Toto CST436 Montageanleitung

Warranty Registration and Inquiry

For product warranty registration, TOTO U.S.A. Inc. recommends online warranty registration. Please visit

our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please

contact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260

(888) 295-8134 or (678) 466-1300 when calling from outside of U.S.A.

No CEFIONTECT®

With CEFIONTECT®

WHAT IS

CEFIONTECT®?

CEFIONTECT® MAINTENANCE INSTRUCTIONS

CEFIONTECT® glaze is TOTO’s patented super-smooth permanent

glazing that prevents debris from sticking to surfaces.

Toilets and lavatories are made of ceramic – a porous material that allows

mold and particles to stick to the surface creating stains, scaling and

build-up.

CEFIONTECT® glaze, along with regular cleaning, will keep your TOTO

products in pristine condition.

NOTE:

For regular cleaning of your TOTO product with CEFIONTECT®:

• Use a mild dish detergent to clean your lavatory.

• Use a gel-based toilet bowl cleaner.

• Use a soft cloth to clean your lavatory.

• Use a soft-bristled plastic brush to clean your toilet.

• Don’t use cleanser, polishing powders or detergents that

have gritty or coarse particles.

• Don’t use bleach, chemical thinners, or products that include

acid or alkaline detergents in their ingredients.

• Don’t use metal scrub brushes or steel wool.

Following these cleaning instructions will ensure that the CEFIONTECT®

glaze on your product will remain intact, keeping your TOTO product

beautiful for years to come.

Installation and Owner’s Manual

Manual de instrucciones y del propietario

Manuel d’installation et d’utilisation

Dual-ush Toilet

Inodoro de doble descarga

Toilettes à double chasse d’eau

CST436

CST448

* Actual parts may appear different from drawing according to the model.

* El producto real puede variar en apariencia dependiendo del modelo.

* Le produit réel peut varier en apparence en fonction du modèle.

ENGLISH

COMMON TOOLS NEEDED

TABLE OF CONTENTS

THANKS FOR CHOOSING TOTO!

The mission of TOTO is to provide the world with healthy, hygienic and more

comfortable lifestyles. We design every product with the balance of form and

function as a guiding principle. Congratulations on your choice.

INCLUDED PARTS

Thanks for Choosing TOTO! ..............................................................................2

Included Parts ......................................................................................................2

Common Tools Needed......................................................................................2

Before Installation................................................................................................3

Installation Procedure...................................................................................... 4-6

Maintenance Instruction......................................................................................7

Care and Cleaning...............................................................................................8

Replacing the Fill Valve .......................................................................................8

Adjusting the Water Level...................................................................................8

Servicing Fill Valve ...............................................................................................9

Servicing Flush Tower........................................................................................10

Warranty..............................................................................................................11

10” adjustable wrench

Carpenters’ level

Tape measure

Hand pliers

Flat head screwdriver

Phillips screwdriver

Pencil

Putty knife

Drill

Drill bits (mounting block)

For wood oor installation:

- ⁄” drill bit

For concrete/tile installation:

- ⁄” drill bit

Check to make sure you have the following parts included in your package*:

Flexible supply hose

Angle stop valve (1/2” compression to 7/8”Ballcock)

Wax ring

Toilet Seat

MATERIALS REQUIRED:

(Not Included)

Toilet Tank

Tank to Bowl

Mounting Hardware

Rough-in

Bowl Mounting

Hardware

Template

Manual

Unifit Rough-in

Instruction

Rough-in

Mounting Hardware

Fill Valve

Cone Washer (1x)

Fill Valve T-Nut (1x)

ENGLISH

BEFORE INSTALLATION

Read these instructions thoroughly before beginning work.

Please leave instructions for customers. These instructions contain

maintenance and warranty information.

If necessary, remove the existing toilet and if new construction, purge the

supply line.

Due to the powerful performance of our Tornado, G-Max, E-Max and Power

Gravity ushing systems, they are not specied for back-to-back installations.

The only means of installing these toilets in a back-to-back situation is when

the toilet drain connections incorporate a WYE tting. Please contact your

builder or contractor prior to this installation.

Double Combination WYE / 1/8 Bend

YES Double Sanitary Tee / Sanitary Cross

NOTICE

Water supply shut-off valve installation recommendations

Follow these recommendations to ensure an optimal and trouble-free

installation with a neat and professional appearance.

Location

(From oor and left of

center of oor ange)

4-3/4” x 4-3/4” (120mm x 120mm)

Valve type

Angle stop type valve with supply connection

facing upward, inward, or downward

NOTE: Straight stop type valve, or valve with

supply connection on front of angle stop, is not

recommended

Maximum length Angle stop must not protrude more than 3-1/2”

(90mm) from wall

Centerline of

Stop valve

Finished wall

4¾”

(120mm)

Centerline of

Flange

4¾”

(120mm)

3½”(90mm) MAX

“RI”

ENGLISH

Screw

Washer

Nut

Wax seal

INSTALLATION PROCEDURE

1. Open the Unit Rough-In packaging.

Follow the Installation instruction to

complete the installation (ill. 1).

2. Place the template into position and

follow its instructions to prepare for

installing the toilet bowl.

Do not move the Unit Rough-

In on the Floor Flange after

wax seal is set. If this notice is

disregarded, discard the wax ring

and replace with new wax ring.

3. Place the toilet bowl over the Unit

Rough-In and the two mounting blocks,

by aligning the bowl outlet with the

Unit Rough-In opening (ill. 2).

4. Align the toilet perpendicular to the

back wall and parallel to side walls; it

should not sit crooked or diagonal (ill. 3).

Mounting block

Unit

Insert the toilet all the way

into position. If this notice is

disregarded, leakage may result.

NOTICE

ill.1

ill.2

ill.3

ENGLISH

Flush valve nut

Fill valve nut

Metal Washer

Brass

Nut

Rubber Washer

Bolt

Cut Away View

Make sure that the ll valve does not turn and

hit the tank while tightening.

8. Connect the water supply hose to the ll valve threads as

seen at the bottom of toilet tank (Ill. 7). Tighten this

connection ﬁnger tight.

The water supply hose must be connected

to the ll valve BEFORE the tank-to-bowl

installation. TOTO recommends using a

longer exible supply hose.

5. Install the side screws to the mounting blocks.

Cover the screw head with the provided screw

caps (ill. 4).

6. Install the tank-to-bowl mounting hardware to

the tank (ill. 5). Lay the tank down on its back.

Place a rubber washer onto a bolt. Reach

inside the tank and position the bolt through

one of the holes in the bottom of the tank. On

the outside of the tank, place a metal washer

and nut onto the bolt. Hold the bolt centered

in the hole and tighten the nut ﬁnger tight. Turn

the nut an additional 1/2 turn with a wrench.

Repeat this process for the remaining hole in

the tank.

Do NOT overtighten hardware,

as it may break the china and

cause personal injury or property

damage.

7. Place the tank upside down onto some

padding. Inspect the smaller ll valve nut and

larger ush valve nut for a secure connection

(ill. 6). Try to tighten the nuts with your hands.

If loose, tighten the nut hand tight and an

additional 1/4 turn for the smaller ll valve nut

and an additional 1/2 turn for the larger ush

tower nut.

Cap

Side-screw

Cap

Side-screw

ill.4

ill.5

ill.6

INSTALLATION PROCEDURE

⚠CAUTION

NOTICE

7/8” Ballcock Thread

HAND TIGHTEN ONLY

Ill. 6

ill.7

ENGLISH

9. Place the tank-to-bowl gasket onto the ush

tower nut (ill. 8). While pressing down, spread the

gasket over the nut until the gasket touches the

bottom of the tank. A slight gap between the

tank bottom and the gasket is allowable.

10. Pick up the tank and carefully guide the

water supply hose into the bowl’s ll valve

hole, align the tank-to-bowl gasket over the

inlet of the bowl, and align the tank bolts

over the bolt holes of the bowl. (ill.9)

11. Using provided hand-tight nuts, hand

tighten the nuts evenly until tank sets

snugly on each of the 3 contact points

on the bowl (ill. 10). Do not overtighten.

Overtightening may break the china and

cause personal injury and/or property

damage.

12. Flush the water supply line for a few

seconds to remove any debris that may

enter the new ﬁll valve. (For new home

constructions and/or additions, ﬂush the

water supply line for more than a minute to

help remove any residual PVC adhesives,

solder ﬂux, and/ or pipe sealants that were

used for the new plumbing.)

13. Install the exible water supply hose to the

angle stop (ill. 11). Make sure that the hose

is free of kinks.

14. Carefully place the lid on top of the tank.

NOTE: The water supply pressure should

be 20 to 80 psi static.

15. Flush toilet a few times to check for issues

and leaks. Make sure NO WATER LEAK on

bowl and tank.

CAUTION: Avoid using a wrench to tighten

the connection as you may damage the

plastic threads and/or cause the ﬁll valve to

rotate inside the tank.

INSTALLATION PROCEDURE

Points of Contac t

ill.10

50 mm radius minimum Make sure there are no kinks

ill. 9

ill.11

Tank to Bowl

Gasket

Fill Valve Nut Flush Valve Nut

ill.8

Hand Tight Nut

ill.9

Use of tools prohibited

E-5

ENGLISH

Ill.1

MAINTENANCE INSTRUCTIONS

1. Turn off water supply and ﬂush the toilet.

2. Remove the tank lid and place it upside

down on a clean surface. Remove the remain-

ing water from tank with a sponge.

3. Pull the clip on top of trip lever gear box as

shown. (ill. 1)

4. Pull gear box away. (ill. 2)

5. Rotate ush tower until arrow aligns with

overow tube and then pull up to remove.

(ill. 3)

6. Remove the grey rubber seal gasket and

rinse under running water to clean. (ill. 4)

7. Place the gasket back on the ﬂush tower.

8. Align and place the ﬂush tower into housing

and rotate to lock into place.

9. Replace the trip lever gear box and push

down on lever to lock it in place.

10. Carefully install the tank lid back on the tank.

11. Flush the toilet several times making sure the

trip lever operates normally.

12. Check the water level in the tank and inspect

for signs of any leakage.

Replacing the Flush Tower

Ill.2

Ill.4 Rubber

Gasket

ill.1

ill.2

ill.3

ill.4

ArrowArrow

Tube

ENGLISH

REPLACING THE FILL VALVE

1. Shut off the water supply. Flush the toilet and

remove any remaining water from the tank. Reverse

the tank installation instructions to remove it from

the bowl. Remove the rell tube from the overow

tube and ll valve. Note the orientation of the ll

valve. Remove the old ll valve.

2. Install new ll valve by sliding the threaded portion

of the shaft through the hole in the bottom of tank.

3. Thread mounting nut onto exposed shaft under the

tank and tighten nut. Check ll valve orientation.

Refer to the water level line stamp inside the tank.

1. The water level adjustment is located in the top

end of the ll valve. Use a athead screwdriver to

make adjustments:

• To raise the water level: turn the screwdriver

clockwise, or towards the ‘+’ indicator.

• To lower the water level: turn the screwdriver

counter-clockwise, or towards the ‘-’

indicator.

2. Flush after each adjustment to check the water

level. When satised with the water level, ush

once more to verify.

Flexible hose

Coupling nut

Nut

Washer

Cone seal

Ill. 1

ADJUSTING THE WATER LEVEL

⚠CAUTION

water level adjuster

Ill. 1

CARE AND CLEANING

DO NOT USE IN-TANK BOWL CLEANERS.

The use of high concentration of chlorine or chlorine-related products can

seriously damage ttings in the tank. This damage can cause leakage and

property damage. TOTO shall not be responsible or liable for any tank tting

failure or damage caused by the use of in-tank bowl cleaners.

NOTICE

Use a detergent or non-abrasive toilet cleaner and a soft bristled

plastic brush to clean your toilet. To remove hard water stains, use

vinegar or lime dissolving cleaner and a non-scratch scour pad made

for porcelain. Allow a little contact time to allow the cleaner to dis-

solve the buildup.

Do not over-tighten.

4. Connect the water supply (Ill. 1). Pipe dope is not recommended. Attach the

rell tube to the ll valve and clip the other end to the overow pipe.

Special

Tool

ENGLISH

1. Snap off the top cover by pulling from under the tab (ill. 1).

2. Pinch the tabs of the lever arm to allow its removal (ill. 2).

3. Snap off the adjustable rod from the bracket allowing the unit to slide to

the bottom and remove the retainer tab by pulling as the arrow indicates

(ill. 3).

4. Grab hold of the valve unit, twist 1/4 turn counterclockwise and pull the

unit out (ill. 4).

5. Unscrew nut of the diaphragm housing (ill. 5).

6. Remove the diaphragm from its housing by carefully pulling the edge

of the diaphragm (ill. 6). Note the position of the diaphragm while

removing.

7. Remove the strainer from the tube with needle nose pliers (ill. 7). Use

twisting motion while pulling to help with removal.

8. Rinse all parts under running water to clear any debris, residues or lms.

Reinstall all parts in reverse order. Turn the water ON and check for leaks

and operation.

Ill. 6

SERVICING THE FILL VALVE

Ill. 4

Ill. 5

NOTE: Due to water conditions in your area, the strainer may require periodic clean-

ing. An indication that the strainer requires service can be seen in a delayed ll cycle,

intermittent ll cycle, or inadequate amount of water ow from the rell tube.

ill.1

ill.5

ill.2

ill.6

ill.3

ill.7

ill.4

ENGLISH

SERVICING THE FLUSH TOWER

1. Turn off water supply and ush the toilet.

2. Remove the tank lid and place it upside down on a clean surface.

3. Note the orientation of the ush tower for reassembly.

4. Rotate the upper half of the ush tower so the arrow points towards

the overow tube and pull it up to remove it (ill. 1)

5. Remove the rubber seal gasket and rinse under running water to clean

(see Ill. 2).

6. Place the gasket back on the ush tower (Ill. 3).

7. Align arrow with the overow tube and install the ush tower back on

the base.

8. Rotate the ush tower to the same orientation (step 3).

9. Carefully, install the tank lid back on the tank.

10. Flush the toilet several times to verify proper operation. Check for

leakage.

ill.1 ill.2 ill.3

Andere Handbücher für CST436

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Toto Toilette Handbücher

Toto

Toto CS818 Series Bedienungsanleitung

Toto

Toto NEOREST Bedienungsanleitung

Toto

Toto CS761P Series Bedienungsanleitung

Toto

Toto NEOREST Bedienungsanleitung

Toto

Toto NEOREST Bedienungsanleitung

Toto

Toto WH173BT Series Bedienungsanleitung

Toto

Toto Aquia CST412MF Bedienungsanleitung

Toto

Toto CST423SF Bedienungsanleitung

Toto

Toto MS604114 Series Bedienungsanleitung

Toto

Toto MS636D Series Bedienungsanleitung

Toto

Toto CS985VA Bedienungsanleitung

Toto

Toto Villeroy & Boch VICLEAN-U Bedienungsanleitung

Toto

Toto NEOREST Bedienungsanleitung

Toto

Toto Giovannoni TCF892G Bedienungsanleitung

Toto

Toto Washlet TCF4914E Series Bedienungsanleitung

Toto

Toto Maris CT486FG Bedienungsanleitung

Toto

Toto CS735 Series Bedienungsanleitung

Toto

Toto CS320P Series Bedienungsanleitung

Toto

Toto AP WASHLET CWT4263046CMFG Bedienungsanleitung

Toto

Toto UT105U Bedienungsanleitung

Toto

Toto washlet Bedienungsanleitung

Toto

Toto DRAKE CST775 Bedienungsanleitung

Toto

Toto CS945P Series Bedienungsanleitung

Toto

Toto MS914R Series Bedienungsanleitung

Beliebte Toilette Handbücher anderer Marken

Kohler

Kohler K-6419 Bedienungsanleitung

Grohe

Grohe Sensia ARENA Bedienungsanleitung

Kohler

Kohler K-5171K Montageanleitung

Geberit

Geberit AQUACLEAN MERA CLASSIC Bedienungsanleitung

Kohler

Kohler K-24097X Montageanleitung

Better Bathrooms

Better Bathrooms BUN/BeBa 27555/78725 Bedienungsanleitung

American Standard

American Standard CONCEPT Cube TF-2704 Bedienungsanleitung

BIOLAN

BIOLAN ECO Stücklistenhandbuch

Thetford

Thetford C260 Series Bedienungsanleitung

KELISS

KELISS T162A Series Bedienungsanleitung

Kohler

Kohler K-22241K Montageanleitung

Kohler

Kohler ESCALE K-32771T-NS Bedienungsanleitung

BIOLAN

BIOLAN GARDEN TOILET Stücklistenhandbuch

washloo

washloo Prestige Bedienungsanleitung

JABSCO

JABSCO 37010 Series Bedienungsanleitung

Olympia

Olympia EPOQUE 69209 Bedienungsanleitung

DENCK

DENCK PURE-D Bedienungsanleitung

Silent Venus

Silent Venus SVP600 Wartungs- und Serviceanleitung