TotalPond 52213 Bedienungsanleitung

TotalPond

Item | Article | Artículo #52213, 52217, 52216, 52228

70-500 GPH

FOUNTAIN PUMPS

265-1893 LPH

POMPES POUR FONTAINE

265-1893 LPH BOMBAS DE FUENTE

#52217

#52213

#52228

#52216

English

TABLE OF CONTENTS

4-5 Warnings and Cautions

6Preparation

6Package Contents

7Operating Instructions

7-8 Specications / Pump Performance

9Product Registration

10-11 Maintenance & Troubleshooting

11-13 Replacement Parts / Limited Warranty

Française

TABLE DES MATIÈRES

14-15 Avertissements et mises en garde

16 Préparation

16 Contenu de l’emballage

17 Instructions d’utilisation

17-18 Spécications / Performances de la pompe

19 Enregistrement

20-21 Entretien et Dépannage

21-23 Pièces de rechange / Garantie limitée

TABLE OF CONTENTS

4-5 Warnings and Cautions

6Preparation

6Package Contents

7Operating Instructions

7-8 Specications / Pump Performance

9Product Registration

10-11 Maintenance & Troubleshooting

11-13 Replacement Parts / Limited Warranty

TABLE DES MATIÈRES

14-15 Avertissements et mises en garde

16 Préparation

16 Contenu de l’emballage

17 Instructions d’utilisation

17-18 Spécications / Performances de la pompe

19 Enregistrement

20-21 Entretien et Dépannage

21-23 Pièces de rechange / Garantie limitée

Español

TABLA DE CONTENIDO

24-25 Advertencias y precauciones

26 Preparación

26 Contenido del Paquete

27 Instrucciones de Funcionamiento

27-28 Especicaciones / Rendimiento de la Bomba

29 Registración del Producto

30-31 Mantenimiento y Solución de problemas

31-33 Piezas de repuesto / Garantía limitada

Visit WWW.TOTALPOND.COM for information and tips.

IMPORTANT SAFETY INFORMATION

Please read these instructions carefully prior to starting up the

unit!

The water system on which the operation of this product

is based requires utmost care and maintenance, possibly

also the use of chemicals, in order to prevent and keep

the occurrence of micro-organisms and harmful bacteria,

especially legionellae that are responsible for legionnaire’s

disease, under control. Non-observance of this information

about correct maintenance and care can entail the spreading

of harmful bacteria. Due to the fact that for decorative

purposes, water nozzles distribute water in the air, water

droplets containing harmful bacteria can enter your lungs and

cause life-threatening diseases.

It is the responsibility of the owner of the water system and

its attendant units to ensure their maintenance and care

in compliance with the laws, directives and instructions

laid down for this purpose. In order to avert harmful

contamination, we urgently recommend the user to ensure

cleaning and care of the water system and the water feature

including the nozzle, and to take all necessary measures

to maintain the technical units, such as pumps, tubing,

connectors, underwater lighting, and nozzles to keep them

in functional order in line with safety aspects. However, the

maintenance and care obligation is not limited to the technical

products supplied, but encompasses the entire system.

We also recommend the owner to keep records of the dates

when maintenance and care was carried out, and to document

WARNINGS AND CAUTIONS

Questions, problems, missing parts? Contact

Customer Care Monday - Friday

1-888-412-6001 customercare@totalpond.com

Thank you for choosing TotalPond®

Please call Customer Care before returning item to store: 1-888-412-6001 5

all water tests made in conjunction with the water feature. The

owner is solely responsible for guaranteeing the safety of the

water feature. Use or maintenance of the units sold and the

system are beyond GeoGlobal Partner’s inuence. GeoGlobal

Partners can only be held liable for manufacturing faults of

TotalPond

units.

WARNING

• Risk of electrical shock. This pump is supplied with a

grounding conductor and grounding-type attachment

plug. To reduce the risk of electric shock, be certain that it

is connected only to a properly grounded, grounding-type

receptacle.

• Do not exceed the voltage shown on the pump.

• Always disconnect pump from the power source before

beginning any maintenance or work on the pump.

• Inspect cord for damage before installation and/or

maintenance. Replace the entire pump assembly if damage

is found.

• Do not remove the grounding pin from the power cord plug.

• To reduce the risk of electric shock, use only on portable,

self-contained fountains no larger than 5 ft. in any

dimension.

• Risk of electrical shock - This pump has not been

investigated for use in swimming pool or marine areas.

CAUTION

• This pump has been evaluated for use with fresh water only.

• Use a proper power source as indicated on the pump label.

• Keep the cord away from high temperatures or other heat

sources.

• Do not pump heated liquids.

• Do not let the pump run dry. Pump must be completely

submerged for proper operation and cooling.

• Operate in freshwater only. Avoid heavily chlorinated water

and water with high pH levels.

• Do not lift the pump by its power cord.

Visit WWW.TOTALPOND.COM for information and tips.

PACKAGE CONTENTS

PREPARATION

Before beginning assembly or operation of product,

make sure all parts are present. Compare parts with

package contents list and diagram. If any part is missing or

damaged, do not attempt to assemble, install or operate

the product. Contact Customer Care for replacement parts.

• Estimated assembly time: 5 minutes.

• No tools required for assembly.

Part Description Qty

APump 1

B3/8 in. ID Tubing Adapter (52213, 52217) 1

C1/2 in. ID Tubing Adapter (52213, 52217, 52216) 1

D3/4 in. ID Tubing Adapter (52216) 1

E1/2 in. ID Tubing Adapter (52228) 1

F5/8 in. ID Tubing Adapter (52228) 1

G3/4 in. ID Tubing Adapter (52228) 1

CBD

Please call Customer Care before returning item to store: 1-888-412-6001 7

OPERATION INSTRUCTIONS

Step 1. Adjust the ow control

to the lowest setting. Once the

pump has been turned on (after

step 3) you may adjust the ow

control to the preferred setting.

Step 2. Connect tubing to the

outlet of the pump with the

appropriate adapter.

NOTE: Tubing not included.

Step 3. Place the pump into

the water and connect to a

properly grounded electrical

outlet.

Tubing

GFCI

outlet

SPECIFICATIONS

Pump #52213 #52217

Max Flow Rate 100 GPH (at 0 ft.) 150 GPH (at 0 ft.)

Max Pumping Height 2.8 ft. (at 0 GPH) 3.7 ft (at 0 GPH)

Ideal Pumping Height 1.5 ft. (at 65 GPH) 3 ft (at 45 GPH)

Power Consumption 5 watts / 0.06 amps 7 watts / 0.1 amps

Cord Length 6 ft. 6 ft.

Visit WWW.TOTALPOND.COM for information and tips.

Flow Rates (GPH)

Lift (feet)

Ideal pumping range

7 90

6 174

5 102 259

4 148 311

3 45 190 359

2 40 79 253 422

174 115 296 475

0 100 150 338 533

52213 52217 52216 52228

Pumps

To measure ideal pumping

height, measure from the

waterline up.

Note: using excessive tubing

longer than the ideal pumping

height will result in reduced

water ow.

Pump #52216 #52228

Max Flow Rate 338 GPH (at 0 ft.) 533 GPH (at 0 ft.)

Max Pumping Height 6.2 ft. (at 0 GPH) 8 ft. (at 0 GPH)

Ideal Pumping Height 5 ft. (at 102 GPH) 7 ft. (at 90 GPH)

Power Consumption 23 watts / 0.4 amps 42 watts / 0.6 amps

Cord Length 16 ft. 16 ft.

SPECIFICATIONS (cont.)

Please call Customer Care before returning item to store: 1-888-412-6001 9

Use your smartphone camera

to scan the QR code or visit our

website totalpond.com/register

The 14 digit serial number located on the pump

___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

Date of purchase:

___ /___ /___

Item number:

______

Before installing your pump please write down the

following information:

00000000000000

Pump date code:

____ /____

mm yy

item number

Visit WWW.TOTALPOND.COM for information and tips.

Step 1. Before cleaning,

always disconnect the

pump from the power

source and remove the

pump cover.

Step 2. Remove the

impeller cover to

expose the impeller

assembly. Remove the

impeller assembly by

gently pulling on the

impeller blades. The

impeller is held in place

by a magnet.

Step 3. Use a soft cloth or brush and warm water to clean

the impeller and the inside of the impeller housing.

Step 4. Reassemble all pump parts and place in water

before reconnecting to the power source.

Regular cleaning of the pump may be necessary depending

upon the environment which it is operated. Clean the pump

when it is visibly soiled or when a drop in performance is

detected.

1 2

3 4

MAINTENANCE & TROUBLESHOOTING

Always disconnect units from the power source

before beginning any maintenance or work on

the unit.

Andere Handbücher für 52213

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere TotalPond Teichpumpe Handbücher

TotalPond

TotalPond 52323 Bedienungsanleitung

TotalPond

TotalPond 52223 Bedienungsanleitung

TotalPond

TotalPond 52299 Bedienungsanleitung

TotalPond

TotalPond 52325 Bedienungsanleitung

TotalPond

TotalPond 52323 Bedienungsanleitung

TotalPond

TotalPond 52676 Bedienungsanleitung

TotalPond

TotalPond DD11210 Bedienungsanleitung

TotalPond

TotalPond 52676 Bedienungsanleitung

Beliebte Teichpumpe Handbücher anderer Marken

Oase

Oase PondJet Eco Bedienungsanleitung

Profi-pumpe

Profi-pumpe Rügen Bedienungsanleitung

HEISSNER

HEISSNER F540-00 Bedienungsanleitung

1A Profi Handels

1A Profi Handels OASIS 501R-1 Bedienungsanleitung

Biotop Garden

Biotop Garden D0060 Bedienungsanleitung

Profi-pumpe

Profi-pumpe JR-800LV Bedienungsanleitung

Sealey

Sealey WPP1100 Bedienungsanleitung

Pontec

Pontec PondoMax Eco 1500 Bedienungsanleitung

TIP

TIP WP 500-10 R Bedienungsanleitung

esotec

esotec Siena LED Bedienungsanleitung

Danner

Danner Pondmaster 1250 Bedienungsanleitung

Pond Boss

Pond Boss 52354 Bedienungsanleitung

TeichTip

TeichTip Sunsun Bio Pond Filter Set Bedienungsanleitung

Hozelock Cyprio

Hozelock Cyprio Cascade 5500 Bedienungsanleitung

Hozelock Cyprio

Hozelock Cyprio Aquaforce Series Bedienungsanleitung

HEISSNER

HEISSNER SPF 150-00 Bedienungsanleitung

AquaScape

AquaScape AQUAFORCE 4000-8000 Gebrauchsanweisung

Messner

Messner system-X 1501 Bedienungsanleitung