TotalPond MF13010 Bedienungsanleitung

ITEM # MF13010

Mechanical Filter Box

Up to 500 gallons

PACKAGE CONTENTS

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or

operate the product. Contact customer service for replacement parts.

•Estimated Assembly Time: 15 minutes

•No tools required for assembly.

PRODUCT DESCRIPTION

The MF113010 is a general purpose, mechanical / biological filter system. It is designed to filter the water

and promote healthy bacteria that will provide a balanced environment in your pond. This filter is designed

to work with a water pump that can circulate a minimum of 200 gallons per hour. As a pre-filter, the

MF13010 reduces pond debris and particulate before they enter the pump and other pond accessories.

This pre-filtration reduces the clogging of your pump and accessories and minimizes the need for cleaning.

Part Description Quantity

A Filter box top 1

B Filter box bottom 1

C Coarse filter pad 1

D Fine filter pad 1

E Bio media balls 10

Questions, problems, missing parts?

Before returning

to your retailer, call our customer service department at

1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday, or

email us at customercare@geoglobalpartners.com. Or

visit our website www.total-pond.com.

ASSEMBLY

INSTRUCTIONS

1. Place your pump inside the filter box, close to the center.

Make sure that the outlet points up. Route the cord through

the hole in the top corner of the filter box bottom. Fig. 1

NOTE: Pump is NOT INCLUDED. This filter is compatible

with pump models MD11300, MD11500, DD11210

DD11330 and DD11560.

Fig. 1

2. Place the bio-balls around the pump. Fig. 2

Fig. 2

3. Connect the extension tube to the outlet of the pump using

the adapter (adapter is part of fountain head kit). Fig. 3

NOTE: Fountain head kit (item #N6100) is NOT INCLUDED,

and is not required for operation.

Fig. 3

4. Place one of the fine filter pads over the bio-balls and pump.

Then place one of the coarse filter pads over the fine filter

pad. Fig. 4

NOTE: The fine filter pad is blue and the coarse filter pad is

black.

Fig. 4

Extension tube

Adapter

Pump

Filter box

bottom

Bio balls

Pump

Coarse filter pad

Fine filter pad

Filter box bottom

NOTE: From here, a coupler or a diverter valve can be used.

a. To flow water to the fountain head only, use the coupler. (Proceed to step 5)

b. To flow water to the fountain head and a spitter, use the diverter. (Skip to step 8)

5. Connect the two extension tubes with the coupler. Fig. 5

NOTE: Extension tubes and coupler are NOT INCLUDED.

Fig. 5

6. Place the filter box top over the filter box bottom and connect

the fountain head to the top extension tube. Fig. 6

NOTE: Fountain head kit is NOT INCLUDED.

Fig. 6

7. Place the filter assembly in the water. Fig. 7

Fig. 7

8. Place the filter box top on top of the filter box bottom. It

should snap closed. Fig. 8

Fig. 8

Extension

tube

Extension

tube

Coupler

Filter box

top

Fountain head

Filter box

top

Filter box

bottom

9. Connect the extension tubes to the diverter valve. Pay

attention to the markings on the ends of the diverter valve.

The end with the “P” connects to the pump. The end with the

“

↑

” points up, and connects to the fountain head. Fig. 9

NOTE: Tubes and diverter valve are NOT INCLUDED.

Fig. 9

10. For 1/2 in. tubing, connect the tubing onto the second output

of the diverter. Connect the other end of the tubing to a

spitter or other water feature. Fig. 10

NOTE: Tubing, diverter valve, and adapter are NOT

INCLUDED.

Fig. 10

11. Connect the fountain head to the top extension tube. Adjust

the diverter valve to split the flow between the fountain head

and the spitter. Fig. 11

NOTE: Fountain head kit is NOT INCLUDED.

Fig. 11

Extension tube

Diverter valve

1/2 in.

tubing

Fountain head

Diverter

valve 1/2 in.

tubing

Extension

tube Connect

to spitter

12. Place the filter assembly in the water. Fig. 12

Fig. 12

CARE AND MAINTENANCE

•Occasional cleaning of the filter pads will be necessary to ensure the proper functioning of the

system. The coarse filter pad is a designed to trap large debris. The fine filter pad catches smaller

particles. All pads should be removed and washed with clean water when they are visibly soiled.

•Filter pads should be replaced annually. The exterior surface of the filter box may also need

occasional cleaning. Particularly if the openings in the top of the filter box are obstructed. When

cleaning the filter box use warm water only. Do not use any chemicals that may destroy the

beneficial bacteria.

•The bio media balls in you filter system and the inside surfaces of the filter box contain the

beneficial bacteria. At least once a year the entire system should be disassembled and cleaned

thoroughly using warm, soapy water (mild detergent). This should not be done during the warm

season as it may take up to 8 weeks to re-establish the environmental balance. The best time of

the year to “breakdown” your system is in early spring before the water temperatures begin to rise.

This is also the ideal time to replace the filter pads.

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department

at 1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday.

Printed in China

Part Description

A Filter box top

B Filter box bottom

TotalPond replacement filters can be purchased at

Home Depot, item #RF13021.

Inhaltsverzeichnis

Andere TotalPond Wasserfiltersystem Handbücher

TotalPond

TotalPond 52229 Bedienungsanleitung

TotalPond

TotalPond 52231 Bedienungsanleitung

TotalPond

TotalPond 52229 Bedienungsanleitung

TotalPond

TotalPond 52236 Bedienungsanleitung

TotalPond

TotalPond PF1200UV Bedienungsanleitung

TotalPond

TotalPond 52301 Bedienungsanleitung

TotalPond

TotalPond 52236 Bedienungsanleitung

Beliebte Wasserfiltersystem Handbücher anderer Marken

Wisy

Wisy LineAir 100 Bedienungsanleitung

Schaffner

Schaffner Ecosine FN3446 Series Betriebsanleitung

Pentair

Pentair FLECK 4600 SXT Benutzerhandbuch

H2O International

H2O International H20-500 Bedienungsanleitung

Renkforce

Renkforce 2306241 Bedienungsanleitung

Neo-Pure

Neo-Pure TL3-A502 Bedienungsanleitung

FLTR

FLTR OBF Bedienungsanleitung

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Bedienungsanleitung

Applied Membranes

Applied Membranes W-G844EM Bedienungsanleitung

BEGA

BEGA 116 Bedienungsanleitung

WATA

WATA Standard Bedienungsanleitung

Price

Price FFU series Handbuch

Gaggenau

Gaggenau BRITA INTENZA 467873 Bedienungsanleitung

Brita

Brita SAFF-100 Bedienungsanleitung

HEISSNER

HEISSNER FPU24000-00 Bedienungsanleitung

BGS technic

BGS technic 1518 Bedienungsanleitung

Reverse Osmosis

Reverse Osmosis RF Series Bedienungsanleitung

ubbink

ubbink Filtramax Series Bedienungsanleitung