeter of the pond. The 7 ft. x 10 ft. liner will create a pond that is

approximately 3 ft. x 6 ft. x 18 in. deep. It will hold approximately 200 gal. of water.

INSTALLATION INSTRUCTIONS

–

LINER

1. Use sand to mark the outline of your pond. Fig. 1

Fig. 1

2. Dig out your pond and remove any debris or rocks that might

damage your liner. Add approximately 2 in. of sand to the

pond area. The sand functions as a cushion beneath your

pond liner. Spread the sand over the entire area and

compact it. Fig. 2

Fig. 2

3. Open the liner and drape it across the pond area, making

sure to leave at least 10 in. of overlap around the perimeter of

the hole. Begin to fill the pond with water, smoothing out any

wrinkles as you do this. Fig. 3

Fig. 3

4. When the pond is full, bury the excess liner in a small trench

around your pond with stones and rocks, according to your

landscape design. Fig. 4

Fig. 4

ASSEMBLY INSTRUCTIONS

–

PUMP AND PREFILTER

1. Place the filter block inside the filter cover. Fig. 5

Fig. 5

2. Connect the pre-filter to the pump. Fig. 6

Fig. 6

ASSEMBLY INSTRUCTIONS

–

FOUNTAIN HEAD KIT

1. Connect the two extension tubes with the coupler. Fig. 7

Fig. 7

Filter block

Filter cover

Pump

Pre-Filter

Extension

tube

Extension

tube

Coupler

2. Choose a fountain head for the desired water effect, and

assemble your choice as shown in Fig. 8

Fig. 8

3. Insert the assembled fountain head kit onto the outlet of the

pump using the adaptor supplied in the kit. Fig. 9

Fig. 9

CARE AND MAINTENANCE

Pump

•Keep water clean to prolong the life of the pump. Use of distilled water will reduce mineral deposits.

•Regular cleaning of the pump may be necessary depending upon the environment in which it is

operated. Clean the pump when it is visibly soiled or when a drop in performance is detected.

•Before cleaning, always disconnect the pump from the power source.

•Remove all parts from the pump and clean in warm, soapy water.

•Disassemble the pump cover and remove the impeller cover to expose the impeller assembly.

Remove the impeller assembly by gently pulling on the impeller blades. Use a soft cloth or brush

to clean the impeller assembly and the inside of the impeller housing.

TROUBLESHOOTING

If the pump fails to operate:

•Check to make sure the power cord is plugged in and the pump is getting power.

•Check the pump outlet and any tubing, fountains, spitters etc. for kinks or obstructions.

•Remove the inlet screen and/or pump cover, and impeller cover to expose the impeller. Turn

the impeller to ensure that it is not broken or jammed.

If the performance of the pump is not satisfactory or the pump does not flow evenly:

•Check to make sure the pump is completely submerged in water.

•Check to make sure the impeller and the housing are clean.

Extension tube

Adapter

Pump

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department

at 1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday.

Printed in China

Part Description

B Adapter

C Filter block

D Filter cover

E Coupler

F 3-tier fountain head

G Extension tube

H Fountain head base

I Waterbell fountain head

J Trumpet fountain head

K Foam-jet fountain head

N Impeller cover

O O-ring

P Shaft support

Q Impeller assembly

R Shaft

LIMITED WARRANTY

All pumps and electrical products are warranted to the user against defective material and workmanship,

under normal working conditions. This warranty period begins on the date of purchase by the original

purchaser.

All TotalPond® electrical products are warranted to the user against defective material and workmanship,

under normal working conditions for 1 year from the date of purchase. All TotalPond® liners are warranted

to the user against defective workmanship, under normal working conditions for 20 years from the date of

purchase. All other TotalPond® product is warranted to the user against defective material and

workmanship, under normal working conditions for 90 days.

Application

Warranty covers only properly installed and maintained units. Pump warranty is limited to applications

pumping fresh water in a pond or fountain only. Other liquid applications or extreme temperature uses

must be approved in writing by the manufacturer. Receipt and product date code are required for warranty

claims.

Warranty Claim

Warranty claims must be made by calling customer service (at 1-888-412-6001). If the item is

determined to be defective, you will be given authorization to return the defective part(s), freight pre-paid,

along with proof of purchase.

Disposition

The manufacturer will make a good faith effort for prompt disposition regarding all warranty claims.

Returned product will be inspected to determine cause of failure before warranty is applied. Warranty does

not cover any costs associated with the shipping, handling, installation or removal of products or parts

subject to this warranty. For products damaged in transit, a claim should be filed with the carrier.

Disclaimer

Any oral statements made about the product by the seller, the manufacturer, the representatives, or any

other parties do not constitute warranties, should not be relied upon by the user, and are not part of the

contract for sale. The seller’s and manufacturer’s only obligation, and buyer’s only remedy shall be for the

manufacturer to either replace and/or repair at the manufacturer’s sole discretion, the product as described

above. Neither seller nor the manufacturer shall be liable for injury, loss or damages for lost profits, lost

sales, injury to person or property, or any other incidental or consequential loss arising from any cause

whatsoever, no matter whether based upon warranty, contract, negligence or other misuse, and the buyer

and user agree that no other remedy shall be available to them. Before using, the buyer and user shall

determine the suitability of the product for the intended use, and assume all risk and liability whatsoever in

connection therewith. The warranty and remedy described in this limited warranty is an exclusive warranty

and remedy in lieu of any other warranty or remedy expressed or implied. All other warranties and

remedies are hereby expressly excluded, including but not limited to any implied warranty of

merchantability of fitness for any particular purpose. This warranty gives the buyer and user specific legal

rights, and buyer and user may also have other rights which vary from state to state. Some states do not

allow exclusions or limitations of incidental or consequential damages, so the above limitations or

exclusions may not apply to you.

REMINDER

CALL 1-888-412-6001

BEFORE RETURNING TO STORE.

Inhaltsverzeichnis

Andere TotalPond Rasen- und Gartengeräte Handbücher

TotalPond

TotalPond 52547 Bedienungsanleitung

Beliebte Rasen- und Gartengeräte Handbücher anderer Marken

Vertex

Vertex 1/3 HP Technische Daten

GHE

GHE AeroFlo 80 Bedienungsanleitung

Millcreek

Millcreek 406 Bedienungsanleitung

Land Pride

Land Pride Post Hole Diggers HD25 Bedienungsanleitung

Yazoo/Kees

Yazoo/Kees Z9 Commercial Collection System Z9A Programmierhandbuch

Premier designs

Premier designs WindGarden 26829 Bedienungsanleitung

Snapper

Snapper 1691351 Bedienungsanleitung

Mosquito Magnet

Mosquito Magnet Patriot Bedienungsanleitung

Perfect

Perfect BG2 Bedienungsanleitung

P.Lindberg

P.Lindberg LS2 Bedienungsanleitung

Gardena

Gardena Easy 1887 Bedienungsanleitung

Makita

Makita UM104D Bedienungsanleitung

AQUA FLOW

AQUA FLOW PNRAD Bedienungsanleitung

Tru-Turf

Tru-Turf RB48-11A Golf Green Roller Benutzerhandbuch

BIOGROD

BIOGROD 730710 Bedienungsanleitung

Land Pride

Land Pride RCF2784 Bedienungsanleitung

Makita

Makita UM110D Bedienungsanleitung

BOERBOEL

BOERBOEL Standard Floating Bar Gravity Latch Bedienungsanleitung