3
New for Tourmaster®Synergy®Pro-Plus 12v heated riding apparel is the use of an op-
tional 12v lithium-ion battery power source. 12v lithium battery information can be found
on the back cover of this manual and is available from your preferred Tourmaster®dealer.
Run times for each garment using compatible 12v lithium-ion battery are as follows, and
approximation based on full charge.
1. Locate the battery compartment on each garment.
• On the jacket/vest, this compartment is on the lower left torso, and is accessible
by a waterproof zipper.
• On pants, this compartment is located on the left side just below the waist.
2a. On the jacket/vest, locate the male connecting plug, and feed through the yellow
port found on the inside of the jacket.
2b. On the pants, the male connecting plug is found inside the battery compartment. No
additional steps are needed.
3. Firmly plug the male end of the connector into the female port found on the
Tourmaster®Synergy®Pro-Plus 12v lithium-ion battery.
4. With the lithium-ion battery rmly installed, safely secure the battery inside the
holding compartment by zipping closed.
5. Power on, and use the garment using the same steps when connecting directly
to the bike’s power source.
NOTE: To charge your Tourmaster®Synergy®Pro-Plus lithium-ion battery,
simply plug the male connector into the female port of the battery, and plug
charger into a suitable wall outlet. The battery is fully charged when light on
charger turns from RED to GREEN. Approximate full charge time is 3:50 hours.
(NOTE: Tourmaster®Synergy®Pro-Plus 12v gloves, glove liners, and sock liners
will power from the 12v lithium-ion battery when connected to ject/vest/pants.
Connecting additional accessories to the jacket/vest/pants will decrease runtime.)
SYNERGY®PRO-PLUS 12-VOLT LITHIUM-ION RUNTIMES
SYNERGY
®
GARMENT
LOW MEDIUM HIGH
JACKET 5.0 Hours 2.5 Hours 1.5 Hours
VEST 5.0 Hours 2.5 Hours 1.5 Hours
PANTS 3.0 Hours 2.0 Hours 1.5 Hours
