POWER
SAVER
OPERATION
The PowerSavermode reducesthefrequency
of ignition
actions,to save
electricconsumption.
Press
the POWER
SAVERbutton "ON" to startthe operation
ofthe "POWER
SAVER".
Whenthe room temperatureexceedsthe selectedsettingby approximately
10"F,the heaterwill automatical-
ly shut off.As the room temperaturebecomes
lowerthan the selectedsetting,
the heaterwill automatically
re-start
to maintainthe desiredtemperature.
● lstTIMER O POWER SAVER
●2nd T!MER
Approx. +
Approx. +
ぴ Ｔ
High
/
Medium Low Off Re-lgnition
SET
TEMP
TIMER
OPERATION
"TIMER' operation
is programmed
for particular
time of hour and temperature,
in orderto saveenergy
when
theheaterisusedatnight
orwhile
you leave
home.
NOTE:The Laser30has
a dualtimer feature
(this
isnot an automaticsetback).
The timer featureallows a userto manually lower the temperature
(setby user)
until a certaintime of day
(set
by user)by pressing
atimer button.This button must be pushed
eachtime you want thetemperature
to
drop back.
lt is not automatic.There are two timer buttons on the Laser
30, 1st
timer and 2nd timer. This
affows for two different
temperaturedrop backs
per
24hour period.
Examplelst Timer:
Your normal room temperatureis set for 70 degrees.You
workfrom 8 am until5pm.
Youwant
theroom
temperature
to
drop to 62 degreeswhile you are at work and you want the
room to return
to 70degreesat 4 pm so it will bewarm when
you get home.Whenyou leave
for work you must press
the
1st
timer buttonto activatethe timer.
The
temperaturewill
dropto 62degreesandreturn
to 70
degreesat
4pm.
Example2nd Timer:
Your normal room temperatureis set of 70 degrees.When
you go to bed, you want the temperatureto drop to 65
degrees.
You get up at 6 am and want the room warm
when you get up.When you go to bed,
you must pushthe
2nd timer button to activate
timer. The temperaturewill
drop to 65 degrees
and staythere untilthe time at which
you set
(5:00
am)
the until
to return
to normal
temperature.
Press"1st" Timer Press
"2nd" Timer
button.
(7:00AM) button.
(11:00PM)
10
